BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//Kendall Electric - ECPv6.17.1//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-ORIGINAL-URL:https://www.kendallelectric.com
X-WR-CALDESC:Events for Kendall Electric
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:America/New_York
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20230312T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20231105T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20240310T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20241103T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20250309T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20251102T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20260308T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20261101T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20270314T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20271107T060000
END:STANDARD
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:UTC
BEGIN:STANDARD
TZOFFSETFROM:+0000
TZOFFSETTO:+0000
TZNAME:UTC
DTSTART:20220101T000000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260422T083000
DTEND;TZID=America/New_York:20260423T163000
DTSTAMP:20260413T123316Z
CREATED:20260107T154449Z
LAST-MODIFIED:20260413T123316Z
UID:10006511-1776846600-1776961800@www.kendallelectric.com
SUMMARY:Functional Safety for Machinery Technician Certification
DESCRIPTION:SAF-TUV0T presented by Rockwell Automation. \nThe standards regarding functional safety and relevant laws and directives demand that people and organizations performing responsible (accountable) tasks during relevant life cycle phases of a machine must achieve and prove required competencies. \nIn this training\, students will learn how the current standards dictate the selection\, assembly\, installation\, validation\, and maintenance of safety devices and components to reduce hazards from machinery and ensure the safety of people and the environment. Practical examples will demonstrate possibilities regarding machine protection. This training will also cover safety topics\, such as: redundancy\, testing\, distance calculations\, assigning required level of risk reduction as PL\, monitoring moveable guard positions\, and fault avoidance for relevant life cycle phases. \nAfter completing this course\, students should understand and be able to use ISO 12100\, IEC 60204-1 and other relevant machine functional safety standards. Students who want Functional Safety for Machinery Technician Certification (TÜV Rheinland) must meet all eligibility requirements and pass the exam scheduled at the end of the second day.
URL:https://www.kendallelectric.com/event/functional-safety-for-machinery-technician-certification-2/
LOCATION:Kendall Electric – Wyoming\, 1100 58th St SW\, Wyoming\, MI\, 49509\, United States
CATEGORIES:Great Lakes North,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Safety.jpg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:42.8579904;-85.6907904
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Wyoming 1100 58th St SW Wyoming MI 49509 United States;X-APPLE-RADIUS=500;X-TITLE=1100 58th St SW:geo:-85.6907904,42.8579904
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260414T080000
DTEND;TZID=America/New_York:20260417T163000
DTSTAMP:20260413T112013Z
CREATED:20260129T151920Z
LAST-MODIFIED:20260413T112013Z
UID:10007091-1776153600-1776443400@www.kendallelectric.com
SUMMARY:PLC Wiring & Troubleshooting
DESCRIPTION:Learn how to talk through and troubleshoot PLC ladder logic using Logix5000 software in order to locate a “real” faulty input or output device\, replace it\, and get the process back up and running. It’s all about troubleshooting! \nEach attendee will actually wire the input and output (I/O) field devices to the PLC using their own PLC Trainer! \nSession Topics: \n\nEthernet communications set up using RSLinx\nDiscuss the BootP utility using an “out of the box” controller to set the IP address and configuration in RSLinx\nEthernet/IP driver: explain “RSWho views” and RSLinx configuration\nToggling and forcing real and simulated input and outputs\nTimers\, Counters\, One-Shot\nCompare blocks\, First-Scan\, Mov/Clr blocks\nMath blocks\, Set Bit Zero/Negative\nJump\, Jump to Subroutine\, Master Control Reset\nOne/two Dimension arrays\, Fill File\, Copy File\, Average File\nBit-Shift Right/Left\, First-In-First-Out\, Load/Unload\nLast-In-First-Out\, Load/Unload\, Masked Move\nSequencer Output using the Array\, Mask\, and Output Tables\nIndirect Addressing\, Add-On Instructions
URL:https://www.kendallelectric.com/event/plc-wiring-troubleshooting-22/
LOCATION:Kendall Electric – Wyoming\, 1100 58th St SW\, Wyoming\, MI\, 49509\, United States
CATEGORIES:Great Lakes North,Kendall Connected Training
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2026/02/PLC-Trainer-1-scaled.jpg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:42.8579904;-85.6907904
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Wyoming 1100 58th St SW Wyoming MI 49509 United States;X-APPLE-RADIUS=500;X-TITLE=1100 58th St SW:geo:-85.6907904,42.8579904
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260217T083000
DTEND;TZID=America/New_York:20260220T163000
DTSTAMP:20260102T165533Z
CREATED:20250715T192508Z
LAST-MODIFIED:20260102T165533Z
UID:10006948-1771317000-1771605000@www.kendallelectric.com
SUMMARY:FactoryTalk View ME & PanelView Plus Programming
DESCRIPTION:CCV204-A presented by Rockwell Automation. \nAfter completing this course\, given a computer with FactoryTalk® View Machine Edition (ME) software and a PanelView™ Plus 7 terminal\, you should be able to produce an operational application running on the terminal. \nDuring class\, you will practice the following hands-on skills: \n\nPrepare a PanelView Plus 7 terminal for operation\nCreate a new application and run it on a terminal\nCreate\, configure\, and animate graphic objects on graphic displays\nConfigure security for granting/restricting access to certain graphic displays or for rights to perform certain actions\nCreate and configure messages and alarms for alerting operators to changes in a process
URL:https://www.kendallelectric.com/event/factorytalk-view-me-panelview-plus-programming-21/
LOCATION:Kendall Electric – Wyoming\, 1100 58th St SW\, Wyoming\, MI\, 49509\, United States
CATEGORIES:Great Lakes North,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Visualization.jpg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:42.8579904;-85.6907904
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Wyoming 1100 58th St SW Wyoming MI 49509 United States;X-APPLE-RADIUS=500;X-TITLE=1100 58th St SW:geo:-85.6907904,42.8579904
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20251208T083000
DTEND;TZID=America/New_York:20251212T163000
DTSTAMP:20251105T200652Z
CREATED:20251105T195052Z
LAST-MODIFIED:20251105T200652Z
UID:10007011-1765182600-1765557000@www.kendallelectric.com
SUMMARY:Basic Electrical Concepts
DESCRIPTION:EMS-100 presented by Rockwell Automation. This course provides information on the basic concepts of direct current (DC) electricity and magnetism\, including electrostatics\, basic circuit concepts\, and measurement of electrical quantities and associated numerical concepts\, Ohm’s Law\, practical circuits\, electromagnetism\, and electrical measurements. There are hands-on exercises for device operation and simple circuit construction and analysis. \nUpon completion of this course\, you should be able to:\n• Identify the types of electrical energy\n• Discuss the composition of the atom and its relation to electrical charge\n• Explain the characteristics of current\, voltage\, and resistance\n• Explain Kirchhoff’s Current Law and Kirchhoff’s Voltage Law\n• Calculate equivalent resistance of series and parallel resistive circuits\n• Calculate DC circuit parameters using Ohm’s Law\, Kirchhoff’s Current Law\, and Kirchhoff’s Voltage Law\n• Describe the characteristics of capacitors and capacitance\n• Describe the characteristics of inductors and inductance\n• Describe the construction and operation of a simple AC generator\n• Define inductive reactance\n• Calculate the inductive reactance of a simple AC circuit\n• Define capacitive reactance\n• Calculate the capacitive reactance of a simple AC circuit\n• Define impedance\n• Describe the relationship between apparent\, true\, and reactive power\n• Define power factor as it relates to true power and apparent power
URL:https://www.kendallelectric.com/event/basic-electrical-concepts-4/
LOCATION:Kendall Electric – Wyoming\, 1100 58th St SW\, Wyoming\, MI\, 49509\, United States
CATEGORIES:Great Lakes North,Great Lakes South,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Drives.jpg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:42.8579904;-85.6907904
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Wyoming 1100 58th St SW Wyoming MI 49509 United States;X-APPLE-RADIUS=500;X-TITLE=1100 58th St SW:geo:-85.6907904,42.8579904
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250408T080000
DTEND;TZID=America/New_York:20250411T163000
DTSTAMP:20250224T211253Z
CREATED:20250212T210015Z
LAST-MODIFIED:20250224T211253Z
UID:10006345-1744099200-1744389000@www.kendallelectric.com
SUMMARY:PLC Wiring and Troubleshooting
DESCRIPTION:Learn how to talk through and troubleshoot PLC ladder logic using Logix5000 software in order to locate a “real” faulty input or output device\, replace it\, and get the process back up and running.\nIt’s all about troubleshooting!\nEach attendee will actually wire the input and output (I/O) field devices to the PLC using their own PLC Trainer! \nSESSION TOPICS \n\nEthernet communications set up using RSLinx\nDiscuss the BootP utility using an “out of the box” controller to set the IP address and configuration in RSLinx\nEthernet/IP driver: explain “RSWho views” and RSLinx configuration\nToggling and forcing real and simulated inputs and outputs\nTimers\, Counters\, One-Shot\nCompare blocks\, First-Scan\, Mov/Clr blocks\nMath blocks\, Set Bit Zero/Negative\nJump\, Jump to Subroutine\, Master Control Reset\nOne/two Dimension arrays\, Fill File\, Copy File\, Average File\nBit-Shift Right/Left\, First-In-First-Out\, Load/Unload\nLast-In-First-Out\, Load/Unload\, Masked Move\nSequencer Output using the Array\, Mask\, and Output Tables\nIndirect Addressing\, Add-On Instructions
URL:https://www.kendallelectric.com/event/plc-wiring-and-troubleshooting-7/
LOCATION:Kendall Electric – Wyoming\, 1100 58th St SW\, Wyoming\, MI\, 49509\, United States
CATEGORIES:Great Lakes North,Kendall Connected Training
ATTACH;FMTTYPE=image/gif:https://www.kendallelectric.com/wp-content/uploads/2023/09/Training_KCT_PLC.gif
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:42.8579904;-85.6907904
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Wyoming 1100 58th St SW Wyoming MI 49509 United States;X-APPLE-RADIUS=500;X-TITLE=1100 58th St SW:geo:-85.6907904,42.8579904
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250305T090000
DTEND;TZID=America/New_York:20250307T163000
DTSTAMP:20240917T193017Z
CREATED:20240829T194643Z
LAST-MODIFIED:20240917T193017Z
UID:10006684-1741165200-1741365000@www.kendallelectric.com
SUMMARY:Fundamentals of PowerFlex 525 VFD Wiring & Commissioning
DESCRIPTION:Learn how to install\, test\, start-up\, and troubleshoot basic PowerFlex 525 VFD applications.\nLearn how to wire\, program\, and operate Variable Frequency Drives during this three-day course that covers a combination of instructor-led discussions\, demonstrations\, and hands-on labs. \nUsing a VFD workstation\, HMI module and hand-held VFD test module\, students will leave with a better understanding of various control configurations and applications. Students will also test and troubleshoot VFDs using Fluke test and measurement equipment. \nSESSION TOPICS: \n\nVFD Power and Control Fundamentals\nTesting VFD Power Components\nAC Motor Fundamentals and Measurements\nInstallation Considerations\nPower and Control Wiring Configurations\nVFD Application Techniques and Parameter Adjustments\nEthernet Communications Configuration\nVoltage and Current Measurements using Fluke VOM® and Clamp Ammeter
URL:https://www.kendallelectric.com/event/fundamentals-of-powerflex-525-vfd-wiring-commissioning-2/
LOCATION:Kendall Electric – Wyoming\, 1100 58th St SW\, Wyoming\, MI\, 49509\, United States
CATEGORIES:Great Lakes North,Kendall Connected Training
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2024/08/Workstation_PowerFlex-525-scaled-nHrM9t.tmp_.jpg
ORGANIZER;CN="Camie White":MAILTO:camie.white@kendallelectric.com
GEO:42.8579904;-85.6907904
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Wyoming 1100 58th St SW Wyoming MI 49509 United States;X-APPLE-RADIUS=500;X-TITLE=1100 58th St SW:geo:-85.6907904,42.8579904
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250304T090000
DTEND;TZID=America/New_York:20250304T163000
DTSTAMP:20240830T142634Z
CREATED:20240829T194616Z
LAST-MODIFIED:20240830T142634Z
UID:10006658-1741078800-1741105800@www.kendallelectric.com
SUMMARY:Rockwell Automation VFDs: Backup\, Replace\, Restore\, and Redeploy
DESCRIPTION:Get hands-on experience returning failed automation equipment back to service.\nDesigned specifically for maintenance personnel and electricians\, this one-day course gives students the opportunity to work with a fully functional automated system that contains all of the target VFDs\, PanelView terminals\, PLCs\, Servos\, & industrial switches. Students will systematically one-by-one backup\, replace\, restore\, and return to service each device using detailed step-by step and pictorially illustrated labs. \nLab manuals included in this course can be used for future reference when replacing equipment on the plant floor. \nPRODUCTS COVERED:\nVariable Frequency Drives (VFDs)\nPowerFlex 525\, PowerFlex 755\, PowerFlex 527 \nKinetix Servos\nKinetix 5300\, Kinetix 5500
URL:https://www.kendallelectric.com/event/rockwell-automation-vfds-backup-replace-restore-and-redeploy-5/
LOCATION:Kendall Electric – Wyoming\, 1100 58th St SW\, Wyoming\, MI\, 49509\, United States
CATEGORIES:Great Lakes North,Kendall Connected Training
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2024/08/VFD-Backup-no-blue.jpg
ORGANIZER;CN="Camie White":MAILTO:camie.white@kendallelectric.com
GEO:42.8579904;-85.6907904
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Wyoming 1100 58th St SW Wyoming MI 49509 United States;X-APPLE-RADIUS=500;X-TITLE=1100 58th St SW:geo:-85.6907904,42.8579904
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250303T090000
DTEND;TZID=America/New_York:20250303T163000
DTSTAMP:20250204T155406Z
CREATED:20240829T194637Z
LAST-MODIFIED:20250204T155406Z
UID:10006673-1740992400-1741019400@www.kendallelectric.com
SUMMARY:Rockwell Automation HMIs: Backup\, Replace\, Restore\, and Redeploy
DESCRIPTION:Get hands-on experience returning failed automation equipment back to service.\nDesigned specifically for maintenance personnel and electricians\, this one-day course gives students the opportunity to work with a fully functional automated system that contains all of the target VFDs\, PanelView terminals\, PLCs\, Servos\, & industrial switches. Students will systematically one-by-one backup\, replace\, restore\, and return to service each device using detailed step-by step and pictorially illustrated labs. \nLab manuals included in this course can be used for future reference when replacing equipment on the plant floor. \nPRODUCTS COVERED: \nPanelView Terminals  \n\nPanelView Plus 7 Terminal\nPanelView 5000 Terminal\nMicro800 PanelView Terminal
URL:https://www.kendallelectric.com/event/rockwell-automation-hmis-backup-replace-restore-and-redeploy-10/
LOCATION:Kendall Electric – Wyoming\, 1100 58th St SW\, Wyoming\, MI\, 49509\, United States
CATEGORIES:Great Lakes North,Kendall Connected Training
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2024/08/VFD-Backup.jpg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:42.8579904;-85.6907904
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Wyoming 1100 58th St SW Wyoming MI 49509 United States;X-APPLE-RADIUS=500;X-TITLE=1100 58th St SW:geo:-85.6907904,42.8579904
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250227T083000
DTEND;TZID=America/New_York:20250228T163000
DTSTAMP:20240719T193350Z
CREATED:20240719T193350Z
LAST-MODIFIED:20240719T193350Z
UID:10006579-1740645000-1740760200@www.kendallelectric.com
SUMMARY:Studio 5000 Logix Designer Level 2: Basic Ladder Logic Programming
DESCRIPTION:CCP151 presented by Rockwell Automation. After completing this course\, you should be able to program basic ladder logic instructions for Logix5000™ controllers. This is a skill-building course that provides you with the resources and hands-on practice required to complete this objective. You will have an opportunity to use the Studio 5000 Logix Designer® application to perform basic software tasks to meet the requirements of a given functional specification. In addition\, you will set up a sequencer to run equipment through a predefined procedure and separate production procedure from equipment control.
URL:https://www.kendallelectric.com/event/studio-5000-logix-designer-level-2-basic-ladder-logic-programming-28/
LOCATION:Kendall Electric – Wyoming\, 1100 58th St SW\, Wyoming\, MI\, 49509\, United States
CATEGORIES:Great Lakes North,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Software.jpg
ORGANIZER;CN="Camie White":MAILTO:camie.white@kendallelectric.com
GEO:42.8579904;-85.6907904
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Wyoming 1100 58th St SW Wyoming MI 49509 United States;X-APPLE-RADIUS=500;X-TITLE=1100 58th St SW:geo:-85.6907904,42.8579904
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250225T083000
DTEND;TZID=America/New_York:20250226T163000
DTSTAMP:20240719T193243Z
CREATED:20240719T193243Z
LAST-MODIFIED:20240719T193243Z
UID:10006577-1740472200-1740587400@www.kendallelectric.com
SUMMARY:Studio 5000 Logix Designer Level 1: ControlLogix System Fundamentals
DESCRIPTION:CCP146 presented by Rockwell Automation. After completing this course\, you should be able to perform basic ControlLogix® and Studio 5000 Logix Designer® tasks\, such as:\n• Creating and configuring a project\n• Communicating with a controller. \nThe course will assist you in developing and building a solid foundation with a fundamental knowledge of ControlLogix and other Logix5000™ systems. You will be introduced to basic Logix5000 concepts and terminology\, and you will be exposed to Logix5000 system hardware\, including hands-on experience with the ControlLogix platform.
URL:https://www.kendallelectric.com/event/studio-5000-logix-designer-level-1-controllogix-system-fundamentals-28/
LOCATION:Kendall Electric – Wyoming\, 1100 58th St SW\, Wyoming\, MI\, 49509\, United States
CATEGORIES:Great Lakes North,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Software.jpg
ORGANIZER;CN="Camie White":MAILTO:camie.white@kendallelectric.com
GEO:42.8579904;-85.6907904
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Wyoming 1100 58th St SW Wyoming MI 49509 United States;X-APPLE-RADIUS=500;X-TITLE=1100 58th St SW:geo:-85.6907904,42.8579904
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250128T083000
DTEND;TZID=America/New_York:20250130T163000
DTSTAMP:20241107T141607Z
CREATED:20240719T191031Z
LAST-MODIFIED:20241107T141607Z
UID:10006144-1738053000-1738254600@www.kendallelectric.com
SUMMARY:EtherNet/IP Configuration and Troubleshooting
DESCRIPTION:CCP183 presented by Rockwell Automation. This course should prepare you to effectively:\n• Configure a Stratix® switch (5700\, 8000\, and/or 8300) to meet a variety of network requirements\n• Assign IP addresses to devices on an EtherNet/IP network using rotary switches and a variety of software\n• Monitor switch performance and status\n• Diagnose and resolve issues with switches and devices on a network \nDuring switch configuration\, you will have an opportunity to:\n• Configure a switch using both the Device Manager Web Interface and Studio 5000 Logix Designer® software\n• Set up one-to-one IP address translation (NAT) for segmenting machine-level network devices from the plant network\n• Secure and limit access to a switch \nOnce the EtherNet/IP network is up and running\, you will monitor diagnostic information using web-based technologies and modify a web server module’s data views and tag values. You will resolve issues with communication between devices on a network. You will troubleshoot an EtherNet/ IP network’s media and components (including the Stratix 5700 switch); run diagnostic tests to resolve system and port issues; and perform common functions such as resetting the switch.
URL:https://www.kendallelectric.com/event/ethernet-ip-configuration-and-troubleshooting-12/
LOCATION:Kendall Electric – Wyoming\, 1100 58th St SW\, Wyoming\, MI\, 49509\, United States
CATEGORIES:Great Lakes North,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Networking.jpg
ORGANIZER;CN="Camie White":MAILTO:camie.white@kendallelectric.com
GEO:42.8579904;-85.6907904
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Wyoming 1100 58th St SW Wyoming MI 49509 United States;X-APPLE-RADIUS=500;X-TITLE=1100 58th St SW:geo:-85.6907904,42.8579904
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240917T083000
DTEND;TZID=America/New_York:20240920T163000
DTSTAMP:20240730T114335Z
CREATED:20240131T153328Z
LAST-MODIFIED:20240730T114335Z
UID:10006202-1726561800-1726849800@www.kendallelectric.com
SUMMARY:Studio 5000 Logix Designer Level 3: ControlLogix Project Development
DESCRIPTION:CCP143 presented by Rockwell Automation. Upon completion of this course\, given a functional specification for a Logix5000™ application\, you should be able to develop a project to meet the specification requirements. \nThis course covers tasks common to the following hardware\, which all use the Logix5000 control engine:\n• ControlLogix® controllers\n• CompactLogix™ controllers\n• SoftLogix™ controllers \nThis course builds upon your knowledge of common controller terms and operation and your experience with basic ladder logic programming. You can gain a deeper understanding of project development tasks that are common to all Logix5000 controllers. Such tasks include organizing tasks and routines\, organizing controller data\, configuring modules\, and sharing data. You will also use producer/consumer technology for multicasting to input and output devices\, sharing data between controllers\, and controlling remote I/O.
URL:https://www.kendallelectric.com/event/studio-5000-loigx-designer-level-3-controllogix-project-development-2/
LOCATION:Kendall Electric – Wyoming\, 1100 58th St SW\, Wyoming\, MI\, 49509\, United States
CATEGORIES:Great Lakes North,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Software.jpg
ORGANIZER;CN="Camie White":MAILTO:camie.white@kendallelectric.com
GEO:42.8579904;-85.6907904
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Wyoming 1100 58th St SW Wyoming MI 49509 United States;X-APPLE-RADIUS=500;X-TITLE=1100 58th St SW:geo:-85.6907904,42.8579904
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240820T083000
DTEND;TZID=America/New_York:20240822T163000
DTSTAMP:20240603T143341Z
CREATED:20240130T213728Z
LAST-MODIFIED:20240603T143341Z
UID:10006190-1724142600-1724344200@www.kendallelectric.com
SUMMARY:Motion Control Fundamentals using Kinetix 5700(CIP) Servo Drives
DESCRIPTION:CCN132 presented by Rockwell Automation. Upon completion of this course\, you should be able to demonstrate fundamental motion control concepts common to all Rockwell Automation motion control systems. This course is designed to provide you with an understanding of the concepts\, terminology\, functionality\, and applications of motion control. \nThis course will also allow you to establish the foundation you need before learning the skills necessary to maintain and program motion control systems. This course does not address motion control system design or specific motion control software programming. If you are seeking training in these areas\, you should enroll in the relevant Rockwell Automation training courses\, making sure you have fulfilled the prerequisites for those courses prior to enrollment.
URL:https://www.kendallelectric.com/event/motion-control-fundamentals-using-kinetix-5700cip-servo-drives/
LOCATION:Kendall Electric – Wyoming\, 1100 58th St SW\, Wyoming\, MI\, 49509\, United States
CATEGORIES:Great Lakes North,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Motion-Control.jpg
ORGANIZER;CN="Camie White":MAILTO:camie.white@kendallelectric.com
GEO:42.8579904;-85.6907904
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Wyoming 1100 58th St SW Wyoming MI 49509 United States;X-APPLE-RADIUS=500;X-TITLE=1100 58th St SW:geo:-85.6907904,42.8579904
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240808T083000
DTEND;TZID=America/New_York:20240809T163000
DTSTAMP:20240603T143815Z
CREATED:20240130T213530Z
LAST-MODIFIED:20240603T143815Z
UID:10006186-1723105800-1723221000@www.kendallelectric.com
SUMMARY:Studio 5000 Logix Designer Level 2: Basic Ladder Logic Programming
DESCRIPTION:CCP151 presented by Rockwell Automation. After completing this course\, you should be able to program basic ladder logic instructions for Logix5000™ controllers. This is a skill-building course that provides you with the resources and hands-on practice required to complete this objective. You will have an opportunity to use the Studio 5000 Logix Designer® application to perform basic software tasks to meet the requirements of a given functional specification. In addition\, you will set up a sequencer to run equipment through a predefined procedure and separate production procedure from equipment control.
URL:https://www.kendallelectric.com/event/studio-5000-logix-designer-level-2-basic-ladder-logic-programming-14/
LOCATION:Kendall Electric – Wyoming\, 1100 58th St SW\, Wyoming\, MI\, 49509\, United States
CATEGORIES:Great Lakes North,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Software.jpg
ORGANIZER;CN="Camie White":MAILTO:camie.white@kendallelectric.com
GEO:42.8579904;-85.6907904
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Wyoming 1100 58th St SW Wyoming MI 49509 United States;X-APPLE-RADIUS=500;X-TITLE=1100 58th St SW:geo:-85.6907904,42.8579904
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240806T083000
DTEND;TZID=America/New_York:20240807T163000
DTSTAMP:20240603T143956Z
CREATED:20240130T213445Z
LAST-MODIFIED:20240603T143956Z
UID:10006185-1722933000-1723048200@www.kendallelectric.com
SUMMARY:Studio 5000 Logix Designer Level 1: ControlLogix System Fundamentals
DESCRIPTION:CCP146 presented by Rockwell Automation. After completing this course\, you should be able to perform basic ControlLogix® and Studio 5000 Logix Designer® tasks\, such as:\n• Creating and configuring a project\n• Communicating with a controller. \nThe course will assist you in developing and building a solid foundation with a fundamental knowledge of ControlLogix and other Logix5000™ systems. You will be introduced to basic Logix5000 concepts and terminology\, and you will be exposed to Logix5000 system hardware\, including hands-on experience with the ControlLogix platform.
URL:https://www.kendallelectric.com/event/studio-5000-logix-designer-level-1-controllogix-system-fundamentals-13/
LOCATION:Kendall Electric – Wyoming\, 1100 58th St SW\, Wyoming\, MI\, 49509\, United States
CATEGORIES:Great Lakes North,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Software.jpg
ORGANIZER;CN="Camie White":MAILTO:camie.white@kendallelectric.com
GEO:42.8579904;-85.6907904
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Wyoming 1100 58th St SW Wyoming MI 49509 United States;X-APPLE-RADIUS=500;X-TITLE=1100 58th St SW:geo:-85.6907904,42.8579904
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240730T083000
DTEND;TZID=America/New_York:20240801T163000
DTSTAMP:20240603T144410Z
CREATED:20240130T212215Z
LAST-MODIFIED:20240603T144410Z
UID:10006182-1722328200-1722529800@www.kendallelectric.com
SUMMARY:GuardLogix Application Development and Troubleshooting
DESCRIPTION:SAF-LOG104 presented by Rockwell Automation. Upon completion of this course\, you will be able to create a Studio 5000 Logix Designer® project for a GuardLogix® system and troubleshoot a previously operational GuardLogix system. \nYou will have the opportunity to develop and practice these skills by:\n• Learning GuardLogix concepts and terminology\n• Creating and configuring a GuardLogix project\n• Adding and configuring CompactBlock™ Guard I/O™ and POINT Guard I/O™ safety modules\n• Generating Safety Signatures and locking/unlocking a GuardLogix controller\n• Programming safety instructions\n• Troubleshooting a GuardLogix project
URL:https://www.kendallelectric.com/event/guardlogix-application-development-and-troubleshooting-7/
LOCATION:Kendall Electric – Wyoming\, 1100 58th St SW\, Wyoming\, MI\, 49509\, United States
CATEGORIES:Great Lakes North,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Safety.jpg
ORGANIZER;CN="Camie White":MAILTO:camie.white@kendallelectric.com
GEO:42.8579904;-85.6907904
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Wyoming 1100 58th St SW Wyoming MI 49509 United States;X-APPLE-RADIUS=500;X-TITLE=1100 58th St SW:geo:-85.6907904,42.8579904
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240711T083000
DTEND;TZID=America/New_York:20240712T163000
DTSTAMP:20240606T203029Z
CREATED:20240130T211745Z
LAST-MODIFIED:20240606T203029Z
UID:10006178-1720686600-1720801800@www.kendallelectric.com
SUMMARY:Studio 5000 Logix Designer Level 4: Structured Text/Sequential Function Chart Programming
DESCRIPTION:CCP154 presented by Rockwell Automation. Building on your project development skills\, such as creating tags and programming control code\, this course provides the skills and knowledge to program using the structured text and sequential function chart programming languages. You will learn how to select instructions\, expressions and constructs and then enter these elements and more into a routine. You will have an opportunity to translate a functional specification in to a sequential function chart. Also\, you will learn how to test sequential function chart logic using forces and step throughs. The instructor will demonstrate the relevant procedures required to program with structured text and sequential function charts. You will be provided ample opportunities to create and test their own projects.
URL:https://www.kendallelectric.com/event/studio-5000-loigx-designer-level-4-structured-text-sequential-function-chart-programming/
LOCATION:Kendall Electric – Wyoming\, 1100 58th St SW\, Wyoming\, MI\, 49509\, United States
CATEGORIES:Great Lakes North,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Software.jpg
ORGANIZER;CN="Camie White":MAILTO:camie.white@kendallelectric.com
GEO:42.8579904;-85.6907904
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Wyoming 1100 58th St SW Wyoming MI 49509 United States;X-APPLE-RADIUS=500;X-TITLE=1100 58th St SW:geo:-85.6907904,42.8579904
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240709T083000
DTEND;TZID=America/New_York:20240710T163000
DTSTAMP:20240603T150037Z
CREATED:20240130T211610Z
LAST-MODIFIED:20240603T150037Z
UID:10006176-1720513800-1720629000@www.kendallelectric.com
SUMMARY:Studio 5000 Logix Designer Level 4: Function Block Programming
DESCRIPTION:CCP152 presented by Rockwell Automation. This course is a skill-building programming course that provides you with an understanding of Studio 5000 Logix Designer® function block diagrams and terminology. This course also provides you with the resources and hands-on practice required to efficiently program a Logix5000™ controller using function block diagrams. You will have an opportunity to use Logix Designer application and perform software tasks to meet the requirements of a given functional specification. In addition to using function blocks\, you will perform parameter modifications to individual function block instructions\, as well as create and develop function block diagram programs and routines. You will also gain experience with a variety of function block instructions\, including PIDE and add-on instructions.
URL:https://www.kendallelectric.com/event/studio-5000-logix-designer-level-4-function-block-programming-3/
LOCATION:Kendall Electric – Wyoming\, 1100 58th St SW\, Wyoming\, MI\, 49509\, United States
CATEGORIES:Great Lakes North,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Software.jpg
ORGANIZER;CN="Camie White":MAILTO:camie.white@kendallelectric.com
GEO:42.8579904;-85.6907904
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Wyoming 1100 58th St SW Wyoming MI 49509 United States;X-APPLE-RADIUS=500;X-TITLE=1100 58th St SW:geo:-85.6907904,42.8579904
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240612T090000
DTEND;TZID=America/New_York:20240614T163000
DTSTAMP:20240228T150328Z
CREATED:20240214T201556Z
LAST-MODIFIED:20240228T150328Z
UID:10005976-1718182800-1718382600@www.kendallelectric.com
SUMMARY:Fundamentals of PowerFlex525 VFD Wiring and Commissioning
DESCRIPTION:Learn how to wire\, program\, and operate Variable Frequency Drives during this three-day course that covers a combination of instructor-led discussions\, demonstrations\, and hands-on labs. Using a VFD workstation\, HMI module and hand-held VFD test module\, students will leave with a better understanding of various control configurations and applications. Students will also test and troubleshoot VFDs using Fluke test and measurement equipment.
URL:https://www.kendallelectric.com/event/fundamentals-of-powerflex525-vfd-wiring-and-commissioning-9/
LOCATION:Kendall Electric – Wyoming\, 1100 58th St SW\, Wyoming\, MI\, 49509\, United States
CATEGORIES:Great Lakes North,Kendall Connected Training
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_KCT_Powerflex525.jpg
ORGANIZER;CN="Camie White":MAILTO:camie.white@kendallelectric.com
GEO:42.8579904;-85.6907904
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Wyoming 1100 58th St SW Wyoming MI 49509 United States;X-APPLE-RADIUS=500;X-TITLE=1100 58th St SW:geo:-85.6907904,42.8579904
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240611T090000
DTEND;TZID=America/New_York:20240611T163000
DTSTAMP:20240214T201750Z
CREATED:20240214T201750Z
LAST-MODIFIED:20240214T201750Z
UID:10005978-1718096400-1718123400@www.kendallelectric.com
SUMMARY:Rockwell Automation Variable Frequency Drives: Backup\, Replace\, Restore\, and Redeploy
DESCRIPTION:Designed specifically for maintenance personnel and electricians\, this one-day course gives students the opportunity to work with a fully functional automated system that contains all of the target VFDs\, PanelView terminals\, PLCs\, Servos\, & industrial switches. Students will\nsystematically one-by-one backup\, replace\, restore\, and return to service each device using detailed step-by step and pictorially illustrated labs. \nLab manuals included in this course can be used for future reference when replacing equipment on the plant floor.
URL:https://www.kendallelectric.com/event/rockwell-automation-variable-frequency-drives-backup-replace-restore-and-redeploy-2/
LOCATION:Kendall Electric – Wyoming\, 1100 58th St SW\, Wyoming\, MI\, 49509\, United States
CATEGORIES:Great Lakes North,Kendall Connected Training
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2024/02/VFD-Backup.jpg
ORGANIZER;CN="Camie White":MAILTO:camie.white@kendallelectric.com
GEO:42.8579904;-85.6907904
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Wyoming 1100 58th St SW Wyoming MI 49509 United States;X-APPLE-RADIUS=500;X-TITLE=1100 58th St SW:geo:-85.6907904,42.8579904
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240610T090000
DTEND;TZID=America/New_York:20240610T163000
DTSTAMP:20240214T204336Z
CREATED:20240214T203546Z
LAST-MODIFIED:20240214T204336Z
UID:10006262-1718010000-1718037000@www.kendallelectric.com
SUMMARY:Rockwell Automation HMIs: Backup\, Replace\, Restore\, and Redeploy
DESCRIPTION:Designed specifically for maintenance personnel and electricians\, this one-day course gives students the opportunity to work with a fully functional automated system that contains all of the target VFDs\, PanelView terminals\, PLCs\, Servos\, & industrial switches. Students will\nsystematically one-by-one backup\, replace\, restore\, and return to service each device using detailed step-by step and pictorially illustrated labs. \nLab manuals included in this course can be used for future reference when replacing equipment on the plant floor.
URL:https://www.kendallelectric.com/event/rockwell-automation-hmis-backup-replace-restore-and-redeploy-4/
LOCATION:Kendall Electric – Wyoming\, 1100 58th St SW\, Wyoming\, MI\, 49509\, United States
CATEGORIES:Great Lakes North,Kendall Connected Training
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2024/02/VFD-Backup.jpg
ORGANIZER;CN="Camie White":MAILTO:camie.white@kendallelectric.com
GEO:42.8579904;-85.6907904
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Wyoming 1100 58th St SW Wyoming MI 49509 United States;X-APPLE-RADIUS=500;X-TITLE=1100 58th St SW:geo:-85.6907904,42.8579904
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240604T080000
DTEND;TZID=America/New_York:20240607T163000
DTSTAMP:20240625T140700Z
CREATED:20240201T211436Z
LAST-MODIFIED:20240625T140700Z
UID:10006205-1717488000-1717777800@www.kendallelectric.com
SUMMARY:PLC Wiring & Troubleshooting
DESCRIPTION:Learn how to talk through and troubleshoot PLC ladder logic using Logix5000 software in order to locate a “real” faulty input or output device\, replace it\, and get the process back up and running. It’s all about troubleshooting! Each attendee will actually wire the input and output (I/O) field devices to the PLC using their own PLC Trainer. \nSession Topics: \n• Ethernet communications set up using RSLinx\n• Discuss the BootP utility using an “out of the box” controller to set the IP address and configuration in RSLinx\n• Ethernet/IP driver: explain “RSWho views” and RSLinx configuration\n• Toggling and forcing real and simulated inputs and outputs\n• Timers\, Counters\, One-Shot\n• Compare blocks\, First-Scan\, Mov/Clr blocks\n• Math blocks\, Set Bit Zero/Negative\n• Jump\, Jump to Subroutine\, Master Control Reset\n• One/two Dimension arrays\, Fill File\, Copy File\, Average File\n• Bit-Shift Right/Left\, First-In-First-Out\, Load/Unload\n• Last-In-First-Out\, Load/Unload\, Masked Move\n• Sequencer Output using the Array\, Mask\, and Output Tables\n• Indirect Addressing\, Add-On Instructions
URL:https://www.kendallelectric.com/event/plc-wiring-troubleshooting-8/
LOCATION:Kendall Electric – Wyoming\, 1100 58th St SW\, Wyoming\, MI\, 49509\, United States
CATEGORIES:Great Lakes North,Kendall Connected Training
ATTACH;FMTTYPE=image/gif:https://www.kendallelectric.com/wp-content/uploads/2023/09/Training_KCT_PLC.gif
ORGANIZER;CN="Camie White":MAILTO:camie.white@kendallelectric.com
GEO:42.8579904;-85.6907904
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Wyoming 1100 58th St SW Wyoming MI 49509 United States;X-APPLE-RADIUS=500;X-TITLE=1100 58th St SW:geo:-85.6907904,42.8579904
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240531T070000
DTEND;TZID=America/New_York:20240531T100000
DTSTAMP:20240517T163056Z
CREATED:20240415T152517Z
LAST-MODIFIED:20240517T163056Z
UID:10006082-1717138800-1717149600@www.kendallelectric.com
SUMMARY:Medium Voltage Term and Splicing
DESCRIPTION:Join us for an in-depth discussion on installation best practices. This session will cover underground cable\, 200A loadbreak\, 600A deadbreak\, arresters\, and terminations. \nAttendees will leave with a better understanding of proper installation\, which install tools to use\, and how to adjust. Our instructor will coach you on how to prep cable to install an elbow or termination during the hands-on portion. \nSession Topics: \n• Installation Best Practice\n• Installation Tools\n• Underground Cable\n• 600A Deadbreak\n• Arresters\n• Terminations \nThis class is also being offered May 30 in Portage\, MI.
URL:https://www.kendallelectric.com/event/medium-voltage-term-and-splicing-4/
LOCATION:Kendall Electric – Wyoming\, 1100 58th St SW\, Wyoming\, MI\, 49509\, United States
CATEGORIES:Great Lakes North,Kendall Technology Update
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Safety.jpg
ORGANIZER;CN="Marketing":MAILTO:marketing@kendallelectric.com
GEO:42.8579904;-85.6907904
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Wyoming 1100 58th St SW Wyoming MI 49509 United States;X-APPLE-RADIUS=500;X-TITLE=1100 58th St SW:geo:-85.6907904,42.8579904
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240508T083000
DTEND;TZID=America/New_York:20240509T163000
DTSTAMP:20240415T120946Z
CREATED:20231102T183553Z
LAST-MODIFIED:20240415T120946Z
UID:10006098-1715157000-1715272200@www.kendallelectric.com
SUMMARY:Functional Safety for Machinery Technician Certification (TÜV Rheinland)
DESCRIPTION:SAF-TUV0T presented by Rockwell Automation. The standards regarding functional safety and relevant laws and directives demand that people and organizations performing responsible (accountable) tasks during relevant life cycle phases of a machine must achieve and prove required competencies. \nIn this training\, students will learn how the current standards dictate the selection\, assembly\, installation\, validation\, and maintenance of safety devices and components to reduce hazards from machinery and ensure the safety of people and the environment. Practical examples will demonstrate possibilities regarding machine protection. \nThis training will also cover safety topics\, such as: redundancy\, testing\, distance calculations\, assigning required level of risk reduction as PL\, monitoring moveable guard positions\, and fault avoidance for relevant life cycle phases. After completing this course\, students should understand and be able to use ISO 12100\, IEC 60204-1 and other relevant machine functional safety standards. \nStudents who want Functional Safety for Machinery Technician Certification (TÜV Rheinland) must meet all eligibility requirements and pass the exam scheduled at the end of the second day. \nLimited time offer: Register before January 31\, 2024 to receive a 10% discount making the cost $3\,300 per student.
URL:https://www.kendallelectric.com/event/functional-safety-for-machinery-technician-certification-tuv-rheinland/
LOCATION:Kendall Electric – Wyoming\, 1100 58th St SW\, Wyoming\, MI\, 49509\, United States
CATEGORIES:Great Lakes North,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Safety.jpg
ORGANIZER;CN="Camie White":MAILTO:camie.white@kendallelectric.com
GEO:42.8579904;-85.6907904
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Wyoming 1100 58th St SW Wyoming MI 49509 United States;X-APPLE-RADIUS=500;X-TITLE=1100 58th St SW:geo:-85.6907904,42.8579904
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240423T083000
DTEND;TZID=America/New_York:20240425T163000
DTSTAMP:20240131T193455Z
CREATED:20240130T210413Z
LAST-MODIFIED:20240131T193455Z
UID:10005949-1713861000-1714062600@www.kendallelectric.com
SUMMARY:EtherNet/IP Configuration and Troubleshooting
DESCRIPTION:CCP183 presented by Rockwell Automation. \nThis course should prepare you to effectively:\n• Configure a Stratix® switch (5700\, 8000\, and/or 8300) to meet a variety of network requirements\n• Assign IP addresses to devices on an EtherNet/IP network using rotary switches and a variety of software\n• Monitor switch performance and status\n• Diagnose and resolve issues with switches and devices on a network \nDuring switch configuration\, you will have an opportunity to:\n• Configure a switch using both the Device Manager Web Interface and Studio 5000 Logix Designer® software\n• Set up one-to-one IP address translation (NAT) for segmenting machine-level network devices from the plant network\n• Secure and limit access to a switch \nOnce the EtherNet/IP network is up and running\, you will monitor diagnostic information using web-based technologies and modify a web server module’s data views and tag values. You will resolve issues with communication between devices on a network. You will troubleshoot an EtherNet/ IP network’s media and components (including the Stratix 5700 switch); run diagnostic tests to resolve system and port issues; and perform common functions such as resetting the switch.
URL:https://www.kendallelectric.com/event/ethernet-ip-configuration-and-troubleshooting-5/
LOCATION:Kendall Electric – Wyoming\, 1100 58th St SW\, Wyoming\, MI\, 49509\, United States
CATEGORIES:Great Lakes North,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Networking.jpg
ORGANIZER;CN="Camie White":MAILTO:camie.white@kendallelectric.com
GEO:42.8579904;-85.6907904
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Wyoming 1100 58th St SW Wyoming MI 49509 United States;X-APPLE-RADIUS=500;X-TITLE=1100 58th St SW:geo:-85.6907904,42.8579904
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240312T083000
DTEND;TZID=America/New_York:20240315T163000
DTSTAMP:20231204T160004Z
CREATED:20230927T145234Z
LAST-MODIFIED:20231204T160004Z
UID:10006038-1710232200-1710520200@www.kendallelectric.com
SUMMARY:Studio 5000 Logix Designer Level 3: Project Development
DESCRIPTION:CCP143 presented by Rockwell Automation. Upon completion of this course\, given a functional specification for a Logix5000™ application\, you should be able to develop a project to meet the specification requirements. \nThis course covers tasks common to the following hardware\, which all use the Logix5000 control engine:\n• ControlLogix® controllers\n• CompactLogix™ controllers\n• SoftLogix™ controllers \nThis course builds upon your knowledge of common controller terms and operation and your experience with basic ladder logic programming. You can gain a deeper understanding of project development tasks that are common to all Logix5000 controllers. Such tasks include organizing tasks and routines\, organizing controller data\, configuring modules\, and sharing data. You will also use producer/consumer technology for multicasting to input and output devices\, sharing data between controllers\, and controlling remote I/O.
URL:https://www.kendallelectric.com/event/studio-5000-logix-designer-level-3-project-development-5/
LOCATION:Kendall Electric – Wyoming\, 1100 58th St SW\, Wyoming\, MI\, 49509\, United States
CATEGORIES:Great Lakes North,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Software.jpg
ORGANIZER;CN="Camie White":MAILTO:camie.white@kendallelectric.com
GEO:42.8579904;-85.6907904
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Wyoming 1100 58th St SW Wyoming MI 49509 United States;X-APPLE-RADIUS=500;X-TITLE=1100 58th St SW:geo:-85.6907904,42.8579904
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240212T083000
DTEND;TZID=America/New_York:20240216T163000
DTSTAMP:20240131T172333Z
CREATED:20240110T193305Z
LAST-MODIFIED:20240131T172333Z
UID:10006140-1707726600-1708101000@www.kendallelectric.com
SUMMARY:Accelerated Logix5000 Programmer Certificate Course Level 1
DESCRIPTION:CCP250 presented by Rockwell Automation. This accelerated course is for individuals who can quickly learn and apply Logix5000™ concepts\, terminology\, hardware\, and the Studio 5000 Logix Designer® programming environment. You will quickly move from these early concepts to using producer/ consumer technology and messages to multicast input and output devices\, share data between controllers\, and control remote I/O. This course prepares you for the Accelerated Logix5000 Programmer Certificate Course Level 1 certificate exam\, which is included in the course price. Upon completion of this course\, given a functional specification for a Logix5000 application\, you should be able to develop a project to meet the specification requirements.
URL:https://www.kendallelectric.com/event/accelerated-logix5000-programmer-certificate-course-level-1/
LOCATION:Kendall Electric – Wyoming\, 1100 58th St SW\, Wyoming\, MI\, 49509\, United States
CATEGORIES:Great Lakes North,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Software.jpg
ORGANIZER;CN="Camie White":MAILTO:camie.white@kendallelectric.com
GEO:42.8579904;-85.6907904
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Wyoming 1100 58th St SW Wyoming MI 49509 United States;X-APPLE-RADIUS=500;X-TITLE=1100 58th St SW:geo:-85.6907904,42.8579904
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240122T123000
DTEND;TZID=America/New_York:20240126T163000
DTSTAMP:20240110T193212Z
CREATED:20240110T193212Z
LAST-MODIFIED:20240110T193212Z
UID:10006139-1705926600-1706286600@www.kendallelectric.com
SUMMARY:Studio 5000 Logix Designer Level 1: ControlLogix Fundamentals and Troubleshooting
DESCRIPTION:CCP299 presented by Rockwell Automation. Upon completion of this course\, you should be able to troubleshoot a previously operational ControlLogix® system and restore normal operation. You will have the opportunity to develop and practice these skills by: \n• Learning basic concepts and terminology used with:\n– ControlLogix system hardware\n– Studio 5000 Logix Designer® application \n• Practicing a systematic strategy for diagnosing and troubleshooting problems:\n– Configuration issues\n– Electrical noise\n– Faulty/malfunctioning field devices\n– Controller I/O\, or other hardware issues \n• Performing hands-on exercises
URL:https://www.kendallelectric.com/event/studio-5000-logix-designer-level-1-controllogix-fundamentals-and-troubleshooting-10/
LOCATION:Kendall Electric – Wyoming\, 1100 58th St SW\, Wyoming\, MI\, 49509\, United States
CATEGORIES:Great Lakes North,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Software.jpg
ORGANIZER;CN="Camie White":MAILTO:camie.white@kendallelectric.com
GEO:42.8579904;-85.6907904
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Wyoming 1100 58th St SW Wyoming MI 49509 United States;X-APPLE-RADIUS=500;X-TITLE=1100 58th St SW:geo:-85.6907904,42.8579904
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20231130T083000
DTEND;TZID=UTC:20231201T163000
DTSTAMP:20231016T211409Z
CREATED:20230914T204131Z
LAST-MODIFIED:20231016T211409Z
UID:10006005-1701333000-1701448200@www.kendallelectric.com
SUMMARY:Studio 5000 Logix Designer Level 2: Basic Ladder Logic Programming
DESCRIPTION:CCP151 presented by Rockwell Automation. After completing this course\, you should be able to program basic ladder logic instructions for Logix5000™ controllers. This is a skill-building course that provides you with the resources and hands-on practice required to complete this objective. \nYou will have an opportunity to use the Studio 5000 Logix Designer® application to perform basic software tasks to meet the requirements of a given functional specification. In addition\, you will set up a sequencer to run equipment through a predefined procedure and separate production procedure from equipment control.
URL:https://www.kendallelectric.com/event/studio-5000-logix-designer-level-2-basic-ladder-logic-programming-6/
LOCATION:Kendall Electric – Wyoming\, 1100 58th St SW\, Wyoming\, MI\, 49509\, United States
CATEGORIES:Great Lakes North,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Software.jpg
ORGANIZER;CN="Camie White":MAILTO:camie.white@kendallelectric.com
GEO:42.8579904;-85.6907904
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Wyoming 1100 58th St SW Wyoming MI 49509 United States;X-APPLE-RADIUS=500;X-TITLE=1100 58th St SW:geo:-85.6907904,42.8579904
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20231128T083000
DTEND;TZID=UTC:20231129T163000
DTSTAMP:20231016T211426Z
CREATED:20230914T204212Z
LAST-MODIFIED:20231016T211426Z
UID:10006010-1701160200-1701275400@www.kendallelectric.com
SUMMARY:Studio 5000 Logix Designer Level 1: ControlLogix System Fundamentals
DESCRIPTION:CCP146 presented by Rockwell Automation. After completing this course\, you should be able to perform basic ControlLogix® and Studio 5000 Logix Designer® tasks\, such as:\n• Creating and configuring a project\n• Communicating with a controller. \nThe course will assist you in developing and building a solid foundation with a fundamental knowledge of ControlLogix and other Logix5000™ systems. You will be introduced to basic Logix5000 concepts and terminology\, and you will be exposed to Logix5000 system hardware\, including hands-on experience with the ControlLogix platform.
URL:https://www.kendallelectric.com/event/studio-5000-logix-designer-level-1-controllogix-system-fundamentals-5/
LOCATION:Kendall Electric – Wyoming\, 1100 58th St SW\, Wyoming\, MI\, 49509\, United States
CATEGORIES:Great Lakes North,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Software.jpg
ORGANIZER;CN="Camie White":MAILTO:camie.white@kendallelectric.com
GEO:42.8579904;-85.6907904
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Wyoming 1100 58th St SW Wyoming MI 49509 United States;X-APPLE-RADIUS=500;X-TITLE=1100 58th St SW:geo:-85.6907904,42.8579904
END:VEVENT
END:VCALENDAR