BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//Kendall Electric - ECPv6.17.1//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-WR-CALNAME:Kendall Electric
X-ORIGINAL-URL:https://www.kendallelectric.com
X-WR-CALDESC:Events for Kendall Electric
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:America/New_York
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20220313T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20221106T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20230312T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20231105T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20240310T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20241103T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20250309T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20251102T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20260308T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20261101T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20270314T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20271107T060000
END:STANDARD
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:UTC
BEGIN:STANDARD
TZOFFSETFROM:+0000
TZOFFSETTO:+0000
TZNAME:UTC
DTSTART:20220101T000000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260729T090000
DTEND;TZID=America/New_York:20260729T143000
DTSTAMP:20260409T191535Z
CREATED:20260409T191535Z
LAST-MODIFIED:20260409T191535Z
UID:10007185-1785315600-1785335400@www.kendallelectric.com
SUMMARY:Advanced Shift into Stratix
DESCRIPTION:Go beyond basic configuration with this advanced fundamentals\, hands-on lab and capstone experience. Learn to build and validate a resilient industrial network that improves uptime\, increases throughput without new hardware\, and reduces security risk by addressing key Stratix® 5200 behavior changes versus legacy platforms.
URL:https://www.kendallelectric.com/event/advanced-shift-into-stratix-8/
LOCATION:Kendall Electric – Bethlehem\, 2459 Baglyos Circle\, Bethlehem\, PA\, 18020\, United States
CATEGORIES:Kendall Technology Update,Mid-Atlantic
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_KCT_Stratix2.jpg
ORGANIZER;CN="Larry Murray":MAILTO:larry.murray@kendallelectric.com
GEO:40.6585138;-75.2954086
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Bethlehem 2459 Baglyos Circle Bethlehem PA 18020 United States;X-APPLE-RADIUS=500;X-TITLE=2459 Baglyos Circle:geo:-75.2954086,40.6585138
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260504T130000
DTEND;TZID=America/New_York:20260508T163000
DTSTAMP:20260407T130321Z
CREATED:20260227T194056Z
LAST-MODIFIED:20260407T130321Z
UID:10006623-1777899600-1778257800@www.kendallelectric.com
SUMMARY:Studio 5000 Logix Designer Level 1: CompactLogix Fundamentals and Troubleshooting
DESCRIPTION:CCP298 presented by Rockwell Automation. \nUpon completion of this course\, you should be able to troubleshoot a previously operational CompactLogix™ system and restore normal operation. \nIn this course you will develop and practice these skills by: \n\nLearning basic concepts and terminology used with:\n\nCompactLogix system hardware\nStudio 5000 Logix Designer® application\n\n\nPracticing a systematic strategy for diagnosing and troubleshooting problems:\n\nFaulty/malfunctioning field devices\nController\, I/O\, or other hardware issues\nElectrical Noise\nConfiguration issues\n\n\nPerforming hands-on exercises\n\nAll Logix5000™ systems use the same control engine; therefore\, tasks are similar. You will see applicable references for other systems. \nMonday start time 1:00pm. Monday Only.
URL:https://www.kendallelectric.com/event/studio-5000-logix-designer-level-1-compactlogix-fundamentals-and-troubleshooting-7/
LOCATION:Kendall Electric – Bethlehem\, 2459 Baglyos Circle\, Bethlehem\, PA\, 18020\, United States
CATEGORIES:Mid-Atlantic,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Software.jpg
ORGANIZER;CN="Barbara Dever":MAILTO:barbara.dever@kendallelectric.com
GEO:40.6585138;-75.2954086
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Bethlehem 2459 Baglyos Circle Bethlehem PA 18020 United States;X-APPLE-RADIUS=500;X-TITLE=2459 Baglyos Circle:geo:-75.2954086,40.6585138
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260223T083000
DTEND;TZID=America/New_York:20260227T163000
DTSTAMP:20260102T170550Z
CREATED:20250701T171750Z
LAST-MODIFIED:20260102T170550Z
UID:10006924-1771835400-1772209800@www.kendallelectric.com
SUMMARY:Studio 5000 Logix Designer Level 1: CompactLogix Fundamentals and Troubleshooting
DESCRIPTION:CCP298 presented by Rockwell Automation. \nUpon completion of this course\, you should be able to troubleshoot a previously operational CompactLogix™ system and restore normal operation. \nIn this course you will develop and practice these skills by: \n\nLearning basic concepts and terminology used with:\n\nCompactLogix system hardware\nStudio 5000 Logix Designer® application\n\n\nPracticing a systematic strategy for diagnosing and troubleshooting problems:\n\nFaulty/malfunctioning field devices\nController\, I/O\, or other hardware issues\nElectrical Noise\nConfiguration issues\n\n\nPerforming hands-on exercises\n\nAll Logix5000™ systems use the same control engine; therefore\, tasks are similar. You will see applicable references for other systems. \nMonday start time 1:00pm. Monday Only.
URL:https://www.kendallelectric.com/event/studio-5000-logix-designer-level-1-compactlogix-fundamentals-and-troubleshooting-6/
LOCATION:Kendall Electric – Bethlehem\, 2459 Baglyos Circle\, Bethlehem\, PA\, 18020\, United States
CATEGORIES:Mid-Atlantic,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Software.jpg
ORGANIZER;CN="Barbara Dever":MAILTO:barbara.dever@kendallelectric.com
GEO:40.6585138;-75.2954086
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Bethlehem 2459 Baglyos Circle Bethlehem PA 18020 United States;X-APPLE-RADIUS=500;X-TITLE=2459 Baglyos Circle:geo:-75.2954086,40.6585138
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260128T090000
DTEND;TZID=America/New_York:20260128T150000
DTSTAMP:20260126T195306Z
CREATED:20251202T141641Z
LAST-MODIFIED:20260126T195306Z
UID:10006496-1769590800-1769612400@www.kendallelectric.com
SUMMARY:Introduction to FactoryTalk Optix
DESCRIPTION:Discover a new approach to data collection and visualization at Kendall Electric’s FactoryTalk Optix workshop.\nThis one-day\, hands-on workshop will help you create your first project and use capabilities like reusable code libraries\, pre-built recipes\, localization\, datalogging\, style sheets\, multi-user collaboration\, web-based design and test\, integrated version control\, and more. \nLearn how you can leverage modern technologies through innovative design software and scalable deployment options\, including a variety of hardware options and a modular licensing model – so you only pay for the features you need. \nSession Topics\n• Overview of FactoryTalk Optix\n• Hands-On Lab and Demonstrations\n• HMI Panel Solutions\n• FactoryTalk Hub Design Software\n• FactoryTalk Optix Pro SaaS-Enabled Workflows\n• FactoryTalk Remote Access Software Solution \nSpecial Offer for Workshop Attendees\nWorkshop attendees will be eligible for special pricing on the purchase of a FactoryTalk Optix panel. Reach out to your Kendall Electric Account Manager to take advantage of this limited time offer. Valid until 30 days from class date.
URL:https://www.kendallelectric.com/event/introduction-to-factorytalk-optix-2/
LOCATION:Kendall Electric – Bethlehem\, 2459 Baglyos Circle\, Bethlehem\, PA\, 18020\, United States
CATEGORIES:Kendall Technology Update,Mid-Atlantic
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/08/Training-Tech-Updates.jpg
ORGANIZER;CN="Steve Wehr":MAILTO:steve.wehr@kendallelectric.com
GEO:40.6585138;-75.2954086
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Bethlehem 2459 Baglyos Circle Bethlehem PA 18020 United States;X-APPLE-RADIUS=500;X-TITLE=2459 Baglyos Circle:geo:-75.2954086,40.6585138
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20251204T083000
DTEND;TZID=UTC:20251205T163000
DTSTAMP:20260102T165126Z
CREATED:20250722T184726Z
LAST-MODIFIED:20260102T165126Z
UID:10006959-1764837000-1764952200@www.kendallelectric.com
SUMMARY:Studio 5000 Logix Designer Level 2: Basic Ladder Logic Programming
DESCRIPTION:CCP151 presented by Rockwell Automation. \nAfter completing this course\, you should be able to program basic ladder logic instructions for Logix5000™ controllers. \nThis is a skill-building course that provides you with the resources and hands-on practice required to complete this objective. You will have an opportunity to use the Studio 5000 Logix Designer® application to perform basic software tasks to meet the requirements of a given functional specification. \nIn addition\, you will set up a sequencer to run equipment through a predefined procedure and separate production procedure from equipment control.
URL:https://www.kendallelectric.com/event/studio-5000-logix-designer-level-2-basic-ladder-logic-programming-50/
LOCATION:Kendall Electric – Bethlehem\, 2459 Baglyos Circle\, Bethlehem\, PA\, 18020\, United States
CATEGORIES:Mid-Atlantic,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2024/08/Workstation_Micro820-PLC-scaled.jpg
ORGANIZER;CN="Barbara Dever":MAILTO:barbara.dever@kendallelectric.com
GEO:40.6585138;-75.2954086
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Bethlehem 2459 Baglyos Circle Bethlehem PA 18020 United States;X-APPLE-RADIUS=500;X-TITLE=2459 Baglyos Circle:geo:-75.2954086,40.6585138
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20251202T083000
DTEND;TZID=UTC:20251203T163000
DTSTAMP:20260102T165159Z
CREATED:20250722T184158Z
LAST-MODIFIED:20260102T165159Z
UID:10006958-1764664200-1764779400@www.kendallelectric.com
SUMMARY:Studio 5000 Logix Designer Level 1: ControlLogix System Fundamentals
DESCRIPTION:CCP146 presented by Rockwell Automation. \nAfter completing this course\, you should be able to perform basic ControlLogix® and Studio 5000 Logix Designer® tasks\, such as: \n\nCreating and configuring a project\nCommunicating with a controller\n\nThe course will assist you in developing and building a solid foundation with a fundamental knowledge of ControlLogix and other Logix5000™ systems. You will be introduced to basic Logix5000 concepts and terminology\, and you will be exposed to Logix5000 system hardware\, including hands-on experience with the ControlLogix platform.
URL:https://www.kendallelectric.com/event/studio-5000-logix-designer-level-1-controllogix-system-fundamentals-48/
LOCATION:Kendall Electric – Bethlehem\, 2459 Baglyos Circle\, Bethlehem\, PA\, 18020\, United States
CATEGORIES:Mid-Atlantic,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2024/08/Workstation_Micro820-PLC-scaled.jpg
ORGANIZER;CN="Barbara Dever":MAILTO:barbara.dever@kendallelectric.com
GEO:40.6585138;-75.2954086
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Bethlehem 2459 Baglyos Circle Bethlehem PA 18020 United States;X-APPLE-RADIUS=500;X-TITLE=2459 Baglyos Circle:geo:-75.2954086,40.6585138
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250701T083000
DTEND;TZID=America/New_York:20250703T163000
DTSTAMP:20250624T165324Z
CREATED:20241230T165513Z
LAST-MODIFIED:20250624T165324Z
UID:10006793-1751358600-1751560200@www.kendallelectric.com
SUMMARY:Motion Control Fundamentals Using Kinetx 5700 (CIP) Servo Drives
DESCRIPTION:CCN132 presented by Rockwell Automation.\nUpon completion of this course\, you should be able to demonstrate fundamental motion control concepts common to all Rockwell Automation motion control systems. \nThis course is designed to provide you with an understanding of the concepts\, terminology\, functionality and applications of motion control. This course will also allow you to establish the foundation you need before learning the skills necessary to maintain and program motion control systems. \nThis course does not address motion control system design or specific motion control software programming. If you are seeking training in these areas\, you should enroll in the relevant Rockwell Automation training\ncourses\, making sure you have fulfilled the prerequisites for those courses prior to enrollment.
URL:https://www.kendallelectric.com/event/motion-control-fundamentals-using-kinetx-5700-cip-servo-drives/
LOCATION:Kendall Electric – Bethlehem\, 2459 Baglyos Circle\, Bethlehem\, PA\, 18020\, United States
CATEGORIES:Mid-Atlantic,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Motion-Control.jpg
ORGANIZER;CN="Barbara Dever":MAILTO:barbara.dever@kendallelectric.com
GEO:40.6585138;-75.2954086
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Bethlehem 2459 Baglyos Circle Bethlehem PA 18020 United States;X-APPLE-RADIUS=500;X-TITLE=2459 Baglyos Circle:geo:-75.2954086,40.6585138
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250520T090000
DTEND;TZID=America/New_York:20250520T130000
DTSTAMP:20250319T192536Z
CREATED:20250319T192536Z
LAST-MODIFIED:20250319T192536Z
UID:10006365-1747731600-1747746000@www.kendallelectric.com
SUMMARY:Machine Safety Seminar
DESCRIPTION:Can you show me why your equipment is safe today\, and why it will be safe tomorrow? \nIn today’s fast-changing industrial scene\, making sure machines are safe is a top priority. This seminar provides you with what you need to know and do to keep your machine designs safe and sound. \nSeminar Topics: \n• Safety Design Process (Standards\, PL / SIL)\n• Documentation of Machine Safety – IAB\, Wiring Diagrams\, Safety Functions\n• How Hardware Selection & Design Impacts Performance Level\n• SISTEMA\n• Smart Safety (GuardLink) – Simplified Wiring\, More Diagnostics\n• Next Level Integration (CIP) Safety Solutions \nAbout the Instructor: \nSteve Dukich\, Global Product Manager at Rockwell Automation\, has 40 years of experience in automation and safety. He launched the Guardmaster safety product line in 1999 and has contributed to multiple safety standard committees\, including ISO 11161 and ANSI B11.20. Steve currently focuses on safety relays and the GuardLink system.
URL:https://www.kendallelectric.com/event/machine-safety-seminar-7/
LOCATION:Kendall Electric – Bethlehem\, 2459 Baglyos Circle\, Bethlehem\, PA\, 18020\, United States
CATEGORIES:Kendall Technology Update,Mid-Atlantic
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2024/02/shutterstock_1957221109-scaled-e1709145062846.jpg
GEO:40.6585138;-75.2954086
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Bethlehem 2459 Baglyos Circle Bethlehem PA 18020 United States;X-APPLE-RADIUS=500;X-TITLE=2459 Baglyos Circle:geo:-75.2954086,40.6585138
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250326T090000
DTEND;TZID=America/New_York:20250326T153000
DTSTAMP:20250306T211455Z
CREATED:20250115T202427Z
LAST-MODIFIED:20250306T211455Z
UID:10006821-1742979600-1743003000@www.kendallelectric.com
SUMMARY:Drives Headquarters
DESCRIPTION:You’re invited to a day of power!\nLearn how the Allen-Bradley portfolio of motor control can turn your operational challenges into advantages. Take this opportunity for a hands-on experience configuring\, programming\, and monitoring PowerFlex drives. Interact with Kendall Electric experts to provide you with a comprehensive review of the portfolio and how PowerFlex drives can address the challenges you are facing today. \nThis event features product and technology demonstrations\, and hands-on labs \nSession Topics: \n\nOverview of the PowerFlex family of drives\nPowerFlex 520 and 750 Series Hands-on Labs\nHow to navigate and program these drives using the drive keypad\, with Connected Components Workbench and Logix Designer\nDemonstration of the new PowerFlex 755TS drive with Total Force technology
URL:https://www.kendallelectric.com/event/drives-headquarters-10/
LOCATION:Kendall Electric – Bethlehem\, 2459 Baglyos Circle\, Bethlehem\, PA\, 18020\, United States
CATEGORIES:Kendall Technology Update,Mid-Atlantic
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2025/01/drives-event-image.jpg
ORGANIZER;CN="Mike Lore":MAILTO:michael.lore@kendallelectric.com
GEO:40.6585138;-75.2954086
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Bethlehem 2459 Baglyos Circle Bethlehem PA 18020 United States;X-APPLE-RADIUS=500;X-TITLE=2459 Baglyos Circle:geo:-75.2954086,40.6585138
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250325T090000
DTEND;TZID=America/New_York:20250325T153000
DTSTAMP:20250306T211516Z
CREATED:20250115T202123Z
LAST-MODIFIED:20250306T211516Z
UID:10006820-1742893200-1742916600@www.kendallelectric.com
SUMMARY:Drives Headquarters
DESCRIPTION:You’re invited to a day of power!\nLearn how the Allen-Bradley portfolio of motor control can turn your operational challenges into advantages. Take this opportunity for a hands-on experience configuring\, programming\, and monitoring PowerFlex drives. Interact with Kendall Electric experts to provide you with a comprehensive review of the portfolio and how PowerFlex drives can address the challenges you are facing today. \nThis event features product and technology demonstrations\, and hands-on labs \nSession Topics: \n\nOverview of the PowerFlex family of drives\nPowerFlex 520 and 750 Series Hands-on Labs\nHow to navigate and program these drives using the drive keypad\, with Connected Components Workbench and Logix Designer\nDemonstration of the new PowerFlex 755TS drive with Total Force technology
URL:https://www.kendallelectric.com/event/drives-headquarters-9/
LOCATION:Kendall Electric – Bethlehem\, 2459 Baglyos Circle\, Bethlehem\, PA\, 18020\, United States
CATEGORIES:Kendall Technology Update,Mid-Atlantic
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2025/01/drives-event-image.jpg
ORGANIZER;CN="Mike Lore":MAILTO:michael.lore@kendallelectric.com
GEO:40.6585138;-75.2954086
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Bethlehem 2459 Baglyos Circle Bethlehem PA 18020 United States;X-APPLE-RADIUS=500;X-TITLE=2459 Baglyos Circle:geo:-75.2954086,40.6585138
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250203T130000
DTEND;TZID=America/New_York:20250207T170000
DTSTAMP:20250103T195956Z
CREATED:20240624T134805Z
LAST-MODIFIED:20250103T195956Z
UID:10006508-1738587600-1738947600@www.kendallelectric.com
SUMMARY:Studio 5000 Logix Designer Level 1: ControlLogix Fundamentals and Troubleshooting
DESCRIPTION:CCP299 presented by Rockwell Automation.\nUpon completion of this course\, you should be able to troubleshoot a previously operational ControlLogix® system and restore normal operation. \nYou will have the opportunity to develop and practice these skills by:\n• Learning basic concepts and terminology used with:\n– ControlLogix system hardware\n– Studio 5000 Logix Designer® application\n• Practicing a systematic strategy for diagnosing and troubleshooting problems:\n– Configuration issues\n– Electrical noise\n– Faulty/malfunctioning field devices\n– Controller I/O\, or other hardware issues\n• Performing hands-on exercises
URL:https://www.kendallelectric.com/event/studio-5000-logix-designer-level-1-controllogix-fundamentals-and-troubleshooting-18/
LOCATION:Kendall Electric – Bethlehem\, 2459 Baglyos Circle\, Bethlehem\, PA\, 18020\, United States
CATEGORIES:Mid-Atlantic,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Software.jpg
ORGANIZER;CN="Barbara Dever":MAILTO:barbara.dever@kendallelectric.com
GEO:40.6585138;-75.2954086
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Bethlehem 2459 Baglyos Circle Bethlehem PA 18020 United States;X-APPLE-RADIUS=500;X-TITLE=2459 Baglyos Circle:geo:-75.2954086,40.6585138
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20241121T093000
DTEND;TZID=America/New_York:20241121T140000
DTSTAMP:20241119T184753Z
CREATED:20240920T151648Z
LAST-MODIFIED:20241119T184753Z
UID:10006732-1732181400-1732197600@www.kendallelectric.com
SUMMARY:Introduction to Micro800
DESCRIPTION:Get started with PLC programming and hands-on lessons with Micro820 PLC. \nJoin us for a hands-on lesson where you’ll dive into the essentials of PLC programming with your very own Micro820 starter pack! We will review PLC fundamentals\, ladder logic programming\, and provide interactive demonstrations. \nEach participant will receive a Micro820 Starter Pack. \nParticipants will need to bring their own laptops and install Connected Components Workbench (CCW) to complete the hands-on portion. \nLunch will be provided. \nSession Topics:\n• Introduction to Programmable Logic Controllers\n• Industry applications\n• Ladder Logic Programming basics\n• Navigate Connected Components Workbench software\n• Connect a laptop to a Micro820 PLC\n• Live Demonstration of Micro800\, Kinetix Drive\, and PowerFlex Drive working together.
URL:https://www.kendallelectric.com/event/introduction-to-micro800/
LOCATION:Kendall Electric – Bethlehem\, 2459 Baglyos Circle\, Bethlehem\, PA\, 18020\, United States
CATEGORIES:Kendall Technology Update,Mid-Atlantic
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2024/09/Y1954305-023.jpg
GEO:40.6585138;-75.2954086
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Bethlehem 2459 Baglyos Circle Bethlehem PA 18020 United States;X-APPLE-RADIUS=500;X-TITLE=2459 Baglyos Circle:geo:-75.2954086,40.6585138
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20241113T083000
DTEND;TZID=UTC:20241113T113000
DTSTAMP:20241106T193341Z
CREATED:20240926T172043Z
LAST-MODIFIED:20241106T193341Z
UID:10006743-1731486600-1731497400@www.kendallelectric.com
SUMMARY:Shift into Stratix 5200
DESCRIPTION:Learn about the latest managed switches in Rockwell Automation’s portfolio.\nJoin this half-day training session for a comprehensive exploration of industrial networking. Gain essential skills such as Ethernet/IP fundamentals\, and introductions to VLAN setups and firmware updating. Experience hands-on learning with Stratix 5200 switches and take your networking expertise to the next level. Each student will take home their own switch at the end of the class. \nSESSION TOPICS: \n\nIntro to Ethernet/IP\nNetwork Architectures\nSwitch Portfolio Review\nVLAN Setup’s and Strategies\nSmart Port Setup\nDHCP Pools and Persistence\nSD Card Backups\nNAT and DLR\nFirmware Updating\nManaged industrial Ethernet switch\nSupports layer 2 access switching\nSupports both IT and OT configuration\nUses the Cisco IOS-XE operating system
URL:https://www.kendallelectric.com/event/shift-into-stratix-5200-15/
LOCATION:Kendall Electric – Bethlehem\, 2459 Baglyos Circle\, Bethlehem\, PA\, 18020\, United States
CATEGORIES:Kendall Technology Update,Mid-Atlantic
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2024/04/shutterstock_1442076521-color-balance-scaled.jpg
ORGANIZER;CN="Larry Murray":MAILTO:larry.murray@kendallelectric.com
GEO:40.6585138;-75.2954086
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Bethlehem 2459 Baglyos Circle Bethlehem PA 18020 United States;X-APPLE-RADIUS=500;X-TITLE=2459 Baglyos Circle:geo:-75.2954086,40.6585138
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20240731T090000
DTEND;TZID=UTC:20240731T130000
DTSTAMP:20240715T162735Z
CREATED:20240715T162421Z
LAST-MODIFIED:20240715T162735Z
UID:10006568-1722416400-1722430800@www.kendallelectric.com
SUMMARY:PanelView 5000 Training
DESCRIPTION:Learn how Rockwell Automation’s PanelView 5000 HMI can reduce your design and configuration time. \nThis class will provide hands-on experience configuring your own HMI project. We will review PanelView 5000 features that help navigate design challenges and integration techniques with Rockwell Automation’s Logix PLC platform. \nTOPICS COVERED \n\nPLC communications options\nPVP to View Designer Conversion Utility\nObject libraries & navigation enhancements\nAlarm functions & email notifications\nDatalogging
URL:https://www.kendallelectric.com/event/panelview-5000-training-5/
LOCATION:Kendall Electric – Bethlehem\, 2459 Baglyos Circle\, Bethlehem\, PA\, 18020\, United States
CATEGORIES:Kendall Technology Update,Mid-Atlantic
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2024/06/PanelView-5500-Family.1920.jpg
ORGANIZER;CN="David Florist":MAILTO:david.florist@kendallelectric.com
GEO:40.6585138;-75.2954086
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Bethlehem 2459 Baglyos Circle Bethlehem PA 18020 United States;X-APPLE-RADIUS=500;X-TITLE=2459 Baglyos Circle:geo:-75.2954086,40.6585138
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240730T090000
DTEND;TZID=America/New_York:20240730T130000
DTSTAMP:20240625T131546Z
CREATED:20240620T142814Z
LAST-MODIFIED:20240625T131546Z
UID:10006501-1722330000-1722344400@www.kendallelectric.com
SUMMARY:PanelView 5000 Training
DESCRIPTION:Learn how Rockwell Automation’s PanelView 5000 HMI can reduce your design and configuration time. \nThis class will provide hands-on experience configuring your own HMI project. We will review PanelView 5000 features that help navigate design challenges and integration techniques with Rockwell Automation’s Logix PLC platform. \nTOPICS COVERED \n\nPLC communications options\nPVP to View Designer Conversion Utility\nObject libraries & navigation enhancements\nAlarm functions & email notifications\nDatalogging
URL:https://www.kendallelectric.com/event/panelview-5000-training-4/
LOCATION:Kendall Electric – Bethlehem\, 2459 Baglyos Circle\, Bethlehem\, PA\, 18020\, United States
CATEGORIES:Kendall Technology Update,Mid-Atlantic
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2024/06/PanelView-5500-Family.1920.jpg
ORGANIZER;CN="David Florist":MAILTO:david.florist@kendallelectric.com
GEO:40.6585138;-75.2954086
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Bethlehem 2459 Baglyos Circle Bethlehem PA 18020 United States;X-APPLE-RADIUS=500;X-TITLE=2459 Baglyos Circle:geo:-75.2954086,40.6585138
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240625T083000
DTEND;TZID=America/New_York:20240628T163000
DTSTAMP:20240607T130136Z
CREATED:20240328T170916Z
LAST-MODIFIED:20240607T130136Z
UID:10006423-1719304200-1719592200@www.kendallelectric.com
SUMMARY:Studio 5000 Logix Designer Level 4: Kinetix 5700 (CIP) Programming
DESCRIPTION:CCN144-A presented by Rockwell Automation. After completing this course\, you should be able to configure\, test\, tune\, and program CIP Motion™ axes using the Studio 5000 Logix Designer® application. Building upon the skills gained in the Studio 5000 Logix Designer Level 3: Project Development (CCP143) course\, you will learn how to apply the Logix5000™ architecture to a multi-axis CIP™ motion control system. You will also practice efficient programming skills necessary for translating a machine specification document into reliable ladder logic code.\nBecause all Logix5000 products share common features and a common operating system\, you will be able to apply the motion control configuring and programming skills you learn in this course to any of the Logix5000 controllers that are capable of motion control.
URL:https://www.kendallelectric.com/event/studio-5000-logix-designer-level-4-kinetix-5700-cip-programming-3/
LOCATION:Kendall Electric – Bethlehem\, 2459 Baglyos Circle\, Bethlehem\, PA\, 18020\, United States
CATEGORIES:Mid-Atlantic,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Motion-Control.jpg
ORGANIZER;CN="Barbara Dever":MAILTO:barbara.dever@kendallelectric.com
GEO:40.6585138;-75.2954086
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Bethlehem 2459 Baglyos Circle Bethlehem PA 18020 United States;X-APPLE-RADIUS=500;X-TITLE=2459 Baglyos Circle:geo:-75.2954086,40.6585138
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240418T090000
DTEND;TZID=America/New_York:20240418T153000
DTSTAMP:20240415T175532Z
CREATED:20240318T150630Z
LAST-MODIFIED:20240415T175532Z
UID:10006412-1713430800-1713454200@www.kendallelectric.com
SUMMARY:Drives Headquarters
DESCRIPTION:Learn how the Allen-Bradley portfolio of motor control can turn your operational challenges into advantages. Take this opportunity for a hands-on experience configuring\, programming\, and monitoring PowerFlex drives. Interact with Kendall Electric experts to provide you with a comprehensive review of the portfolio and how PowerFlex drives can address the challenges you are facing today. \nThis event features product and technology demonstrations\, and hands-on labs. \nSession Topics: \n\nOverview of the PowerFlex family of drives\nPowerFlex 520 and 750 Series Hands-on Labs\nHow to navigate and program these drives using the drive keypad\, with Connected Components Workbench and Logix Designer\nDemonstration of the new PowerFlex 755TS drive with Total Force technology\nRA Foundations – Drive Labs\n\n\nOverview of Connected Components Workbench for AC Drives\nConfiguring a PowerFlex 525 using Connected Components Workbench\nConfiguring a PowerFlex 755TS using Connected Components Workbench\nPremier Integration with PowerFlex 525 and PowerFlex 755TS drives\nTrending in Connected Components Workbench\nAutomatic Device Configuration\n\n\nPowerFlex755TS – S4 Advanced Safety Lab\n\nDemonstrate SS1 timed (drive initiated)\nDemonstrate SS1 monitored (controller initiated)\nDemonstrate Safely-Limited Speed (SLS)\nDoor Monitoring configuration.
URL:https://www.kendallelectric.com/event/drives-headquarters-2/
LOCATION:Kendall Electric – Bethlehem\, 2459 Baglyos Circle\, Bethlehem\, PA\, 18020\, United States
CATEGORIES:Kendall Technology Update,Mid-Atlantic
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Drives.jpg
ORGANIZER;CN="Barbara Dever":MAILTO:barbara.dever@kendallelectric.com
GEO:40.6585138;-75.2954086
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Bethlehem 2459 Baglyos Circle Bethlehem PA 18020 United States;X-APPLE-RADIUS=500;X-TITLE=2459 Baglyos Circle:geo:-75.2954086,40.6585138
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240417T090000
DTEND;TZID=America/New_York:20240417T153000
DTSTAMP:20240415T175421Z
CREATED:20240318T150404Z
LAST-MODIFIED:20240415T175421Z
UID:10006410-1713344400-1713367800@www.kendallelectric.com
SUMMARY:Drives Headquarters
DESCRIPTION:Learn how the Allen-Bradley portfolio of motor control can turn your operational challenges into advantages. Take this opportunity for a hands-on experience configuring\, programming\, and monitoring PowerFlex drives. Interact with Kendall Electric experts to provide you with a comprehensive review of the portfolio and how PowerFlex drives can address the challenges you are facing today. \nThis event features product and technology demonstrations\, and hands-on labs. \nSession Topics: \n\nOverview of the PowerFlex family of drives\nPowerFlex 520 and 750 Series Hands-on Labs\nHow to navigate and program these drives using the drive keypad\, with Connected Components Workbench and Logix Designer\nDemonstration of the new PowerFlex 755TS drive with Total Force technology\nRA Foundations – Drive Labs\n\n\nOverview of Connected Components Workbench for AC Drives\nConfiguring a PowerFlex 525 using Connected Components Workbench\nConfiguring a PowerFlex 755TS using Connected Components Workbench\nPremier Integration with PowerFlex 525 and PowerFlex 755TS drives\nTrending in Connected Components Workbench\nAutomatic Device Configuration\n\n\nPowerFlex755TS – S4 Advanced Safety Lab\n\nDemonstrate SS1 timed (drive initiated)\nDemonstrate SS1 monitored (controller initiated)\nDemonstrate Safely-Limited Speed (SLS)\nDoor Monitoring configuration.
URL:https://www.kendallelectric.com/event/drives-headquarters/
LOCATION:Kendall Electric – Bethlehem\, 2459 Baglyos Circle\, Bethlehem\, PA\, 18020\, United States
CATEGORIES:Kendall Technology Update,Mid-Atlantic
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Drives.jpg
ORGANIZER;CN="Barbara Dever":MAILTO:barbara.dever@kendallelectric.com
GEO:40.6585138;-75.2954086
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Bethlehem 2459 Baglyos Circle Bethlehem PA 18020 United States;X-APPLE-RADIUS=500;X-TITLE=2459 Baglyos Circle:geo:-75.2954086,40.6585138
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240311T083000
DTEND;TZID=America/New_York:20240315T163000
DTSTAMP:20240305T153251Z
CREATED:20230927T144646Z
LAST-MODIFIED:20240305T153251Z
UID:10006032-1710145800-1710520200@www.kendallelectric.com
SUMMARY:Accelerated Logix5000 Programmer Certificate Level 1
DESCRIPTION:CCP250 presented by Rockwell Automation. This accelerated course is for individuals who can quickly learn and apply Logix5000™ concepts\, terminology\, hardware\, and the Studio 5000 Logix Designer® programming environment. You will quickly move from these early concepts to using producer/ consumer technology and messages to multicast input and output devices\, share data between controllers\, and control remote I/O. This course prepares you for the Accelerated Logix5000 Programmer Certificate Course Level 1 certificate exam\, which is included in the course price.
URL:https://www.kendallelectric.com/event/accelerated-logix5000-programmer-certificate-level-1-3/
LOCATION:Kendall Electric – Bethlehem\, 2459 Baglyos Circle\, Bethlehem\, PA\, 18020\, United States
CATEGORIES:Mid-Atlantic,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Software.jpg
ORGANIZER;CN="Barbara Dever":MAILTO:barbara.dever@kendallelectric.com
GEO:40.6585138;-75.2954086
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Bethlehem 2459 Baglyos Circle Bethlehem PA 18020 United States;X-APPLE-RADIUS=500;X-TITLE=2459 Baglyos Circle:geo:-75.2954086,40.6585138
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240214T090000
DTEND;TZID=America/New_York:20240216T163000
DTSTAMP:20231204T164228Z
CREATED:20230927T151735Z
LAST-MODIFIED:20231204T164228Z
UID:10006058-1707901200-1708101000@www.kendallelectric.com
SUMMARY:Fundamentals of PowerFlex 525 VFD Wiring and Commissioning
DESCRIPTION:Learn how to wire\, program\, and operate Variable Frequency Drives during this three-day course that covers a combination of instructor-led discussions\, demonstrations\, and hands-on labs. Using a VFD workstation\, HMI module and hand-held VFD test module\, students will leave with a better understanding of various control configurations and applications. Students will also test and troubleshoot VFDs using Fluke test and measurement equipment.
URL:https://www.kendallelectric.com/event/fundamentals-of-powerflex-vfd525-wiring-and-commissioning-4/
LOCATION:Kendall Electric – Bethlehem\, 2459 Baglyos Circle\, Bethlehem\, PA\, 18020\, United States
CATEGORIES:Kendall Connected Training,Mid-Atlantic
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_KCT_Powerflex525.jpg
ORGANIZER;CN="Barbara Dever":MAILTO:barbara.dever@kendallelectric.com
GEO:40.6585138;-75.2954086
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Bethlehem 2459 Baglyos Circle Bethlehem PA 18020 United States;X-APPLE-RADIUS=500;X-TITLE=2459 Baglyos Circle:geo:-75.2954086,40.6585138
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240213T090000
DTEND;TZID=America/New_York:20240213T163000
DTSTAMP:20240926T141357Z
CREATED:20230927T151806Z
LAST-MODIFIED:20240926T141357Z
UID:10006060-1707814800-1707841800@www.kendallelectric.com
SUMMARY:Intro to Micro 800 PLC & PanelView 800 HMI
DESCRIPTION:This one-day class introduces both the Allen-Bradley Micro800® Controllers and PanelView® 800 Graphic Terminals\, all in one day. Training workstations consisting of a Micro850 controller\, PanelView® 800\, and utilizing Connected Components Workbench™ (CCW) software will allow students to review hardware and software basics. Students will then create controller programs and PanelView applications illustrating the interaction between the two devices. Note: This is an introduction class and is not intended as a full instructional programming class
URL:https://www.kendallelectric.com/event/intro-to-micro-800-plc-panelview-800-hmi-5/
LOCATION:Kendall Electric – Bethlehem\, 2459 Baglyos Circle\, Bethlehem\, PA\, 18020\, United States
CATEGORIES:Kendall Connected Training,Mid-Atlantic
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_KCT_Micro.jpg
ORGANIZER;CN="Barbara Dever":MAILTO:barbara.dever@kendallelectric.com
GEO:40.6585138;-75.2954086
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Bethlehem 2459 Baglyos Circle Bethlehem PA 18020 United States;X-APPLE-RADIUS=500;X-TITLE=2459 Baglyos Circle:geo:-75.2954086,40.6585138
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240212T090000
DTEND;TZID=America/New_York:20240212T163000
DTSTAMP:20231204T164313Z
CREATED:20230926T180114Z
LAST-MODIFIED:20231204T164313Z
UID:10006019-1707728400-1707755400@www.kendallelectric.com
SUMMARY:Intro to Stratix 5200
DESCRIPTION:This one-day instructor-led training will review why the Stratix 5200 is an ideal match for end users and machine builders interested in managed features at optimum feasible cost. We will review the needs of switches today\, what differentiates a managed switch\, and include hands-on training to review most Stratix 5200 functionality.
URL:https://www.kendallelectric.com/event/intro-to-stratix-5200/
LOCATION:Kendall Electric – Bethlehem\, 2459 Baglyos Circle\, Bethlehem\, PA\, 18020\, United States
CATEGORIES:Kendall Connected Training,Mid-Atlantic
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Networking.jpg
ORGANIZER;CN="Barbara Dever":MAILTO:barbara.dever@kendallelectric.com
GEO:40.6585138;-75.2954086
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Bethlehem 2459 Baglyos Circle Bethlehem PA 18020 United States;X-APPLE-RADIUS=500;X-TITLE=2459 Baglyos Circle:geo:-75.2954086,40.6585138
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240205T083000
DTEND;TZID=America/New_York:20240209T163000
DTSTAMP:20231204T164332Z
CREATED:20230927T152311Z
LAST-MODIFIED:20231204T164332Z
UID:10006071-1707121800-1707496200@www.kendallelectric.com
SUMMARY:Motor Control and Troubleshooting
DESCRIPTION:EMS-230 presented by Rockwell Automation. This course provides information on the concepts associated with systematic troubleshooting of electrical motor control systems. Participants use practical application of troubleshooting techniques in exercise scenarios. \nAfter completing this course\, students should be able to perform the following tasks: \n\nList and explain a systematic approach to troubleshooting electrical circuits\nList and describe the purpose and application of various motor control components\nExplain methods for inspecting electrical contacts\nDescribe the basic methods of starting a three-phase AC motor using full or reduced voltage\nDescribe the basic operation of a three-phase AC motor\nDescribe methods for troubleshooting AC motors\nApply a systematic approach to troubleshooting motor control circuits\nDesign and construct motor control circuits\nImplement proper motor control troubleshooting techniques\nAnalyze and evaluate faults to determine failed motor control components
URL:https://www.kendallelectric.com/event/motor-control-and-troubleshooting/
LOCATION:Kendall Electric – Bethlehem\, 2459 Baglyos Circle\, Bethlehem\, PA\, 18020\, United States
CATEGORIES:Mid-Atlantic,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Motion-Control.jpg
ORGANIZER;CN="Barbara Dever":MAILTO:barbara.dever@kendallelectric.com
GEO:40.6585138;-75.2954086
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Bethlehem 2459 Baglyos Circle Bethlehem PA 18020 United States;X-APPLE-RADIUS=500;X-TITLE=2459 Baglyos Circle:geo:-75.2954086,40.6585138
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20231003T080000
DTEND;TZID=UTC:20231006T163000
DTSTAMP:20230925T134255Z
CREATED:20230830T161030Z
LAST-MODIFIED:20230925T134255Z
UID:10005950-1696320000-1696609800@www.kendallelectric.com
SUMMARY:Industrial Electrical Controls Fundamentals
DESCRIPTION:MFG213 presented by Rockwell Automation. This course is designed to provide knowledge and skills required to install\, maintain and troubleshoot machine controls.
URL:https://www.kendallelectric.com/event/industrial-electrical-controls-fundamentals/
LOCATION:Kendall Electric – Bethlehem\, 2459 Baglyos Circle\, Bethlehem\, PA\, 18020\, United States
CATEGORIES:Mid-Atlantic,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Safety.jpg
ORGANIZER;CN="Barbara Dever":MAILTO:barbara.dever@kendallelectric.com
GEO:40.6585138;-75.2954086
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Bethlehem 2459 Baglyos Circle Bethlehem PA 18020 United States;X-APPLE-RADIUS=500;X-TITLE=2459 Baglyos Circle:geo:-75.2954086,40.6585138
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20230821T080000
DTEND;TZID=America/New_York:20230825T163000
DTSTAMP:20230829T165209Z
CREATED:20230724T105733Z
LAST-MODIFIED:20230829T165209Z
UID:10000044-1692604800-1692981000@www.kendallelectric.com
SUMMARY:Studio 5000 Logix Designer Level 1: CompactLogix Fundamentals and Troubleshooting
DESCRIPTION:Upon completion of this course\, you should be able to troubleshoot a previously operational CompactLogix™ system and restore normal operation. In this course you will develop and practice these skills by:\nLearning basic concepts and terminology used with:\n• CompactLogix system hardware\n• Studio 5000 Logix Designer® application \nPracticing a systematic strategy for diagnosing and troubleshooting problems:\n• Faulty/malfunctioning field devices\n• Controller\, I/O\, or other hardware issues\n• Electrical Noise\n• Configuration issues \nPerforming hands-on exercises\n• All Logix5000™ systems use the same control engine; therefore\, tasks are similar. You will see applicable references for other systems.
URL:https://www.kendallelectric.com/event/studio-5000-logix-designer-level-1-compactlogix-fundamentals-and-troubleshooting/
LOCATION:Kendall Electric – Bethlehem\, 2459 Baglyos Circle\, Bethlehem\, PA\, 18020\, United States
CATEGORIES:Mid-Atlantic,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Software.jpg
ORGANIZER;CN="Barbara Dever":MAILTO:barbara.dever@kendallelectric.com
GEO:40.6585138;-75.2954086
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Bethlehem 2459 Baglyos Circle Bethlehem PA 18020 United States;X-APPLE-RADIUS=500;X-TITLE=2459 Baglyos Circle:geo:-75.2954086,40.6585138
END:VEVENT
END:VCALENDAR