BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//Kendall Electric - ECPv6.17.1//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-WR-CALNAME:Kendall Electric
X-ORIGINAL-URL:https://www.kendallelectric.com
X-WR-CALDESC:Events for Kendall Electric
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:America/New_York
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20250309T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20251102T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20260308T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20261101T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20270314T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20271107T060000
END:STANDARD
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:America/Chicago
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20250309T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20251102T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20260308T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20261101T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20270314T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20271107T070000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260728T083000
DTEND;TZID=America/New_York:20260730T163000
DTSTAMP:20260721T141053Z
CREATED:20260107T163200Z
LAST-MODIFIED:20260721T141053Z
UID:10006519-1785227400-1785429000@www.kendallelectric.com
SUMMARY:Motion Control Fundamentals using Kinetix 5700 (CIP) Servo Drives
DESCRIPTION:CCN132 presented by Rockwell Automation. \nUpon completion of this course\, you should be able to demonstrate fundamental motion control concepts common to all Rockwell Automation motion control systems. \nThis course is designed to provide you with an understanding of the concepts\, terminology\, functionality\, and applications of motion control. This course will also allow you to establish the foundation you need before learning the skills necessary to maintain and program motion control systems. \nThis course does not address motion control system design or specific motion control software programming. If you are seeking training in these areas\, you should enroll in the relevant Rockwell Automation training courses\, making sure you have fulfilled the prerequisites for those courses prior to enrollment.
URL:https://www.kendallelectric.com/event/motion-control-fundamentals-using-kinetix-5700-cip-servo-drives-9/
LOCATION:Kendall Electric – Holland\, 11581 Green Way Drive\, Holland\, MI\, 49424\, United States
CATEGORIES:Great Lakes North,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Motion-Control.jpg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:42.8081538;-86.0677026
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Holland 11581 Green Way Drive Holland MI 49424 United States;X-APPLE-RADIUS=500;X-TITLE=11581 Green Way Drive:geo:-86.0677026,42.8081538
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260721T083000
DTEND;TZID=America/Chicago:20260723T163000
DTSTAMP:20260326T133433Z
CREATED:20260116T195228Z
LAST-MODIFIED:20260326T133433Z
UID:10007063-1784622600-1784824200@www.kendallelectric.com
SUMMARY:PowerFlex 750 Series Configuration\, Startup\, Maintenance\, and Troubleshooting
DESCRIPTION:DRV215 presented by Rockwell Automation. \nUpon completion of this course\, given a wired PowerFlex 750-Series drive (PowerFlex 753 or PowerFlex 755) and AC motor\, you will be able to install the drive correctly\, start it up\, and configure drive parameters to meet application-specific needs. \nThe course also introduces concepts and techniques that will assist you in successfully maintaining and troubleshooting the drive\, recognizing PowerFlex 750-Series drive hardware\, and diagnosing specific faults. \nThroughout the course\, you will have the chance to use a variety of hardware and software tools\, including: \n\nTHE A6 LCD HIM\nConnected Components Workbench™ software\nDriveExecutive™ software.\n\nAfter each demonstration\, you will be given exercises that offer extensive hands-on practice using a PowerFlex 753 or Powerflex 755 drive.
URL:https://www.kendallelectric.com/event/powerflex-750-series-configuration-startup-maintenance-and-troubleshooting-7/
LOCATION:Kendall Electric – Montgomery\, 1029 Lagoon Business Loop\, Montgomery\, AL\, 36117\, United States
CATEGORIES:Rockwell Instructor-Led,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Networking.jpg
ORGANIZER;CN="Melissa Kincaid":MAILTO:melissa.kincaid@kendallelectric.com
GEO:32.4067572;-86.2182565
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Montgomery 1029 Lagoon Business Loop Montgomery AL 36117 United States;X-APPLE-RADIUS=500;X-TITLE=1029 Lagoon Business Loop:geo:-86.2182565,32.4067572
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260714T083000
DTEND;TZID=America/Chicago:20260717T163000
DTSTAMP:20260326T133256Z
CREATED:20260114T211912Z
LAST-MODIFIED:20260326T133256Z
UID:10007054-1784017800-1784305800@www.kendallelectric.com
SUMMARY:Studio 5000™ Logix Designer Level 3: Project Development
DESCRIPTION:CCP143 presented by Rockwell Automation. \nUpon completion of this course\, given a functional specification for a Logix5000™ application\, you should be able to develop a project to meet the specification requirements. \nThis course covers tasks common to the following hardware\, which all use the Logix5000 control engine: \n\nControlLogix® controllers\nCompactLogix™ controllers\nSoftLogix™ controllers\n\nThis course builds upon your knowledge of common controller terms and operation and your experience with basic ladder logic programming. You can gain a deeper understanding of project development tasks that are common to all Logix5000 controllers. Such tasks include organizing tasks and routines\, organizing controller data\, configuring modules\, and sharing data. You will also use producer/consumer technology for multicasting to input and output devices\, sharing data between controllers\, and controlling remote I/O.
URL:https://www.kendallelectric.com/event/studio-5000-logix-designer-level-3-project-development-22/
LOCATION:Kendall Electric – Jackson\, 25 American Drive\, Jackson\, TN\, 38301\, United States
CATEGORIES:Rockwell Instructor-Led,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Software.jpg
ORGANIZER;CN="Melissa Kincaid":MAILTO:melissa.kincaid@kendallelectric.com
GEO:35.6327873;-88.7853842
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Jackson 25 American Drive Jackson TN 38301 United States;X-APPLE-RADIUS=500;X-TITLE=25 American Drive:geo:-88.7853842,35.6327873
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260618T083000
DTEND;TZID=America/New_York:20260619T163000
DTSTAMP:20260413T130017Z
CREATED:20260107T162825Z
LAST-MODIFIED:20260413T130017Z
UID:10006517-1781771400-1781886600@www.kendallelectric.com
SUMMARY:Studio 5000 Logix Designer Level 2: Basic Ladder Logic Programming
DESCRIPTION:CCP151 presented by Rockwell Automation. \nAfter completing this course\, you should be able to program basic ladder logic instructions for Logix5000™ controllers. This is a skill-building course that provides you with the resources and hands-on practice required to complete this objective. \nYou will have an opportunity to use the Studio 5000 Logix Designer® application to perform basic software tasks to meet the requirements of a given functional specification. In addition\, you will set up a sequencer to run equipment through a predefined procedure and separate production procedure from equipment control.
URL:https://www.kendallelectric.com/event/studio-5000-logix-designer-level-2-basic-ladder-logic-programming-52/
LOCATION:Kendall Electric – Holland\, 11581 Green Way Drive\, Holland\, MI\, 49424\, United States
CATEGORIES:Great Lakes North,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Software.jpg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:42.8081538;-86.0677026
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Holland 11581 Green Way Drive Holland MI 49424 United States;X-APPLE-RADIUS=500;X-TITLE=11581 Green Way Drive:geo:-86.0677026,42.8081538
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260616T083000
DTEND;TZID=America/New_York:20260619T123000
DTSTAMP:20260326T133213Z
CREATED:20260119T162154Z
LAST-MODIFIED:20260326T133213Z
UID:10007075-1781598600-1781872200@www.kendallelectric.com
SUMMARY:FactoryTalk Historian SE Configuration and Data Collection
DESCRIPTION:RS-FTHSEC presented by Rockwell Automation. \nThis course will provide you with an overview of the various FactoryTalk® Historian tools for collecting data. You will learn how to configure a FactoryTalk Historian Site Edition system. The course also covers how to use Microsoft Excel to create and modify FactoryTalk Historian tags. \nDuring the course\, you will learn how to apply exception and compression to filter data to be archived. Also\, you will be given an opportunity to compare the use of Polled versus Advised data collection modes. Data buffering\, layers/methods of redundancy\, archive management and backup will also be covered. \nUpon completion of the course\, you will have gained exposure to the many aspects of the FactoryTalk Historian system and be able to configure FactoryTalk Historian to collect data.
URL:https://www.kendallelectric.com/event/factorytalk-historian-se-configuration-and-data-collection-4/
LOCATION:Kendall Electric – Knoxville\, 170 Mabry Hood Road\, Knoxville\, TN\, 37922\, United States
CATEGORIES:Rockwell Instructor-Led,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Visualization.jpg
ORGANIZER;CN="Melissa Kincaid":MAILTO:melissa.kincaid@kendallelectric.com
GEO:35.907472;-84.1186772
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Knoxville 170 Mabry Hood Road Knoxville TN 37922 United States;X-APPLE-RADIUS=500;X-TITLE=170 Mabry Hood Road:geo:-84.1186772,35.907472
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260616T083000
DTEND;TZID=America/Chicago:20260618T163000
DTSTAMP:20260326T133114Z
CREATED:20260114T210724Z
LAST-MODIFIED:20260326T133114Z
UID:10007052-1781598600-1781800200@www.kendallelectric.com
SUMMARY:Motion Control Fundamentals Using Kinetix 5700 (CIP) Servo Drives
DESCRIPTION:CCN132 presented by Rockwell Automation. \nUpon completion of this course\, you should be able to demonstrate fundamental motion control concepts common to all Rockwell Automation motion control systems. \nThis course is designed to provide you with an understanding of the concepts\, terminology\, functionality\, and applications of motion control. This course will also allow you to establish the foundation you need before learning the skills necessary to maintain and program motion control systems. \nThis course does not address motion control system design or specific motion control software programming. If you are seeking training in these areas\, you should enroll in the relevant Rockwell Automation training courses\, making sure you have fulfilled the prerequisites for those courses prior to enrollment.
URL:https://www.kendallelectric.com/event/motion-control-fundamentals-using-kinetix-5700-cip-servo-drives-10/
LOCATION:Kendall Electric – Jackson\, 25 American Drive\, Jackson\, TN\, 38301\, United States
CATEGORIES:Rockwell Instructor-Led,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Motion-Control.jpg
ORGANIZER;CN="Melissa Kincaid":MAILTO:melissa.kincaid@kendallelectric.com
GEO:35.6327873;-88.7853842
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Jackson 25 American Drive Jackson TN 38301 United States;X-APPLE-RADIUS=500;X-TITLE=25 American Drive:geo:-88.7853842,35.6327873
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260616T083000
DTEND;TZID=America/New_York:20260617T163000
DTSTAMP:20260413T125905Z
CREATED:20260107T162443Z
LAST-MODIFIED:20260413T125905Z
UID:10006515-1781598600-1781713800@www.kendallelectric.com
SUMMARY:Studio 5000 Logix Designer Level 1: ControlLogix System Fundamentals
DESCRIPTION:CCP146 presented by Rockwell Automation. \nAfter completing this course\, you should be able to perform basic ControlLogix® and Studio 5000 Logix Designer® tasks\, such as: \n\nCreating and configuring a project\nCommunicating with a controller\n\nThe course will assist you in developing and building a solid foundation with a fundamental knowledge of ControlLogix and other Logix5000™ systems. You will be introduced to basic Logix5000 concepts and terminology\, and you will be exposed to Logix5000 system hardware\, including hands-on experience with the ControlLogix platform.
URL:https://www.kendallelectric.com/event/studio-5000-logix-designer-level-1-controllogix-systen-fundamentals/
LOCATION:Kendall Electric – Holland\, 11581 Green Way Drive\, Holland\, MI\, 49424\, United States
CATEGORIES:Great Lakes North,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Software.jpg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:42.8081538;-86.0677026
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Holland 11581 Green Way Drive Holland MI 49424 United States;X-APPLE-RADIUS=500;X-TITLE=11581 Green Way Drive:geo:-86.0677026,42.8081538
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260615T123000
DTEND;TZID=America/Chicago:20260619T163000
DTSTAMP:20260326T133020Z
CREATED:20260116T155005Z
LAST-MODIFIED:20260326T133020Z
UID:10007058-1781526600-1781886600@www.kendallelectric.com
SUMMARY:Studio 5000 Logix Designer Level 1: ControlLogix Fundamentals and Troubleshooting
DESCRIPTION:CCP299 presented by Rockwell Automation. \nUpon completion of this course\, you should be able to troubleshoot a previously operational ControlLogix® system and restore normal operation. \nYou will have the opportunity to develop and practice these skills by: \n\nLearning basic concepts and terminology used with:\nControlLogix system hardware\nStudio 5000 Logix Designer® application\nPracticing a systematic strategy for diagnosing and troubleshooting problems:\n\nConfiguration issues\nElectrical noise\nFaulty/malfunctioning field devices\nController I/O\, or other hardware issues\nPerforming hands-on exercises
URL:https://www.kendallelectric.com/event/studio-5000-logix-designer-level-1-controllogix-fundamentals-and-troubleshooting-43/
LOCATION:Kendall Electric – Montgomery\, 1029 Lagoon Business Loop\, Montgomery\, AL\, 36117\, United States
CATEGORIES:Rockwell Instructor-Led,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Software.jpg
ORGANIZER;CN="Melissa Kincaid":MAILTO:melissa.kincaid@kendallelectric.com
GEO:32.4067572;-86.2182565
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Montgomery 1029 Lagoon Business Loop Montgomery AL 36117 United States;X-APPLE-RADIUS=500;X-TITLE=1029 Lagoon Business Loop:geo:-86.2182565,32.4067572
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260611T083000
DTEND;TZID=America/New_York:20260612T163000
DTSTAMP:20260312T190503Z
CREATED:20260120T175043Z
LAST-MODIFIED:20260312T190503Z
UID:10007076-1781166600-1781281800@www.kendallelectric.com
SUMMARY:Studio 5000 Logix Designer Level 2: Basic Ladder Logic Programming
DESCRIPTION:CCP151 presented by Rockwell Automation. After completing this course\, you should be able to program basic ladder logic instructions for Logix5000™ controllers. This is a skill-building course that provides you with the resources and hands-on practice required to complete this objective. You will have an opportunity to use the Studio 5000 Logix Designer® application to perform basic software tasks to meet the requirements of a given functional specification. In addition\, you will set up a sequencer to run equipment through a predefined procedure and separate production procedure from equipment control.
URL:https://www.kendallelectric.com/event/studio-5000-logix-designer-level-2-basic-ladder-logic-programming-58/
LOCATION:Kendall Electric – Conshohocken\, 15 Colwell Lane\, Conshohocken\, PA\, 19428\, United States
CATEGORIES:Mid-Atlantic,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Software.jpg
ORGANIZER;CN="Barbara Dever":MAILTO:barbara.dever@kendallelectric.com
GEO:40.0798115;-75.3104239
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Conshohocken 15 Colwell Lane Conshohocken PA 19428 United States;X-APPLE-RADIUS=500;X-TITLE=15 Colwell Lane:geo:-75.3104239,40.0798115
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260609T083000
DTEND;TZID=America/New_York:20260612T163000
DTSTAMP:20260326T132838Z
CREATED:20260119T150652Z
LAST-MODIFIED:20260326T132838Z
UID:10007072-1780993800-1781281800@www.kendallelectric.com
SUMMARY:Industrial Electrical Controls Fundamentals
DESCRIPTION:MFG213 presented by Rockwell Automation. \nThis course is designed to provide knowledge and skills required to install\, maintain and troubleshoot machine controls. \nAt the completion of this course\, you will be able to: \n\nDefine the safety considerations that must be observed when installing\, checking or locking out electrical equipment\nDefine uses and functions of input and output devices\, relays\, and motors\nDemonstrate the reading of schematic diagrams and logic\nDefine an open and short condition and perform voltage and current measurements\nDemonstrate the proper use of the following test equipment in lab to measure voltage\, current\, resistance and continuity: VOM\, DVM\, Multi-meters\, continuity tester and amp probe\nApproximate secondary voltage\, secondary current and primary current of a transformer when given its turns ratio\, primary voltage and secondary load\nIdentify the proper wiring configurations of a control transformer’s primary current for 240V and 480V operation\nApproximate a transformer’s maximum primary current for 480V operation\, using the nameplate information
URL:https://www.kendallelectric.com/event/industrial-electrical-controls-fundamentals-23/
LOCATION:Kendall Electric – Chattanooga\, 6233 Airpark Drive\, Chattanooga\, TN\, 37421\, United States
CATEGORIES:Rockwell Instructor-Led,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Networking.jpg
ORGANIZER;CN="Melissa Kincaid":MAILTO:melissa.kincaid@kendallelectric.com
GEO:35.0354726;-85.1861614
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Chattanooga 6233 Airpark Drive Chattanooga TN 37421 United States;X-APPLE-RADIUS=500;X-TITLE=6233 Airpark Drive:geo:-85.1861614,35.0354726
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260609T083000
DTEND;TZID=America/New_York:20260610T163000
DTSTAMP:20260312T190411Z
CREATED:20260120T174814Z
LAST-MODIFIED:20260312T190411Z
UID:10006564-1780993800-1781109000@www.kendallelectric.com
SUMMARY:Studio 5000 Logix Designer Level 1: ControlLogix System Fundamentals
DESCRIPTION:CCP146 presented by Rockwell Automation. After completing this course\, you should be able to perform basic ControlLogix® and Studio 5000 Logix Designer® tasks\, such as:\n• Creating and configuring a project\n• Communicating with a controller \nThe course will assist you in developing and building a solid foundation with a fundamental knowledge of ControlLogix and other Logix5000™ systems. You will be introduced to basic Logix5000 concepts and terminology\, and you will be exposed to Logix5000 system hardware\, including hands-on experience with the ControlLogix platform.
URL:https://www.kendallelectric.com/event/studio-5000-logix-designer-level-1-controllogix-system-fundamentals-55/
LOCATION:Kendall Electric – Conshohocken\, 15 Colwell Lane\, Conshohocken\, PA\, 19428\, United States
CATEGORIES:Mid-Atlantic,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Software.jpg
ORGANIZER;CN="Barbara Dever":MAILTO:barbara.dever@kendallelectric.com
GEO:40.0798115;-75.3104239
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Conshohocken 15 Colwell Lane Conshohocken PA 19428 United States;X-APPLE-RADIUS=500;X-TITLE=15 Colwell Lane:geo:-75.3104239,40.0798115
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260602T083000
DTEND;TZID=America/New_York:20260604T163000
DTSTAMP:20260312T190319Z
CREATED:20260120T174640Z
LAST-MODIFIED:20260312T190319Z
UID:10006562-1780389000-1780590600@www.kendallelectric.com
SUMMARY:Motion Control Fundamentals Using Kinetix 5700 (CIP) Servo Drives
DESCRIPTION:CCN132 presented by Rockwell Automation. Upon completion of this course\, you should be able to demonstrate fundamental motion control concepts common to all Rockwell Automation motion control systems. This course is designed to provide you with an understanding of the concepts\, terminology\, functionality\, and applications of motion control. This course will also allow you to establish the foundation you need before learning the skills necessary to maintain and program motion control systems. \nThis course does not address motion control system design or specific motion control software programming. If you are seeking training in these areas\, you should enroll in the relevant Rockwell Automation training courses\, making sure you have fulfilled the prerequisites for those courses prior to enrollment.
URL:https://www.kendallelectric.com/event/motion-control-fundamentals-using-kinetix-5700-cip-servo-drives-11/
LOCATION:Kendall Electric – Conshohocken\, 15 Colwell Lane\, Conshohocken\, PA\, 19428\, United States
CATEGORIES:Mid-Atlantic,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Motion-Control.jpg
ORGANIZER;CN="Barbara Dever":MAILTO:barbara.dever@kendallelectric.com
GEO:40.0798115;-75.3104239
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Conshohocken 15 Colwell Lane Conshohocken PA 19428 United States;X-APPLE-RADIUS=500;X-TITLE=15 Colwell Lane:geo:-75.3104239,40.0798115
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260527T083000
DTEND;TZID=America/Chicago:20260529T163000
DTSTAMP:20260326T132757Z
CREATED:20260119T162735Z
LAST-MODIFIED:20260326T132757Z
UID:10006550-1779870600-1780072200@www.kendallelectric.com
SUMMARY:GuardLogix Application Development and Troubleshooting
DESCRIPTION:SAF-LOG104 presented by Rockwell Automation. \nUpon completion of this course\, you will be able to create a Studio 5000 Logix Designer® project for a GuardLogix® system and troubleshoot a previously operational GuardLogix system. \nYou will have the opportunity to develop and practice these skills by: \n\nLearning GuardLogix concepts and terminology\nCreating and configuring a GuardLogix project:\nAdding and configuring CompactBlock™ Guard I/O™ and POINT Guard I/O™ safety modules:\nGenerating Safety Signatures and locking/unlocking a GuardLogix controller\nProgramming safety instructions\nTroubleshooting a GuardLogix project
URL:https://www.kendallelectric.com/event/guardlogix-application-development-and-troubleshooting-21/
LOCATION:Kendall Electric – Jackson\, 25 American Drive\, Jackson\, TN\, 38301\, United States
CATEGORIES:Rockwell Instructor-Led,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Safety.jpg
ORGANIZER;CN="Melissa Kincaid":MAILTO:melissa.kincaid@kendallelectric.com
GEO:35.6327873;-88.7853842
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Jackson 25 American Drive Jackson TN 38301 United States;X-APPLE-RADIUS=500;X-TITLE=25 American Drive:geo:-88.7853842,35.6327873
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260527T083000
DTEND;TZID=America/Chicago:20260528T163000
DTSTAMP:20260326T132703Z
CREATED:20260119T143412Z
LAST-MODIFIED:20260326T132703Z
UID:10007069-1779870600-1779985800@www.kendallelectric.com
SUMMARY:Electrical Safety for Qualified Personnel
DESCRIPTION:FND-035 presented by Rockwell Automation. \nThis is an in-depth electrical safety course that covers electrical safety including LOTO and arc flash that meets the training requirements specified in OSHA 1910 and NFPA 70E. \nUpon completion of this course\, the participants will be able to do the following: N54 \n\nDescribe general safety hazards and precautions associated with electrical systems\nDescribe electrical tool and equipment safety\nDefine voltage level conventions for electrical systems\nDescribe electrical system lockout/tagout requirements\nIdentify the requirements for working on energized equipment\nGiven a scenario\, describe the requirements associated with arc flash protection\nGiven a scenario\, discuss the proper use of personal protective equipment\nDescribe the proper use of electrical protective rubber goods\nExplain the requirements for protective grounding\nDescribe the electrical safety requirements associated with fuses\nDescribe the electrical safety requirements associated with switchgear and circuit breakers\nDescribe the electrical safety requirements for batteries and DC systems
URL:https://www.kendallelectric.com/event/electrical-safety-for-qualified-personnel-5/
LOCATION:Kendall Electric – Montgomery\, 1029 Lagoon Business Loop\, Montgomery\, AL\, 36117\, United States
CATEGORIES:Rockwell Instructor-Led,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Safety.jpg
ORGANIZER;CN="Melissa Kincaid":MAILTO:melissa.kincaid@kendallelectric.com
GEO:32.4067572;-86.2182565
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Montgomery 1029 Lagoon Business Loop Montgomery AL 36117 United States;X-APPLE-RADIUS=500;X-TITLE=1029 Lagoon Business Loop:geo:-86.2182565,32.4067572
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260512T083000
DTEND;TZID=America/Chicago:20260515T163000
DTSTAMP:20260326T132102Z
CREATED:20260116T155704Z
LAST-MODIFIED:20260326T132102Z
UID:10007060-1778574600-1778862600@www.kendallelectric.com
SUMMARY:FactoryTalk View ME & PanelView Plus Programming
DESCRIPTION:CCV204-A presented by Rockwell Automation. \nAfter completing this course\, given a computer with FactoryTalk® View Machine Edition (ME) software and a PanelView™ Plus 7 terminal\, you should be able to produce an operational application running on the terminal. \nDuring class\, you will practice the following hands-on skills: \n\nPrepare a PanelView Plus 7 terminal for operation\nCreate a new application and run it on a terminal\nCreate\, configure\, and animate graphic objects on graphic displays\nConfigure security for granting/restricting access to certain graphic displays or for rights to perform certain actions\nCreate and configure messages and alarms for alerting operators to changes in a process
URL:https://www.kendallelectric.com/event/factorytalk-view-me-panelview-plus-programming-23/
LOCATION:Kendall Electric – Tuscaloosa\, 1323 Whigham Place\, Tuscaloosa\, AL\, 35405\, United States
CATEGORIES:Rockwell Instructor-Led,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Visualization.jpg
ORGANIZER;CN="Melissa Kincaid":MAILTO:melissa.kincaid@kendallelectric.com
GEO:33.1595758;-87.5561027
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Tuscaloosa 1323 Whigham Place Tuscaloosa AL 35405 United States;X-APPLE-RADIUS=500;X-TITLE=1323 Whigham Place:geo:-87.5561027,33.1595758
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260504T130000
DTEND;TZID=America/New_York:20260508T163000
DTSTAMP:20260407T130321Z
CREATED:20260227T194056Z
LAST-MODIFIED:20260407T130321Z
UID:10006623-1777899600-1778257800@www.kendallelectric.com
SUMMARY:Studio 5000 Logix Designer Level 1: CompactLogix Fundamentals and Troubleshooting
DESCRIPTION:CCP298 presented by Rockwell Automation. \nUpon completion of this course\, you should be able to troubleshoot a previously operational CompactLogix™ system and restore normal operation. \nIn this course you will develop and practice these skills by: \n\nLearning basic concepts and terminology used with:\n\nCompactLogix system hardware\nStudio 5000 Logix Designer® application\n\n\nPracticing a systematic strategy for diagnosing and troubleshooting problems:\n\nFaulty/malfunctioning field devices\nController\, I/O\, or other hardware issues\nElectrical Noise\nConfiguration issues\n\n\nPerforming hands-on exercises\n\nAll Logix5000™ systems use the same control engine; therefore\, tasks are similar. You will see applicable references for other systems. \nMonday start time 1:00pm. Monday Only.
URL:https://www.kendallelectric.com/event/studio-5000-logix-designer-level-1-compactlogix-fundamentals-and-troubleshooting-7/
LOCATION:Kendall Electric – Bethlehem\, 2459 Baglyos Circle\, Bethlehem\, PA\, 18020\, United States
CATEGORIES:Mid-Atlantic,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Software.jpg
ORGANIZER;CN="Barbara Dever":MAILTO:barbara.dever@kendallelectric.com
GEO:40.6585138;-75.2954086
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Bethlehem 2459 Baglyos Circle Bethlehem PA 18020 United States;X-APPLE-RADIUS=500;X-TITLE=2459 Baglyos Circle:geo:-75.2954086,40.6585138
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260504T123000
DTEND;TZID=America/New_York:20260508T163000
DTSTAMP:20260427T152143Z
CREATED:20260107T155352Z
LAST-MODIFIED:20260427T152143Z
UID:10006512-1777897800-1778257800@www.kendallelectric.com
SUMMARY:Studio 5000 Logix Desinger Level 1: ControlLogix Fundamentals & Troubleshooting
DESCRIPTION:CCP299 presented by Rockwell Automation. \nUpon completion of this course\, you should be able to troubleshoot a previously operational ControlLogix® system and restore normal operation. \nYou will have the opportunity to develop and practice these skills by: \n\nLearning basic concepts and terminology used with:\n\nControlLogix system hardware\nStudio 5000 Logix Designer® application\n\n\nPracticing a systematic strategy for diagnosing and troubleshooting problems:\n\nConfiguration issues\nElectrical noise\nFaulty/malfunctioning field devices\nController I/O\, or other hardware issues\n\n\nPerforming hands-on exercises
URL:https://www.kendallelectric.com/event/studio-5000-logix-desinger-level-1-controllogix-fundamentals-troubleshooting/
LOCATION:Galloup – Wyoming\, 3838 Clay Avenue SW\, Wyoming\, MI\, 49548\, United States
CATEGORIES:Great Lakes North,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Software.jpg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:42.8938509;-85.6763234
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Galloup – Wyoming 3838 Clay Avenue SW Wyoming MI 49548 United States;X-APPLE-RADIUS=500;X-TITLE=3838 Clay Avenue SW:geo:-85.6763234,42.8938509
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260428T083000
DTEND;TZID=America/New_York:20260430T163000
DTSTAMP:20260421T195830Z
CREATED:20260107T154300Z
LAST-MODIFIED:20260421T195830Z
UID:10007034-1777365000-1777566600@www.kendallelectric.com
SUMMARY:Motion Control Fundamentals using Kinetix 5700 (CIP) Servo Drives
DESCRIPTION:CCN132 presented by Rockwell Automation.  \nUpon completion of this course\, you should be able to demonstrate fundamental motion control concepts common to all Rockwell Automation motion control systems. \nThis course is designed to provide you with an understanding of the concepts\, terminology\, functionality\, and applications of motion control. This course will also allow you to establish the foundation you need before learning the skills necessary to maintain and program motion control systems. \nThis course does not address motion control system design or specific motion control software programming. If you are seeking training in these areas\, you should enroll in the relevant Rockwell Automation training courses\, making sure you have fulfilled the prerequisites for those courses prior to enrollment.
URL:https://www.kendallelectric.com/event/motion-control-fundamentals-using-kinetix-5700-cip-servo-drives-8/
LOCATION:Kendall Electric – Fort Wayne\, 4621 Executive Boulevard\, Fort Wayne\, IN\, 46808\, United States
CATEGORIES:Great Lakes South,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Motion-Control.jpg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:41.1214083;-85.1668463
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Fort Wayne 4621 Executive Boulevard Fort Wayne IN 46808 United States;X-APPLE-RADIUS=500;X-TITLE=4621 Executive Boulevard:geo:-85.1668463,41.1214083
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260422T083000
DTEND;TZID=America/New_York:20260423T163000
DTSTAMP:20260413T123316Z
CREATED:20260107T154449Z
LAST-MODIFIED:20260413T123316Z
UID:10006511-1776846600-1776961800@www.kendallelectric.com
SUMMARY:Functional Safety for Machinery Technician Certification
DESCRIPTION:SAF-TUV0T presented by Rockwell Automation. \nThe standards regarding functional safety and relevant laws and directives demand that people and organizations performing responsible (accountable) tasks during relevant life cycle phases of a machine must achieve and prove required competencies. \nIn this training\, students will learn how the current standards dictate the selection\, assembly\, installation\, validation\, and maintenance of safety devices and components to reduce hazards from machinery and ensure the safety of people and the environment. Practical examples will demonstrate possibilities regarding machine protection. This training will also cover safety topics\, such as: redundancy\, testing\, distance calculations\, assigning required level of risk reduction as PL\, monitoring moveable guard positions\, and fault avoidance for relevant life cycle phases. \nAfter completing this course\, students should understand and be able to use ISO 12100\, IEC 60204-1 and other relevant machine functional safety standards. Students who want Functional Safety for Machinery Technician Certification (TÜV Rheinland) must meet all eligibility requirements and pass the exam scheduled at the end of the second day.
URL:https://www.kendallelectric.com/event/functional-safety-for-machinery-technician-certification-2/
LOCATION:Kendall Electric – Wyoming\, 1100 58th St SW\, Wyoming\, MI\, 49509\, United States
CATEGORIES:Great Lakes North,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Safety.jpg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:42.8579904;-85.6907904
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Wyoming 1100 58th St SW Wyoming MI 49509 United States;X-APPLE-RADIUS=500;X-TITLE=1100 58th St SW:geo:-85.6907904,42.8579904
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260420T130000
DTEND;TZID=America/New_York:20260424T163000
DTSTAMP:20260312T190141Z
CREATED:20260120T174352Z
LAST-MODIFIED:20260312T190141Z
UID:10006560-1776690000-1777048200@www.kendallelectric.com
SUMMARY:Studio 5000 Logix Designer Level 1 ControlLogix Fundamentals and Troubleshooting
DESCRIPTION:CCP299 presented by Rockwell Automation. Upon completion of this course\, you should be able to troubleshoot a previously operational ControlLogix® system and restore normal operation. \nYou will have the opportunity to develop and practice these skills by:\n• Learning basic concepts and terminology used with:\n– ControlLogix system hardware\n– Studio 5000 Logix Designer® application\n• Practicing a systematic strategy for diagnosing and troubleshooting problems:\n– Configuration issues\n– Electrical noise\n– Faulty/malfunctioning field devices\n– Controller I/O\, or other hardware issues\n• Performing hands-on exercises
URL:https://www.kendallelectric.com/event/studio-5000-logix-designer-level-1-controllogix-fundamentals-and-troubleshooting-45/
LOCATION:Kendall Electric – Conshohocken\, 15 Colwell Lane\, Conshohocken\, PA\, 19428\, United States
CATEGORIES:Mid-Atlantic,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Software.jpg
ORGANIZER;CN="Barbara Dever":MAILTO:barbara.dever@kendallelectric.com
GEO:40.0798115;-75.3104239
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Conshohocken 15 Colwell Lane Conshohocken PA 19428 United States;X-APPLE-RADIUS=500;X-TITLE=15 Colwell Lane:geo:-75.3104239,40.0798115
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260416T083000
DTEND;TZID=America/New_York:20260417T163000
DTSTAMP:20260406T111411Z
CREATED:20260107T154411Z
LAST-MODIFIED:20260406T111411Z
UID:10006509-1776328200-1776443400@www.kendallelectric.com
SUMMARY:Studio 5000 Logix Designer Level 2: Basic Ladder Logic Programming
DESCRIPTION:CCP151 presented by Rockwell Automation. \nAfter completing this course\, you should be able to program basic ladder logic instructions for Logix5000™ controllers. This is a skill-building course that provides you with the resources and hands-on practice required to complete this objective. \nYou will have an opportunity to use the Studio 5000 Logix Designer® application to perform basic software tasks to meet the requirements of a given functional specification. In addition\, you will set up a sequencer to run equipment through a predefined procedure and separate production procedure from equipment control.
URL:https://www.kendallelectric.com/event/studio-5000-logix-designer-level-2-basic-ladder-logic-programming-51/
LOCATION:Kendall Electric – Portage\, 5101 South Sprinkle Road\, Portage\, MI\, 49002\, United States
CATEGORIES:Great Lakes South,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Software.jpg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:42.2419234;-85.5300917
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Portage 5101 South Sprinkle Road Portage MI 49002 United States;X-APPLE-RADIUS=500;X-TITLE=5101 South Sprinkle Road:geo:-85.5300917,42.2419234
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260414T083000
DTEND;TZID=America/New_York:20260415T163000
DTSTAMP:20260406T111104Z
CREATED:20260107T154337Z
LAST-MODIFIED:20260406T111104Z
UID:10006507-1776155400-1776270600@www.kendallelectric.com
SUMMARY:Studio 5000 Logix Designer Level 1: ControlLogix System Fundamentals
DESCRIPTION:CCP146 presented by Rockwell Automation. \nAfter completing this course\, you should be able to perform basic ControlLogix® and Studio 5000 Logix Designer® tasks\, such as: \n\nCreating and configuring a project\nCommunicating with a controller.\n\nThe course will assist you in developing and building a solid foundation with a fundamental knowledge of ControlLogix and other Logix5000™ systems. You will be introduced to basic Logix5000 concepts and terminology\, and you will be exposed to Logix5000 system hardware\, including hands-on experience with the ControlLogix platform.
URL:https://www.kendallelectric.com/event/studio-5000-logix-designer-level-1-controllogix-system-fundamentals-49/
LOCATION:Kendall Electric – Portage\, 5101 South Sprinkle Road\, Portage\, MI\, 49002\, United States
CATEGORIES:Great Lakes South,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Software.jpg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:42.2419234;-85.5300917
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Portage 5101 South Sprinkle Road Portage MI 49002 United States;X-APPLE-RADIUS=500;X-TITLE=5101 South Sprinkle Road:geo:-85.5300917,42.2419234
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260323T083000
DTEND;TZID=America/Chicago:20260324T163000
DTSTAMP:20260120T142245Z
CREATED:20250710T202329Z
LAST-MODIFIED:20260120T142245Z
UID:10006940-1774254600-1774369800@www.kendallelectric.com
SUMMARY:Essentials of Industrial Ethernet Networks for an OT Professional
DESCRIPTION:CCP182 presented by Rockwell Automation. \nAfter completing this course\, you should be able to: \n\nDemonstrate understanding of basic Ethernet networking skills\, terminology\, and concepts\nApply these skills when performing advanced network specification\, configuration\, and troubleshooting tasks\n\nIn this course\, you will learn how to verify communications between devices\, recognize data transmission types\, and differentiate between OSI Model Layer 2 and Layer 3 switching functions. You will also identify the routing process\, monitor a switch using Device Manager and CLI commands\, and work with IOS configuration files. \nThis course prepares you to more clearly understand key IT terms and concepts for communicating with other professionals on Connected Enterprise projects.
URL:https://www.kendallelectric.com/event/essentials-of-industrial-ethernet-networks-for-an-ot-professional-10/
LOCATION:Kendall Electric – Jackson\, 25 American Drive\, Jackson\, TN\, 38301\, United States
CATEGORIES:Rockwell Instructor-Led,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Networking.jpg
ORGANIZER;CN="Melissa Kincaid":MAILTO:melissa.kincaid@kendallelectric.com
GEO:35.6327873;-88.7853842
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Jackson 25 American Drive Jackson TN 38301 United States;X-APPLE-RADIUS=500;X-TITLE=25 American Drive:geo:-88.7853842,35.6327873
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260317T083000
DTEND;TZID=America/New_York:20260319T163000
DTSTAMP:20260728T225111Z
CREATED:20250715T194450Z
LAST-MODIFIED:20260728T225111Z
UID:10006953-1773736200-1773937800@www.kendallelectric.com
SUMMARY:Ethernet/IP Configuration and Troubleshooting
DESCRIPTION:CCP183 presented by Rockwell Automation. \nThis course should prepare you to effectively: \n\nConfigure a Stratix® switch (5700\, 8000\, and/or 8300) to meet a variety of network requirements\nAssign IP addresses to devices on an EtherNet/IP network using rotary switches and a variety of software\nMonitor switch performance and status\nDiagnose and resolve issues with switches and devices on a network\n\nDuring switch configuration\, you will have an opportunity to: \n\nConfigure a switch using both the Device Manager Web Interface and Studio 5000 Logix Designer® software\nSet up one-to-one IP address translation (NAT) for segmenting machine-level network devices from the plant network\nSecure and limit access to a switch\n\nOnce the EtherNet/IP network is up and running\, you will monitor diagnostic information using web-based technologies and modify a web server module’s data views and tag values. You will resolve issues with communication between devices on a network. You will troubleshoot an EtherNet/ IP network’s media and components (including the Stratix 5700 switch); run diagnostic tests to resolve system and port issues; and perform common functions such as resetting the switch.
URL:https://www.kendallelectric.com/event/ethernet-ip-configuration-and-troubleshooting-19/
LOCATION:Galloup – Wyoming\, 3838 Clay Avenue SW\, Wyoming\, MI\, 49548\, United States
CATEGORIES:Great Lakes North,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Networking.jpg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:42.8938509;-85.6763234
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Galloup – Wyoming 3838 Clay Avenue SW Wyoming MI 49548 United States;X-APPLE-RADIUS=500;X-TITLE=3838 Clay Avenue SW:geo:-85.6763234,42.8938509
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260310T083000
DTEND;TZID=America/New_York:20260312T163000
DTSTAMP:20260102T165443Z
CREATED:20250715T194025Z
LAST-MODIFIED:20260102T165443Z
UID:10006952-1773131400-1773333000@www.kendallelectric.com
SUMMARY:GuardLogix Application Development and Troubleshooting
DESCRIPTION:SAF-LOG104 presented by Rockwell Automation. \nUpon completion of this course\, you will be able to create a Studio 5000 Logix Designer® project for a GuardLogix® system and troubleshoot a previously operational GuardLogix system. \nYou will have the opportunity to develop and practice these skills by: \n\nLearning GuardLogix concepts and terminology\nCreating and configuring a GuardLogix project:\nAdding and configuring CompactBlock™ Guard I/O™ POINT Guard I/O™ safety modules:\nGenerating Safety Signatures and locking/unlocking a GuardLogix controller\nProgramming safety instructions\nTroubleshooting a GuardLogix project
URL:https://www.kendallelectric.com/event/guardlogix-application-development-and-troubleshooting-18/
LOCATION:Galloup – Wyoming\, 3838 Clay Avenue SW\, Wyoming\, MI\, 49548\, United States
CATEGORIES:Great Lakes North,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Safety.jpg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:42.8938509;-85.6763234
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Galloup – Wyoming 3838 Clay Avenue SW Wyoming MI 49548 United States;X-APPLE-RADIUS=500;X-TITLE=3838 Clay Avenue SW:geo:-85.6763234,42.8938509
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260309T123000
DTEND;TZID=America/New_York:20260313T163000
DTSTAMP:20260102T170017Z
CREATED:20250710T201813Z
LAST-MODIFIED:20260102T170017Z
UID:10006937-1773059400-1773419400@www.kendallelectric.com
SUMMARY:Studio 5000 Logix Designer Level 1: ControlLogix Fundamentals and Troubleshooting
DESCRIPTION:CCP299 presented by Rockwell Automation. \nUpon completion of this course\, you should be able to troubleshoot a previously operational ControlLogix® system and restore normal operation. \nYou will have the opportunity to develop and practice these skills by: \n\nLearning basic concepts and terminology used with:\n\nControlLogix system hardware\nStudio 5000 Logix Designer® application\n\n\nPracticing a systematic strategy for diagnosing and troubleshooting problems:\n\nConfiguration issues\nElectrical noise\nFaulty/malfunctioning field devices\nController I/O\, or other hardware issues\n\n\nPerforming hands-on exercises
URL:https://www.kendallelectric.com/event/studio-5000-logix-designer-level-1-controllogix-fundamentals-and-troubleshooting-37/
LOCATION:Kendall Electric – Chattanooga\, 6233 Airpark Drive\, Chattanooga\, TN\, 37421\, United States
CATEGORIES:Rockwell Instructor-Led,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Software.jpg
ORGANIZER;CN="Melissa Kincaid":MAILTO:melissa.kincaid@kendallelectric.com
GEO:35.0354726;-85.1861614
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Chattanooga 6233 Airpark Drive Chattanooga TN 37421 United States;X-APPLE-RADIUS=500;X-TITLE=6233 Airpark Drive:geo:-85.1861614,35.0354726
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260303T083000
DTEND;TZID=America/New_York:20260306T163000
DTSTAMP:20260102T165455Z
CREATED:20250715T193720Z
LAST-MODIFIED:20260102T165455Z
UID:10006951-1772526600-1772814600@www.kendallelectric.com
SUMMARY:Industrial Electrical Controls Fundamentals
DESCRIPTION:MFG213 presented by Rockwell Automation. \nThis course is designed to provide knowledge and skills required to install\, maintain and troubleshoot machine controls. \nAt the completion of this course\, you will be able to: \n\nDefine the safety considerations that must be observed when installing\, checking or locking out electrical equipment\nDefine uses and functions of input and output devices\, relays\, and motors\nDemonstrate the reading of schematic diagrams and logic\nDefine an open and short condition and perform voltage and current measurements\nDemonstrate the proper use of the following test equipment in lab to measure voltage\, current\, resistance and continuity: VOM\, DVM\, Multi-meters\, continuity tester and amp probe\nApproximate secondary voltage\, secondary current and primary current of a transformer when given its turns ratio\, primary voltage and secondary load\nIdentify the proper wiring configurations of a control transformer’s primary current for 240V and 480V operation\nApproximate a transformer’s maximum primary current for 480V operation\, using the nameplate information
URL:https://www.kendallelectric.com/event/industrial-electrical-controls-fundamentals-19/
LOCATION:Kendall Electric – Portage\, 5101 South Sprinkle Road\, Portage\, MI\, 49002\, United States
CATEGORIES:Great Lakes South,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Networking.jpg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:42.2419234;-85.5300917
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Portage 5101 South Sprinkle Road Portage MI 49002 United States;X-APPLE-RADIUS=500;X-TITLE=5101 South Sprinkle Road:geo:-85.5300917,42.2419234
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260226T083000
DTEND;TZID=America/New_York:20260227T163000
DTSTAMP:20260102T165508Z
CREATED:20250715T193311Z
LAST-MODIFIED:20260102T165508Z
UID:10006950-1772094600-1772209800@www.kendallelectric.com
SUMMARY:Studio 5000 Logix Designer Level 2: Basic Ladder Logic Programming
DESCRIPTION:CCP151 presented by Rockwell Automation. \nAfter completing this course\, you should be able to program basic ladder logic instructions for Logix5000™ controllers. \nThis is a skill-building course that provides you with the resources and hands-on practice required to complete this objective. You will have an opportunity to use the Studio 5000 Logix Designer® application to perform basic software tasks to meet the requirements of a given functional specification. In addition\, you will set up a sequencer to run equipment through a predefined procedure and separate production procedure from equipment control.
URL:https://www.kendallelectric.com/event/studio-5000-logix-designer-level-2-basic-ladder-logic-programming-48/
LOCATION:Kendall Electric – Midland\, 3240 Schuette Road\, Midland\, MI\, 48642\, United States
CATEGORIES:Great Lakes North,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Software.jpg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:43.5985761;-84.1884677
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Midland 3240 Schuette Road Midland MI 48642 United States;X-APPLE-RADIUS=500;X-TITLE=3240 Schuette Road:geo:-84.1884677,43.5985761
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260224T083000
DTEND;TZID=America/New_York:20260225T163000
DTSTAMP:20260102T165519Z
CREATED:20250715T192951Z
LAST-MODIFIED:20260102T165519Z
UID:10006949-1771921800-1772037000@www.kendallelectric.com
SUMMARY:Studio 5000 Logix Designer Level 1: ControlLogix System Fundamentals
DESCRIPTION:CCP146 presented by Rockwell Automation. \nAfter completing this course\, you should be able to perform basic ControlLogix® and Studio 5000 Logix Designer® tasks\, such as: \n\nCreating and configuring a project\nCommunicating with a controller\n\nThe course will assist you in developing and building a solid foundation with a fundamental knowledge of ControlLogix and other Logix5000™ systems. You will be introduced to basic Logix5000 concepts and terminology\, and you will be exposed to Logix5000 system hardware\, including hands-on experience with the ControlLogix platform.
URL:https://www.kendallelectric.com/event/studio-5000-logix-designer-level-1-controllogix-system-fundamentals-47/
LOCATION:Kendall Electric – Midland\, 3240 Schuette Road\, Midland\, MI\, 48642\, United States
CATEGORIES:Great Lakes North,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Software.jpg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:43.5985761;-84.1884677
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Midland 3240 Schuette Road Midland MI 48642 United States;X-APPLE-RADIUS=500;X-TITLE=3240 Schuette Road:geo:-84.1884677,43.5985761
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260223T083000
DTEND;TZID=America/New_York:20260227T163000
DTSTAMP:20260102T170550Z
CREATED:20250701T171750Z
LAST-MODIFIED:20260102T170550Z
UID:10006924-1771835400-1772209800@www.kendallelectric.com
SUMMARY:Studio 5000 Logix Designer Level 1: CompactLogix Fundamentals and Troubleshooting
DESCRIPTION:CCP298 presented by Rockwell Automation. \nUpon completion of this course\, you should be able to troubleshoot a previously operational CompactLogix™ system and restore normal operation. \nIn this course you will develop and practice these skills by: \n\nLearning basic concepts and terminology used with:\n\nCompactLogix system hardware\nStudio 5000 Logix Designer® application\n\n\nPracticing a systematic strategy for diagnosing and troubleshooting problems:\n\nFaulty/malfunctioning field devices\nController\, I/O\, or other hardware issues\nElectrical Noise\nConfiguration issues\n\n\nPerforming hands-on exercises\n\nAll Logix5000™ systems use the same control engine; therefore\, tasks are similar. You will see applicable references for other systems. \nMonday start time 1:00pm. Monday Only.
URL:https://www.kendallelectric.com/event/studio-5000-logix-designer-level-1-compactlogix-fundamentals-and-troubleshooting-6/
LOCATION:Kendall Electric – Bethlehem\, 2459 Baglyos Circle\, Bethlehem\, PA\, 18020\, United States
CATEGORIES:Mid-Atlantic,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Software.jpg
ORGANIZER;CN="Barbara Dever":MAILTO:barbara.dever@kendallelectric.com
GEO:40.6585138;-75.2954086
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Bethlehem 2459 Baglyos Circle Bethlehem PA 18020 United States;X-APPLE-RADIUS=500;X-TITLE=2459 Baglyos Circle:geo:-75.2954086,40.6585138
END:VEVENT
END:VCALENDAR