BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//Kendall Electric - ECPv6.17.1//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-WR-CALNAME:Kendall Electric
X-ORIGINAL-URL:https://www.kendallelectric.com
X-WR-CALDESC:Events for Kendall Electric
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:America/New_York
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20230312T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20231105T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20240310T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20241103T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20250309T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20251102T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20260308T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20261101T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20270314T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20271107T060000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260728T083000
DTEND;TZID=America/New_York:20260730T163000
DTSTAMP:20260721T141053Z
CREATED:20260107T163200Z
LAST-MODIFIED:20260721T141053Z
UID:10006519-1785227400-1785429000@www.kendallelectric.com
SUMMARY:Motion Control Fundamentals using Kinetix 5700 (CIP) Servo Drives
DESCRIPTION:CCN132 presented by Rockwell Automation. \nUpon completion of this course\, you should be able to demonstrate fundamental motion control concepts common to all Rockwell Automation motion control systems. \nThis course is designed to provide you with an understanding of the concepts\, terminology\, functionality\, and applications of motion control. This course will also allow you to establish the foundation you need before learning the skills necessary to maintain and program motion control systems. \nThis course does not address motion control system design or specific motion control software programming. If you are seeking training in these areas\, you should enroll in the relevant Rockwell Automation training courses\, making sure you have fulfilled the prerequisites for those courses prior to enrollment.
URL:https://www.kendallelectric.com/event/motion-control-fundamentals-using-kinetix-5700-cip-servo-drives-9/
LOCATION:Kendall Electric – Holland\, 11581 Green Way Drive\, Holland\, MI\, 49424\, United States
CATEGORIES:Great Lakes North,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Motion-Control.jpg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:42.8081538;-86.0677026
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Holland 11581 Green Way Drive Holland MI 49424 United States;X-APPLE-RADIUS=500;X-TITLE=11581 Green Way Drive:geo:-86.0677026,42.8081538
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260708T120000
DTEND;TZID=America/New_York:20260708T153000
DTSTAMP:20260610T143130Z
CREATED:20260407T203809Z
LAST-MODIFIED:20260610T143130Z
UID:10006656-1783512000-1783524600@www.kendallelectric.com
SUMMARY:Introduction to FactoryTalk Optix - PM Session
DESCRIPTION:Discover a new approach to visualization and learn the fundamentals of FactoryTalk Optix. Build your first project using core tools such as style sheets\, templates\, and global objects. Explore modern design software and scalable deployment options that simplify development. \nTopics: \n\nOverview of FactoryTalk Optix\nKey features & Capabilities\nHands-on Lab & Demonstrations\nHMI Panel Solutions.\n\nLunch is included.
URL:https://www.kendallelectric.com/event/introduction-to-factorytalk-optix-pm-session-9/
LOCATION:Kendall Electric – Holland\, 11581 Green Way Drive\, Holland\, MI\, 49424\, United States
CATEGORIES:Great Lakes North,Kendall Technology Update
ATTACH;FMTTYPE=image/png:https://www.kendallelectric.com/wp-content/uploads/2026/03/image-32.png
ORGANIZER;CN="Dan Pelton":MAILTO:dan.pelton@kendallelectric.com
GEO:42.8081538;-86.0677026
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Holland 11581 Green Way Drive Holland MI 49424 United States;X-APPLE-RADIUS=500;X-TITLE=11581 Green Way Drive:geo:-86.0677026,42.8081538
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260708T080000
DTEND;TZID=America/New_York:20260708T113000
DTSTAMP:20260610T143137Z
CREATED:20260407T203622Z
LAST-MODIFIED:20260610T143137Z
UID:10006655-1783497600-1783510200@www.kendallelectric.com
SUMMARY:Introduction to FactoryTalk Optix - AM Session
DESCRIPTION:Discover a new approach to visualization and learn the fundamentals of FactoryTalk Optix. Build your first project using core tools such as style sheets\, templates\, and global objects. Explore modern design software and scalable deployment options that simplify development. \nTopics: \n\nOverview of FactoryTalk Optix\nKey features & Capabilities\nHands-on Lab & Demonstrations\nHMI Panel Solutions.\n\nLunch is included.
URL:https://www.kendallelectric.com/event/introduction-to-factorytalk-optix-am-session-9/
LOCATION:Kendall Electric – Holland\, 11581 Green Way Drive\, Holland\, MI\, 49424\, United States
CATEGORIES:Great Lakes North,Kendall Technology Update
ATTACH;FMTTYPE=image/png:https://www.kendallelectric.com/wp-content/uploads/2026/03/image-32.png
ORGANIZER;CN="Dan Pelton":MAILTO:dan.pelton@kendallelectric.com
GEO:42.8081538;-86.0677026
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Holland 11581 Green Way Drive Holland MI 49424 United States;X-APPLE-RADIUS=500;X-TITLE=11581 Green Way Drive:geo:-86.0677026,42.8081538
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260618T083000
DTEND;TZID=America/New_York:20260619T163000
DTSTAMP:20260413T130017Z
CREATED:20260107T162825Z
LAST-MODIFIED:20260413T130017Z
UID:10006517-1781771400-1781886600@www.kendallelectric.com
SUMMARY:Studio 5000 Logix Designer Level 2: Basic Ladder Logic Programming
DESCRIPTION:CCP151 presented by Rockwell Automation. \nAfter completing this course\, you should be able to program basic ladder logic instructions for Logix5000™ controllers. This is a skill-building course that provides you with the resources and hands-on practice required to complete this objective. \nYou will have an opportunity to use the Studio 5000 Logix Designer® application to perform basic software tasks to meet the requirements of a given functional specification. In addition\, you will set up a sequencer to run equipment through a predefined procedure and separate production procedure from equipment control.
URL:https://www.kendallelectric.com/event/studio-5000-logix-designer-level-2-basic-ladder-logic-programming-52/
LOCATION:Kendall Electric – Holland\, 11581 Green Way Drive\, Holland\, MI\, 49424\, United States
CATEGORIES:Great Lakes North,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Software.jpg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:42.8081538;-86.0677026
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Holland 11581 Green Way Drive Holland MI 49424 United States;X-APPLE-RADIUS=500;X-TITLE=11581 Green Way Drive:geo:-86.0677026,42.8081538
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260616T083000
DTEND;TZID=America/New_York:20260617T163000
DTSTAMP:20260413T125905Z
CREATED:20260107T162443Z
LAST-MODIFIED:20260413T125905Z
UID:10006515-1781598600-1781713800@www.kendallelectric.com
SUMMARY:Studio 5000 Logix Designer Level 1: ControlLogix System Fundamentals
DESCRIPTION:CCP146 presented by Rockwell Automation. \nAfter completing this course\, you should be able to perform basic ControlLogix® and Studio 5000 Logix Designer® tasks\, such as: \n\nCreating and configuring a project\nCommunicating with a controller\n\nThe course will assist you in developing and building a solid foundation with a fundamental knowledge of ControlLogix and other Logix5000™ systems. You will be introduced to basic Logix5000 concepts and terminology\, and you will be exposed to Logix5000 system hardware\, including hands-on experience with the ControlLogix platform.
URL:https://www.kendallelectric.com/event/studio-5000-logix-designer-level-1-controllogix-systen-fundamentals/
LOCATION:Kendall Electric – Holland\, 11581 Green Way Drive\, Holland\, MI\, 49424\, United States
CATEGORIES:Great Lakes North,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Software.jpg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:42.8081538;-86.0677026
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Holland 11581 Green Way Drive Holland MI 49424 United States;X-APPLE-RADIUS=500;X-TITLE=11581 Green Way Drive:geo:-86.0677026,42.8081538
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260401T090000
DTEND;TZID=America/New_York:20260403T163000
DTSTAMP:20260327T190544Z
CREATED:20250911T165554Z
LAST-MODIFIED:20260327T190544Z
UID:10006989-1775034000-1775233800@www.kendallelectric.com
SUMMARY:Fundamentals of VFD 525 Wiring and Commissioning
DESCRIPTION:Learn how to install\, test\, start-up\, and troubleshoot basic PowerFlex 525 VFD applications.\nLearn how to wire\, program\, and operate Variable Frequency Drives during this three-day course that covers a combination of instructor-led discussions\, demonstrations\, and hands-on labs. \nUsing a VFD workstation\, HMI module and hand-held VFD test module\, students will leave with a better understanding of various control configurations and applications. Students will also test and troubleshoot VFDs using Fluke test and measurement equipment. \nSession Topics: \n\nPowerFlex 525 and 755TS Drive Hands Labs\nTesting VFD Power Components\nAC Motor Fundamentals and Measurements\nInstallation Considerations\nPower and Control Wiring Configurations\nVFD Application Techniques and Parameter Adjustments\nEthernet Communications Configuration\nVoltage and Current Measurements using Fluke VOM® and Clamp Ammeter
URL:https://www.kendallelectric.com/event/fundamentals-of-vfd-525-wiring-and-commissioning-6/
LOCATION:Kendall Electric – Holland\, 11581 Green Way Drive\, Holland\, MI\, 49424\, United States
CATEGORIES:Great Lakes North,Kendall Connected Training
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2025/01/drives-event-image.jpg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:42.8081538;-86.0677026
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Holland 11581 Green Way Drive Holland MI 49424 United States;X-APPLE-RADIUS=500;X-TITLE=11581 Green Way Drive:geo:-86.0677026,42.8081538
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260331T090000
DTEND;TZID=America/New_York:20260331T163000
DTSTAMP:20260327T190444Z
CREATED:20250908T204513Z
LAST-MODIFIED:20260327T190444Z
UID:10006456-1774947600-1774974600@www.kendallelectric.com
SUMMARY:Rockwell Automation Variable Frequency Drives: Backup\, Replace\, Restore\, and Redeploy
DESCRIPTION:Get hands-on experience returning failed automation equipment back to service.\nDesigned specifically for maintenance personnel and electricians\, this one-day course gives students the opportunity to work with a fully functional automated system that contains all of the target VFDs\, PanelView terminals\, PLCs\, Servos\, & industrial switches. Students will systematically one-by-one backup\, replace\, restore\, and return to service each device using detailed step-by step and pictorially illustrated labs. \nLab manuals included in this course can be used for future reference when replacing equipment on the plant floor. \nProducts covered:\nVariable Frequency Drives (VFDs)\nPowerFlex 525\, PowerFlex 755\, PowerFlex 527\nKinetix Servos\nKinetix 5300\, Kinetix 5500
URL:https://www.kendallelectric.com/event/rockwell-automation-variable-frequency-drives-backup-replace-restore-and-redeploy-21/
LOCATION:Kendall Electric – Holland\, 11581 Green Way Drive\, Holland\, MI\, 49424\, United States
CATEGORIES:Great Lakes North,Kendall Connected Training
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2025/01/drives-event-image.jpg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:42.8081538;-86.0677026
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Holland 11581 Green Way Drive Holland MI 49424 United States;X-APPLE-RADIUS=500;X-TITLE=11581 Green Way Drive:geo:-86.0677026,42.8081538
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260330T090000
DTEND;TZID=America/New_York:20260330T163000
DTSTAMP:20260327T190358Z
CREATED:20250911T173527Z
LAST-MODIFIED:20260327T190358Z
UID:10006471-1774861200-1774888200@www.kendallelectric.com
SUMMARY:Introduction to Logix PID
DESCRIPTION:Get hands-on with Logix in these 1-day instructor-led training sessions.\n\nFlexible – only choose the days you want\nScalable – classes cover various skill levels\nIndividual – students will be provided with individual lab stations\n\nSessions Available: \n\nIntro to Logix\nIntermediate Logix\nAdvanced Logix\nLogix PID\nLogix Troubleshooting
URL:https://www.kendallelectric.com/event/introduction-to-logix-pid-2/
LOCATION:Kendall Electric – Holland\, 11581 Green Way Drive\, Holland\, MI\, 49424\, United States
CATEGORIES:Great Lakes North,Kendall Connected Training
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2024/08/Workstation_Micro820-PLC-scaled.jpg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:42.8081538;-86.0677026
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Holland 11581 Green Way Drive Holland MI 49424 United States;X-APPLE-RADIUS=500;X-TITLE=11581 Green Way Drive:geo:-86.0677026,42.8081538
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260327T090000
DTEND;TZID=America/New_York:20260327T163000
DTSTAMP:20250911T172942Z
CREATED:20250911T172942Z
LAST-MODIFIED:20250911T172942Z
UID:10006469-1774602000-1774629000@www.kendallelectric.com
SUMMARY:Advanced Logix
DESCRIPTION:Get hands-on with Logix in these 1-day instructor-led training sessions.\n\nFlexible – only choose the days you want\nScalable – classes cover various skill levels\nIndividual – students will be provided with individual lab stations\n\nSessions Available: \n\nIntro to Logix\nIntermediate Logix\nAdvanced Logix\nLogix PID\nLogix Troubleshooting
URL:https://www.kendallelectric.com/event/advanced-logix-9/
LOCATION:Kendall Electric – Holland\, 11581 Green Way Drive\, Holland\, MI\, 49424\, United States
CATEGORIES:Great Lakes North,Kendall Connected Training
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2024/08/Workstation_Micro820-PLC-scaled.jpg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:42.8081538;-86.0677026
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Holland 11581 Green Way Drive Holland MI 49424 United States;X-APPLE-RADIUS=500;X-TITLE=11581 Green Way Drive:geo:-86.0677026,42.8081538
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260326T090000
DTEND;TZID=America/New_York:20260326T163000
DTSTAMP:20250911T172423Z
CREATED:20250911T172423Z
LAST-MODIFIED:20250911T172423Z
UID:10006466-1774515600-1774542600@www.kendallelectric.com
SUMMARY:Intermediate Logix Troubleshooting
DESCRIPTION:Get hands-on with Logix in these 1-day instructor-led training sessions.\n\nFlexible – only choose the days you want\nScalable – classes cover various skill levels\nIndividual – students will be provided with individual lab stations\n\nSessions Available: \n\nIntro to Logix\nIntermediate Logix\nAdvanced Logix\nLogix PID\nLogix Troubleshooting
URL:https://www.kendallelectric.com/event/intermediate-logix-troubleshooting-10/
LOCATION:Kendall Electric – Holland\, 11581 Green Way Drive\, Holland\, MI\, 49424\, United States
CATEGORIES:Great Lakes North,Kendall Connected Training
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2024/08/Workstation_Micro820-PLC-scaled.jpg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:42.8081538;-86.0677026
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Holland 11581 Green Way Drive Holland MI 49424 United States;X-APPLE-RADIUS=500;X-TITLE=11581 Green Way Drive:geo:-86.0677026,42.8081538
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260325T090000
DTEND;TZID=America/New_York:20260325T163000
DTSTAMP:20250911T171914Z
CREATED:20250911T171914Z
LAST-MODIFIED:20250911T171914Z
UID:10006463-1774429200-1774456200@www.kendallelectric.com
SUMMARY:Intermediate Logix
DESCRIPTION:Get hands-on with Logix in these 1-day instructor-led training sessions.\n\nFlexible – only choose the days you want\nScalable – classes cover various skill levels\nIndividual – students will be provided with individual lab stations\n\nSessions Available: \n\nIntro to Logix\nIntermediate Logix\nAdvanced Logix\nLogix PID\nLogix Troubleshooting
URL:https://www.kendallelectric.com/event/intermediate-logix-16/
LOCATION:Kendall Electric – Holland\, 11581 Green Way Drive\, Holland\, MI\, 49424\, United States
CATEGORIES:Great Lakes North,Kendall Connected Training
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2024/08/Workstation_Micro820-PLC-scaled.jpg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:42.8081538;-86.0677026
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Holland 11581 Green Way Drive Holland MI 49424 United States;X-APPLE-RADIUS=500;X-TITLE=11581 Green Way Drive:geo:-86.0677026,42.8081538
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260324T090000
DTEND;TZID=America/New_York:20260324T163000
DTSTAMP:20250911T171500Z
CREATED:20250911T171500Z
LAST-MODIFIED:20250911T171500Z
UID:10006991-1774342800-1774369800@www.kendallelectric.com
SUMMARY:Intro to Logix Troubleshooting
DESCRIPTION:Get hands-on with Logix in these 1-day instructor-led training sessions.\n\nFlexible – only choose the days you want\nScalable – classes cover various skill levels\nIndividual – students will be provided with individual lab stations\n\nSessions Available: \n\nIntro to Logix\nIntermediate Logix\nAdvanced Logix\nLogix PID\nLogix Troubleshooting
URL:https://www.kendallelectric.com/event/intro-to-logix-troubleshooting-15/
LOCATION:Kendall Electric – Holland\, 11581 Green Way Drive\, Holland\, MI\, 49424\, United States
CATEGORIES:Great Lakes North,Kendall Connected Training
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2024/08/Workstation_Micro820-PLC-scaled.jpg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:42.8081538;-86.0677026
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Holland 11581 Green Way Drive Holland MI 49424 United States;X-APPLE-RADIUS=500;X-TITLE=11581 Green Way Drive:geo:-86.0677026,42.8081538
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260323T090000
DTEND;TZID=America/New_York:20260323T163000
DTSTAMP:20260107T184142Z
CREATED:20250911T170236Z
LAST-MODIFIED:20260107T184142Z
UID:10006990-1774256400-1774283400@www.kendallelectric.com
SUMMARY:Intro to Logix
DESCRIPTION:Get hands-on with Logix in these 1-day instructor-led training sessions.\n\nFlexible – only choose the days you want\nScalable – classes cover various skill levels\nIndividual – students will be provided with individual lab stations\n\nSessions Available: \n\nIntro to Logix\nIntermediate Logix\nAdvanced Logix\nLogix PID\nLogix Troubleshooting
URL:https://www.kendallelectric.com/event/intro-to-logix-22/
LOCATION:Kendall Electric – Holland\, 11581 Green Way Drive\, Holland\, MI\, 49424\, United States
CATEGORIES:Great Lakes North,Kendall Connected Training
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2024/08/Workstation_Micro820-PLC-scaled.jpg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:42.8081538;-86.0677026
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Holland 11581 Green Way Drive Holland MI 49424 United States;X-APPLE-RADIUS=500;X-TITLE=11581 Green Way Drive:geo:-86.0677026,42.8081538
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260129T130000
DTEND;TZID=America/New_York:20260129T160000
DTSTAMP:20251219T203351Z
CREATED:20251217T200122Z
LAST-MODIFIED:20251219T203351Z
UID:10007023-1769691600-1769702400@www.kendallelectric.com
SUMMARY:IO-Link and GuardLink Technology - Session 2
DESCRIPTION:Implement IO-Link and GuardLink Into Your Machines\nDiscover the advantages of smart industrial components using IO-Link and GuardLink technologies. You will learn to leverage enhanced data from your I/O as well as work with GuardLink enabled devices that enhance safety and increase machine- and plant-wide efficiency. \nSession Topics\nIO-Link \n\nFundamentals of IO-Link applications\, designs\, and programming\nInstallation\, setup\, and deployment of PLC program with ArmorBlock 5000\nHands-on lab with the latest in IO-Link smart components\n\nGuardLink \n\nMachine safety wiring while delivering rich diagnostics and improved uptime\nCIP safety program integration into Compact GuardLogix PLC\nHands-on lab with M12 cable based architecture
URL:https://www.kendallelectric.com/event/io-link-and-guardlink-technology-11/
LOCATION:Kendall Electric – Holland\, 11581 Green Way Drive\, Holland\, MI\, 49424\, United States
CATEGORIES:Great Lakes North,Kendall Technology Update
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2025/12/IO-Link-web-image-1.jpg
ORGANIZER;CN="Scott Stewart":MAILTO:scott.stewart@kendallelectric.com
GEO:42.8081538;-86.0677026
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Holland 11581 Green Way Drive Holland MI 49424 United States;X-APPLE-RADIUS=500;X-TITLE=11581 Green Way Drive:geo:-86.0677026,42.8081538
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260129T090000
DTEND;TZID=America/New_York:20260129T120000
DTSTAMP:20251219T203300Z
CREATED:20251217T200144Z
LAST-MODIFIED:20251219T203300Z
UID:10007024-1769677200-1769688000@www.kendallelectric.com
SUMMARY:IO-Link and GuardLink Technology - Session 1
DESCRIPTION:Implement IO-Link and GuardLink Into Your Machines\nDiscover the advantages of smart industrial components using IO-Link and GuardLink technologies. You will learn to leverage enhanced data from your I/O as well as work with GuardLink enabled devices that enhance safety and increase machine- and plant-wide efficiency. \nSession Topics\nIO-Link \n\nFundamentals of IO-Link applications\, designs\, and programming\nInstallation\, setup\, and deployment of PLC program with ArmorBlock 5000\nHands-on lab with the latest in IO-Link smart components\n\nGuardLink \n\nMachine safety wiring while delivering rich diagnostics and improved uptime\nCIP safety program integration into Compact GuardLogix PLC\nHands-on lab with M12 cable based architecture
URL:https://www.kendallelectric.com/event/io-link-and-guardlink-technology-12/
LOCATION:Kendall Electric – Holland\, 11581 Green Way Drive\, Holland\, MI\, 49424\, United States
CATEGORIES:Great Lakes North,Kendall Technology Update
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2025/12/IO-Link-web-image-1.jpg
ORGANIZER;CN="Scott Stewart":MAILTO:scott.stewart@kendallelectric.com
GEO:42.8081538;-86.0677026
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Holland 11581 Green Way Drive Holland MI 49424 United States;X-APPLE-RADIUS=500;X-TITLE=11581 Green Way Drive:geo:-86.0677026,42.8081538
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260113T083000
DTEND;TZID=America/New_York:20260116T163000
DTSTAMP:20260102T165644Z
CREATED:20250715T190735Z
LAST-MODIFIED:20260102T165644Z
UID:10006431-1768293000-1768581000@www.kendallelectric.com
SUMMARY:Studio 5000 Designer Level 3: Project Development
DESCRIPTION:CCP143 presented by Rockwell Automation. \nUpon completion of this course\, given a functional specification for a Logix5000™ application\, you should be able to develop a project to meet the specification requirements. \nThis course covers tasks common to the following hardware\, which all use the Logix5000 control engine: \n\nControlLogix® controllers\nCompactLogix™ controllers\nSoftLogix™ controllers\n\nThis course builds upon your knowledge of common controller terms and operation and your experience with basic ladder logic programming. You can gain a deeper understanding of project development tasks that are common to all Logix5000 controllers. Such tasks include organizing tasks and routines\, organizing controller data\, configuring modules\, and sharing data. You will also use producer/consumer technology for multicasting to input and output devices\, sharing data between controllers\, and controlling remote I/O.
URL:https://www.kendallelectric.com/event/studio-5000-designer-level-3-project-development/
LOCATION:Kendall Electric – Holland\, 11581 Green Way Drive\, Holland\, MI\, 49424\, United States
CATEGORIES:Great Lakes North,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Software.jpg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:42.8081538;-86.0677026
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Holland 11581 Green Way Drive Holland MI 49424 United States;X-APPLE-RADIUS=500;X-TITLE=11581 Green Way Drive:geo:-86.0677026,42.8081538
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20251209T083000
DTEND;TZID=America/New_York:20251211T163000
DTSTAMP:20260102T165723Z
CREATED:20250715T185729Z
LAST-MODIFIED:20260102T165723Z
UID:10006426-1765269000-1765470600@www.kendallelectric.com
SUMMARY:Motion Control Fundamentals using Kinetix 5700 (CIP) Servo Drives
DESCRIPTION:CCN132 presented by Rockwell Automation. \nUpon completion of this course\, you should be able to demonstrate fundamental motion control concepts common to all Rockwell Automation motion control systems. \nThis course is designed to provide you with an understanding of the concepts\, terminology\, functionality and applications of motion control. This course will also allow you to establish the foundation you need before learning the skills necessary to maintain and program motion control systems. \nThis course does not address motion control system design or specific motion control software programming. If you are seeking training in these areas\, you should enroll in the relevant Rockwell Automation training\ncourses\, making sure you have fulfilled the prerequisites for those courses prior to enrollment.
URL:https://www.kendallelectric.com/event/motion-control-fundamentals-using-kinetix-5700-cip-servo-drives-7/
LOCATION:Kendall Electric – Holland\, 11581 Green Way Drive\, Holland\, MI\, 49424\, United States
CATEGORIES:Great Lakes North,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Motion-Control.jpg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:42.8081538;-86.0677026
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Holland 11581 Green Way Drive Holland MI 49424 United States;X-APPLE-RADIUS=500;X-TITLE=11581 Green Way Drive:geo:-86.0677026,42.8081538
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20251204T083000
DTEND;TZID=America/New_York:20251205T163000
DTSTAMP:20260102T170645Z
CREATED:20250701T171744Z
LAST-MODIFIED:20260102T170645Z
UID:10006919-1764837000-1764952200@www.kendallelectric.com
SUMMARY:Studio 5000 Logix Designer Level 2: Basic Ladder Logic Programming
DESCRIPTION:CCP151 presented by Rockwell Automation. \nAfter completing this course\, you should be able to program basic ladder logic instructions for Logix5000™ controllers. \nThis is a skill-building course that provides you with the resources and hands-on practice required to complete this objective. You will have an opportunity to use the Studio 5000 Logix Designer® application to perform basic software tasks to meet the requirements of a given functional specification. \nIn addition\, you will set up a sequencer to run equipment through a predefined procedure and separate production procedure from equipment control.
URL:https://www.kendallelectric.com/event/studio-5000-logix-designer-level-2-basic-ladder-logic-programming-42/
LOCATION:Kendall Electric – Holland\, 11581 Green Way Drive\, Holland\, MI\, 49424\, United States
CATEGORIES:Great Lakes North,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Software.jpg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:42.8081538;-86.0677026
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Holland 11581 Green Way Drive Holland MI 49424 United States;X-APPLE-RADIUS=500;X-TITLE=11581 Green Way Drive:geo:-86.0677026,42.8081538
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20251202T083000
DTEND;TZID=America/New_York:20251203T163000
DTSTAMP:20260102T170659Z
CREATED:20250701T171743Z
LAST-MODIFIED:20260102T170659Z
UID:10006918-1764664200-1764779400@www.kendallelectric.com
SUMMARY:Studio 5000 Logix Designer Level 1: ControlLogix System Fundamentals
DESCRIPTION:CCP146 presented by Rockwell Automation. \nAfter completing this course\, you should be able to perform basic ControlLogix® and Studio 5000 Logix Designer® tasks\, such as: \n\nCreating and configuring a project\nCommunicating with a controller.\n\nThe course will assist you in developing and building a solid foundation with a fundamental knowledge of ControlLogix and other Logix5000™ systems. \nYou will be introduced to basic Logix5000 concepts and terminology\, and you will be exposed to Logix5000 system hardware\, including hands-on experience with the ControlLogix platform.
URL:https://www.kendallelectric.com/event/studio-5000-logix-designer-level-1-controllogix-system-fundamentals-40/
LOCATION:Kendall Electric – Holland\, 11581 Green Way Drive\, Holland\, MI\, 49424\, United States
CATEGORIES:Great Lakes North,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Software.jpg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:42.8081538;-86.0677026
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Holland 11581 Green Way Drive Holland MI 49424 United States;X-APPLE-RADIUS=500;X-TITLE=11581 Green Way Drive:geo:-86.0677026,42.8081538
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20251119T060000
DTEND;TZID=America/New_York:20251120T153000
DTSTAMP:20251117T192742Z
CREATED:20250731T041942Z
LAST-MODIFIED:20251117T192742Z
UID:10006960-1763532000-1763652600@www.kendallelectric.com
SUMMARY:Overnight Shuttle: Grand Rapids to Holland to Automation Fair
DESCRIPTION:Automation Fair 2025\nKendall Electric is pleased to offer complimentary round-trip transportation for customers attending Automation Fair. Please reserve your seat by completing the registration process below. Details of the shuttle departure and return times are listed below. \nNote: All times mentioned below are in local time. Be sure to plan accordingly when reviewing your travel and event schedule. \nStarting Point Pick Up:\nDate: Wednesday\, November 19\, 2025\nTime: 6:00 AM EST\nAddress: Kendall Electric\,\n4525 44th St SE\, Grand Rapids\, MI \nAdditional Pick-Up Location:  \nDate: Wednesday\, November 19\, 2025\nTime: 7:00 AM EST\nAddress: Kendall Electric\n11581 Greenway Dr.\, Holland MI 49424 \nArrival Time at McCormick Place: 8:30 AM CST \nReturn Date: \nDate: Thursday\, November 20\, 2025\nMcCormick Place Pick Up: 3:30 PM* CST \nReturning via Holland and Grand Rapids.\n*IMPORTANT: Please arrive 15 minutes prior to your scheduled pick up time. 
URL:https://www.kendallelectric.com/event/overnight-shuttle-grand-rapids-holland-automation-fair/
LOCATION:Kendall Electric – Holland\, 11581 Green Way Drive\, Holland\, MI\, 49424\, United States
CATEGORIES:Automation Fair,Great Lakes North
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2025/07/Automation-Fair-2025-5-Registration-Bus-.jpeg
ORGANIZER;CN="Chad Beaver":MAILTO:Chad.Beaver@kendallelectric.com
GEO:42.8081538;-86.0677026
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Holland 11581 Green Way Drive Holland MI 49424 United States;X-APPLE-RADIUS=500;X-TITLE=11581 Green Way Drive:geo:-86.0677026,42.8081538
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20251118T060000
DTEND;TZID=America/New_York:20251118T170000
DTSTAMP:20251117T192804Z
CREATED:20250731T041436Z
LAST-MODIFIED:20251117T192804Z
UID:10006961-1763445600-1763485200@www.kendallelectric.com
SUMMARY:Day Shuttle: Grand Rapids to Holland to Automation Fair
DESCRIPTION:Automation Fair 2025\nKendall Electric is pleased to offer complimentary round-trip transportation for customers attending Automation Fair. Please reserve your seat by completing the registration process below. Details of the shuttle departure and return times are listed below. \nNote: All times mentioned below are in local time. Be sure to plan accordingly when reviewing your travel and event schedule. \nStarting Point Pick Up:\nDate: Tuesday\, November 18\, 2025\nTime: 6:00 AM ET\nAddress: Kendall Electric\n44th St SE\, Grand Rapids MI 49512 \nAdditional Pick-Up Location:  \nDate: Tuesday\, November 18\, 2025\nTime: 7:00 AM ET\nAddress: Kendall Electric\n11581 Greenway Dr.\, Holland MI 49424 \nArrival Time at McCormick Place: 8:30 AM CT \nReturn Date: \nDate: Tuesday\, November 18\, 2025\nMcCormick Place Pick Up: 5:00 PM* CT \nReturning via Holland and Grand Rapids. \n*IMPORTANT: Please arrive 15 minutes prior to your scheduled pick up time. 
URL:https://www.kendallelectric.com/event/day-shuttle-grand-rapids-holland-automation-fair/
LOCATION:Kendall Electric – Holland\, 11581 Green Way Drive\, Holland\, MI\, 49424\, United States
CATEGORIES:Automation Fair,Great Lakes North
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2025/07/Automation-Fair-2025-5-Registration-Bus-.jpeg
ORGANIZER;CN="Chad Beaver":MAILTO:Chad.Beaver@kendallelectric.com
GEO:42.8081538;-86.0677026
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Holland 11581 Green Way Drive Holland MI 49424 United States;X-APPLE-RADIUS=500;X-TITLE=11581 Green Way Drive:geo:-86.0677026,42.8081538
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250724T130000
DTEND;TZID=America/New_York:20250724T160000
DTSTAMP:20250701T132023Z
CREATED:20250522T183647Z
LAST-MODIFIED:20250701T132023Z
UID:10006384-1753362000-1753372800@www.kendallelectric.com
SUMMARY:PowerFlex 755TS Workshop - PM Session
DESCRIPTION:Introducing a hands-on technical training on the newest PowerFlex Drive\, the PowerFlex 755TS.\nLearn how this variable frequency drive has a streamlined programming structure that utilizes the upgraded control on these TotalFORCE drives. The PowerFlex 755TS brings the power of the TotalFORCE drives into a standard\, six pulse drive. Attending this workshop will introduce you to programming these drives as well as highlighting some of the changes between previous PowerFlex drives. \nTopics: \n\nSimilarities and differences between PowerFlex 750 and PowerFlex 755TS\nProgramming and functionality with the PowerFlex 755TS\nApplication scenarios taken from applications found in the field\nTotalFORCE Technology and a comparison of the 755TS vs. the PowerFlex 755 classic\n2.5 hour hands-on lab using Connected Components Workbench to program 755TS drives
URL:https://www.kendallelectric.com/event/powerflex-755ts-workshop-pm-session-2/
LOCATION:Kendall Electric – Holland\, 11581 Green Way Drive\, Holland\, MI\, 49424\, United States
CATEGORIES:Great Lakes North,Kendall Technology Update
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2025/05/shutterstock_1335730826-featured-image.jpg
ORGANIZER;CN="Steve Orloff":MAILTO:steven.orloff@kendallelectric.com
GEO:42.8081538;-86.0677026
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Holland 11581 Green Way Drive Holland MI 49424 United States;X-APPLE-RADIUS=500;X-TITLE=11581 Green Way Drive:geo:-86.0677026,42.8081538
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250724T090000
DTEND;TZID=America/New_York:20250724T120000
DTSTAMP:20250701T132109Z
CREATED:20250522T183334Z
LAST-MODIFIED:20250701T132109Z
UID:10006382-1753347600-1753358400@www.kendallelectric.com
SUMMARY:PowerFlex 755TS Workshop - AM Session
DESCRIPTION:Introducing a hands-on technical training on the newest PowerFlex Drive\, the PowerFlex 755TS.\nLearn how this variable frequency drive has a streamlined programming structure that utilizes the upgraded control on these TotalFORCE drives. The PowerFlex 755TS brings the power of the TotalFORCE drives into a standard\, six pulse drive. Attending this workshop will introduce you to programming these drives as well as highlighting some of the changes between previous PowerFlex drives. \nTopics: \n\nSimilarities and differences between PowerFlex 750 and PowerFlex 755TS\nProgramming and functionality with the PowerFlex 755TS\nApplication scenarios taken from applications found in the field\nTotalFORCE Technology and a comparison of the 755TS vs. the PowerFlex 755 classic\n2.5 hour hands-on lab using Connected Components Workbench to program 755TS drives
URL:https://www.kendallelectric.com/event/powerflex-75ts-workshop-am-session/
LOCATION:Kendall Electric – Holland\, 11581 Green Way Drive\, Holland\, MI\, 49424\, United States
CATEGORIES:Great Lakes North,Kendall Technology Update
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2025/05/shutterstock_1335730826-featured-image.jpg
ORGANIZER;CN="Steve Orloff":MAILTO:steven.orloff@kendallelectric.com
GEO:42.8081538;-86.0677026
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Holland 11581 Green Way Drive Holland MI 49424 United States;X-APPLE-RADIUS=500;X-TITLE=11581 Green Way Drive:geo:-86.0677026,42.8081538
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250603T083000
DTEND;TZID=America/New_York:20250605T163000
DTSTAMP:20250313T165827Z
CREATED:20241220T210444Z
LAST-MODIFIED:20250313T165827Z
UID:10006251-1748939400-1749141000@www.kendallelectric.com
SUMMARY:GuardLogix Application Development and Troubleshooting
DESCRIPTION:SAF-LOG104 presented by Rockwell Automation.\nUpon completion of this course\, you will be able to create a Studio 5000 Logix Designer® project for a GuardLogix® system and troubleshoot a previously operational GuardLogix system. You will have the opportunity to develop and practice these skills by: \n\nLearning GuardLogix concepts and terminology\nCreating and configuring a GuardLogix project:\n\nAdding and configuring CompactBlock™ Guard I/O™\n\n\nPOINT Guard I/O™ safety modules:\n\nGenerating Safety Signatures and locking/unlocking a GuardLogix controller\nProgramming safety instructions\nTroubleshooting a GuardLogix project
URL:https://www.kendallelectric.com/event/guardlogix-application-development-and-troubleshooting-14/
LOCATION:Kendall Electric – Holland\, 11581 Green Way Drive\, Holland\, MI\, 49424\, United States
CATEGORIES:Great Lakes North,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Safety.jpg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:42.8081538;-86.0677026
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Holland 11581 Green Way Drive Holland MI 49424 United States;X-APPLE-RADIUS=500;X-TITLE=11581 Green Way Drive:geo:-86.0677026,42.8081538
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250109T120000
DTEND;TZID=America/New_York:20250109T160000
DTSTAMP:20241008T130355Z
CREATED:20241008T033440Z
LAST-MODIFIED:20241008T130355Z
UID:10006235-1736424000-1736438400@www.kendallelectric.com
SUMMARY:Micro800 E Series Controller Workshop
DESCRIPTION:Streamline your control system design\, startup\, and operation with the Micro800 E controller. Learn to integrate Ethernet devices like PowerFlex 525 and Kinetix 5100\, and get a better understanding of Connected Components Workshop (CCW) and PanelView 800 programming. \nTopics covered: \n\nConfiguration of devices in CCW\nBasic control of data within CCW\nIntroduction to Panelview800 Programing\n\nLunch will be available beginning at 12:00 noon. \nCan’t make it for the afternoon session? We’re also hosting a morning session of this seminar. Save your spot here: Micro 800 Controller Workshop
URL:https://www.kendallelectric.com/event/micro-800-e-series-controller-workshop-14/
LOCATION:Kendall Electric – Holland\, 11581 Green Way Drive\, Holland\, MI\, 49424\, United States
CATEGORIES:Great Lakes North,Kendall Technology Update
ATTACH;FMTTYPE=image/png:https://www.kendallelectric.com/wp-content/uploads/2024/09/Artboard-1.png
ORGANIZER;CN="Justin Benner":MAILTO:justin.benner@kendallelectric.com
GEO:42.8081538;-86.0677026
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Holland 11581 Green Way Drive Holland MI 49424 United States;X-APPLE-RADIUS=500;X-TITLE=11581 Green Way Drive:geo:-86.0677026,42.8081538
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250109T073000
DTEND;TZID=America/New_York:20250109T113000
DTSTAMP:20241008T130417Z
CREATED:20241008T033033Z
LAST-MODIFIED:20241008T130417Z
UID:10006234-1736407800-1736422200@www.kendallelectric.com
SUMMARY:Micro800 E Series Controller Workshop
DESCRIPTION:Streamline your control system design\, startup\, and operation with the Micro800 E controller. Learn to integrate Ethernet devices like PowerFlex 525 and Kinetix 5100\, and get a better understanding of Connected Components Workshop (CCW) and PanelView 800 programming. \nTopics covered: \n\nConfiguration of devices in CCW\nBasic control of data within CCW\nIntroduction to Panelview800 Programing\n\nBreakfast will be available beginning at 7:30 am. \nCan’t make it for the morning session? We’re also hosting an afternoon session of this seminar. Save your spot here: Micro 800 Controller Workshop
URL:https://www.kendallelectric.com/event/micro-800-e-series-controller-workshop-13/
LOCATION:Kendall Electric – Holland\, 11581 Green Way Drive\, Holland\, MI\, 49424\, United States
CATEGORIES:Great Lakes North,Kendall Technology Update
ATTACH;FMTTYPE=image/png:https://www.kendallelectric.com/wp-content/uploads/2024/09/Artboard-1.png
ORGANIZER;CN="Justin Benner":MAILTO:justin.benner@kendallelectric.com
GEO:42.8081538;-86.0677026
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Holland 11581 Green Way Drive Holland MI 49424 United States;X-APPLE-RADIUS=500;X-TITLE=11581 Green Way Drive:geo:-86.0677026,42.8081538
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20241205T083000
DTEND;TZID=America/New_York:20241206T163000
DTSTAMP:20240719T191813Z
CREATED:20240628T162238Z
LAST-MODIFIED:20240719T191813Z
UID:10006526-1733387400-1733502600@www.kendallelectric.com
SUMMARY:Studio 5000 Logix Designer Level 2: Basic Ladder Logic Programming
DESCRIPTION:CCP151 presented by Rockwell Automation. After completing this course\, you should be able to program basic ladder logic instructions for Logix5000™ controllers. This is a skill-building course that provides you with the resources and hands-on practice required to complete this objective. You will have an opportunity to use the Studio 5000 Logix Designer® application to perform basic software tasks to meet the requirements of a given functional specification. In addition\, you will set up a sequencer to run equipment through a predefined procedure and separate production procedure from equipment control.
URL:https://www.kendallelectric.com/event/studio-5000-logix-designer-level-2-basic-ladder-logic-programming-22/
LOCATION:Kendall Electric – Holland\, 11581 Green Way Drive\, Holland\, MI\, 49424\, United States
CATEGORIES:Great Lakes North,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Software.jpg
ORGANIZER;CN="Camie White":MAILTO:camie.white@kendallelectric.com
GEO:42.8081538;-86.0677026
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Holland 11581 Green Way Drive Holland MI 49424 United States;X-APPLE-RADIUS=500;X-TITLE=11581 Green Way Drive:geo:-86.0677026,42.8081538
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20241203T083000
DTEND;TZID=America/New_York:20241204T163000
DTSTAMP:20240719T191748Z
CREATED:20240628T162128Z
LAST-MODIFIED:20240719T191748Z
UID:10006525-1733214600-1733329800@www.kendallelectric.com
SUMMARY:Studio 5000 Logix Designer Level 1: ControlLogix System Fundamentals
DESCRIPTION:CCP146 presented by Rockwell Automation. After completing this course\, you should be able to perform basic ControlLogix® and Studio 5000 Logix Designer® tasks\, such as:\n• Creating and configuring a project\n• Communicating with a controller. \nThe course will assist you in developing and building a solid foundation with a fundamental knowledge of ControlLogix and other Logix5000™ systems. You will be introduced to basic Logix5000 concepts and terminology\, and you will be exposed to Logix5000 system hardware\, including hands-on experience with the ControlLogix platform.
URL:https://www.kendallelectric.com/event/studio-5000-logix-designer-level-1-controllogix-system-fundamentals-22/
LOCATION:Kendall Electric – Holland\, 11581 Green Way Drive\, Holland\, MI\, 49424\, United States
CATEGORIES:Great Lakes North,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Software.jpg
ORGANIZER;CN="Camie White":MAILTO:camie.white@kendallelectric.com
GEO:42.8081538;-86.0677026
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Holland 11581 Green Way Drive Holland MI 49424 United States;X-APPLE-RADIUS=500;X-TITLE=11581 Green Way Drive:geo:-86.0677026,42.8081538
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20241120T080000
DTEND;TZID=America/New_York:20241120T133000
DTSTAMP:20240923T141040Z
CREATED:20240827T154654Z
LAST-MODIFIED:20240923T141040Z
UID:10006657-1732089600-1732109400@www.kendallelectric.com
SUMMARY:Shift into Stratix 5200
DESCRIPTION:Learn about the latest managed switches in Rockwell Automation’s portfolio. \nJoin this half-day training session for a comprehensive exploration of industrial networking. Gain essential skills such as Ethernet/IP fundamentals\, and introductions to VLAN setups and firmware updating. Experience hands-on learning with Stratix 5200 switches and take your networking expertise to the next level. Each student will take home their own switch at the end of the class. \nSESSION TOPICS:  \n\nSwitch portfolio review\nUpdates from the 5700 series switch\nExpress setup VLAN setups and strategies\nSmart port setup\nDHCP pools and persistence\nSD Card backups\nUsing a Rockwell centric Cisco IOS\nFirmware updates
URL:https://www.kendallelectric.com/event/shift-into-stratix-5200-13/
LOCATION:Kendall Electric – Holland\, 11581 Green Way Drive\, Holland\, MI\, 49424\, United States
CATEGORIES:Great Lakes North,Kendall Technology Update
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Networking.jpg
ORGANIZER;CN="Camie White":MAILTO:camie.white@kendallelectric.com
GEO:42.8081538;-86.0677026
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Holland 11581 Green Way Drive Holland MI 49424 United States;X-APPLE-RADIUS=500;X-TITLE=11581 Green Way Drive:geo:-86.0677026,42.8081538
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20241106T090000
DTEND;TZID=America/New_York:20241108T163000
DTSTAMP:20240917T192558Z
CREATED:20240819T130924Z
LAST-MODIFIED:20240917T192558Z
UID:10006612-1730883600-1731083400@www.kendallelectric.com
SUMMARY:Fundamentals of PowerFlex 525 VFD Wiring and Commissioning
DESCRIPTION:Learn how to install\, test\, start-up\, and troubleshoot basic PowerFlex 525 VFD applications.  \nLearn how to wire\, program\, and operate Variable Frequency Drives during this three-day course that covers a combination of instructor-led discussions\, demonstrations\, and hands-on labs. \nUsing a VFD workstation\, HMI module and hand-held VFD test module\, students will leave with a better understanding of various control configurations and applications. Students will also test and troubleshoot VFDs using Fluke test and measurement equipment. \nSESSION TOPICS \n\nVFD Power and Control Fundamentals\nTesting VFD Power Components\nAC Motor Fundamentals and Measurements\nInstallation Considerations\nPower and Control Wiring Configurations\nVFD Application Techniques and Parameter Adjustments\nEthernet Communications Configuration\nVoltage and Current Measurements using Fluke VOM® and Clamp Ammeter
URL:https://www.kendallelectric.com/event/fundamentals-of-powerflex-525-vfd-wiring-and-commissioning-5/
LOCATION:Kendall Electric – Holland\, 11581 Green Way Drive\, Holland\, MI\, 49424\, United States
CATEGORIES:Great Lakes North,Kendall Connected Training
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_KCT_Powerflex525.jpg
ORGANIZER;CN="Camie White":MAILTO:camie.white@kendallelectric.com
GEO:42.8081538;-86.0677026
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Holland 11581 Green Way Drive Holland MI 49424 United States;X-APPLE-RADIUS=500;X-TITLE=11581 Green Way Drive:geo:-86.0677026,42.8081538
END:VEVENT
END:VCALENDAR