BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//Kendall Electric - ECPv6.17.1//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-ORIGINAL-URL:https://www.kendallelectric.com
X-WR-CALDESC:Events for Kendall Electric
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:America/Chicago
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20250309T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20251102T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20260308T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20261101T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20270314T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20271107T070000
END:STANDARD
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:America/New_York
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20250309T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20251102T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20260308T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20261101T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20270314T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20271107T060000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260721T083000
DTEND;TZID=America/Chicago:20260723T163000
DTSTAMP:20260326T133433Z
CREATED:20260116T195228Z
LAST-MODIFIED:20260326T133433Z
UID:10007063-1784622600-1784824200@www.kendallelectric.com
SUMMARY:PowerFlex 750 Series Configuration\, Startup\, Maintenance\, and Troubleshooting
DESCRIPTION:DRV215 presented by Rockwell Automation. \nUpon completion of this course\, given a wired PowerFlex 750-Series drive (PowerFlex 753 or PowerFlex 755) and AC motor\, you will be able to install the drive correctly\, start it up\, and configure drive parameters to meet application-specific needs. \nThe course also introduces concepts and techniques that will assist you in successfully maintaining and troubleshooting the drive\, recognizing PowerFlex 750-Series drive hardware\, and diagnosing specific faults. \nThroughout the course\, you will have the chance to use a variety of hardware and software tools\, including: \n\nTHE A6 LCD HIM\nConnected Components Workbench™ software\nDriveExecutive™ software.\n\nAfter each demonstration\, you will be given exercises that offer extensive hands-on practice using a PowerFlex 753 or Powerflex 755 drive.
URL:https://www.kendallelectric.com/event/powerflex-750-series-configuration-startup-maintenance-and-troubleshooting-7/
LOCATION:Kendall Electric – Montgomery\, 1029 Lagoon Business Loop\, Montgomery\, AL\, 36117\, United States
CATEGORIES:Rockwell Instructor-Led,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Networking.jpg
ORGANIZER;CN="Melissa Kincaid":MAILTO:melissa.kincaid@kendallelectric.com
GEO:32.4067572;-86.2182565
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Montgomery 1029 Lagoon Business Loop Montgomery AL 36117 United States;X-APPLE-RADIUS=500;X-TITLE=1029 Lagoon Business Loop:geo:-86.2182565,32.4067572
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260714T083000
DTEND;TZID=America/Chicago:20260717T163000
DTSTAMP:20260326T133256Z
CREATED:20260114T211912Z
LAST-MODIFIED:20260326T133256Z
UID:10007054-1784017800-1784305800@www.kendallelectric.com
SUMMARY:Studio 5000™ Logix Designer Level 3: Project Development
DESCRIPTION:CCP143 presented by Rockwell Automation. \nUpon completion of this course\, given a functional specification for a Logix5000™ application\, you should be able to develop a project to meet the specification requirements. \nThis course covers tasks common to the following hardware\, which all use the Logix5000 control engine: \n\nControlLogix® controllers\nCompactLogix™ controllers\nSoftLogix™ controllers\n\nThis course builds upon your knowledge of common controller terms and operation and your experience with basic ladder logic programming. You can gain a deeper understanding of project development tasks that are common to all Logix5000 controllers. Such tasks include organizing tasks and routines\, organizing controller data\, configuring modules\, and sharing data. You will also use producer/consumer technology for multicasting to input and output devices\, sharing data between controllers\, and controlling remote I/O.
URL:https://www.kendallelectric.com/event/studio-5000-logix-designer-level-3-project-development-22/
LOCATION:Kendall Electric – Jackson\, 25 American Drive\, Jackson\, TN\, 38301\, United States
CATEGORIES:Rockwell Instructor-Led,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Software.jpg
ORGANIZER;CN="Melissa Kincaid":MAILTO:melissa.kincaid@kendallelectric.com
GEO:35.6327873;-88.7853842
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Jackson 25 American Drive Jackson TN 38301 United States;X-APPLE-RADIUS=500;X-TITLE=25 American Drive:geo:-88.7853842,35.6327873
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260624T090000
DTEND;TZID=America/New_York:20260626T163000
DTSTAMP:20260211T193209Z
CREATED:20260206T135844Z
LAST-MODIFIED:20260211T193209Z
UID:10007105-1782291600-1782491400@www.kendallelectric.com
SUMMARY:Fundamentals of PowerFlex525 VFD Wiring and Comissioning
DESCRIPTION:Learn how to install\, test\, start-up\, and troubleshoot basic PowerFlex 525 VFD applications.\nLearn how to wire\, program\, and operate Variable Frequency Drives during this three-day course that covers a combination of instructor-led discussions\, demonstrations\, and hands-on labs. \nUsing a VFD workstation\, HMI module and hand-held VFD test module\, students will leave with a better understanding of various control configurations and applications. Students will also test and troubleshoot VFDs using Fluke test and measurement equipment. \nSession Topics: \n\nPowerFlex 525 and 755TS Drive Hands Labs\nTesting VFD Power Components\nAC Motor Fundamentals and Measurements\nInstallation Considerations\nPower and Control Wiring Configurations\nVFD Application Techniques and Parameter Adjustments\nEthernet Communications Configuration\nVoltage and Current Measurements using Fluke VOM® and Clamp Ammeter
URL:https://www.kendallelectric.com/event/fundamentals-of-powerflex525-vfd-wiring-and-comissioning-6/
LOCATION:Kendall Electric – Kingsport\, 1241 Jan Way\, Kingsport\, TN\, 37660\, United States
CATEGORIES:Kendall Connected Training,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2025/01/drives-event-image.jpg
ORGANIZER;CN="Melissa Kincaid":MAILTO:melissa.kincaid@kendallelectric.com
GEO:36.5179745;-82.5598666
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Kingsport 1241 Jan Way Kingsport TN 37660 United States;X-APPLE-RADIUS=500;X-TITLE=1241 Jan Way:geo:-82.5598666,36.5179745
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260623T090000
DTEND;TZID=America/New_York:20260623T163000
DTSTAMP:20260212T152308Z
CREATED:20260206T153110Z
LAST-MODIFIED:20260212T152308Z
UID:10006601-1782205200-1782232200@www.kendallelectric.com
SUMMARY:Rockwell Automation Variable Frequency Drives: Backup\, Replace\, Restore\, and Redeploy
DESCRIPTION:Get hands-on experience returning failed automation equipment back to service. \nDesigned specifically for maintenance personnel and electricians\, this one-day course gives students the opportunity to work with a fully functional automated system that contains all of the target VFDs\, PanelView terminals\, PLCs\, Servos\, & industrial switches. Students will systematically one-by-one backup\, replace\, restore\, and return to service each device using detailed step-by step and pictorially illustrated labs. \nLab manuals included in this course can be used for future reference when replacing equipment on the plant floor. \nProducts covered: \n\nVariable Frequency Drives (VFDs)\n\nPowerFlex 525\, PowerFlex 755\, PowerFlex 527\n\n\nKinetix Servos\n\nKinetix 5300\, Kinetix 5500
URL:https://www.kendallelectric.com/event/rockwell-automation-variable-frequency-drives-backup-replace-restore-and-redeploy-30/
LOCATION:Kendall Electric – Kingsport\, 1241 Jan Way\, Kingsport\, TN\, 37660\, United States
CATEGORIES:Kendall Connected Training,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2025/01/drives-event-image.jpg
ORGANIZER;CN="Melissa Kincaid":MAILTO:melissa.kincaid@kendallelectric.com
GEO:36.5179745;-82.5598666
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Kingsport 1241 Jan Way Kingsport TN 37660 United States;X-APPLE-RADIUS=500;X-TITLE=1241 Jan Way:geo:-82.5598666,36.5179745
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260622T090000
DTEND;TZID=America/New_York:20260622T163000
DTSTAMP:20260422T184248Z
CREATED:20260205T200220Z
LAST-MODIFIED:20260422T184248Z
UID:10007098-1782118800-1782145800@www.kendallelectric.com
SUMMARY:Introduction to PanelView Plus 7
DESCRIPTION:Get hands-on with PanelView Plus 7 HMIs in these 1-day instructor-led training sessions. \nThis one-day technical course focuses on programming and operating the PanelView Plus 7 Graphic Terminal using FactoryTalk View and RSLinx software. Attendees will build a Logix PLC project\, develop multiple PanelView Plus 7 HMI applications\, and bind PLC tags to HMI objects through guided instruction and hands-on labs. The training emphasizes real-world configuration\, navigation\, and feature implementation to support efficient HMI development and deployment. \n\nFlexible – only choose the days you want\nScalable – classes cover various skill levels\nIndividual – students will be provided with individual lab stations
URL:https://www.kendallelectric.com/event/introduction-to-panelview-plus-7-23/
LOCATION:Kendall Electric – Kingsport\, 1241 Jan Way\, Kingsport\, TN\, 37660\, United States
CATEGORIES:Kendall Connected Training,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2026/02/PanelView-Plus-7.jpeg
ORGANIZER;CN="Melissa Kincaid":MAILTO:melissa.kincaid@kendallelectric.com
GEO:36.5179745;-82.5598666
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Kingsport 1241 Jan Way Kingsport TN 37660 United States;X-APPLE-RADIUS=500;X-TITLE=1241 Jan Way:geo:-82.5598666,36.5179745
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260616T083000
DTEND;TZID=America/New_York:20260619T123000
DTSTAMP:20260326T133213Z
CREATED:20260119T162154Z
LAST-MODIFIED:20260326T133213Z
UID:10007075-1781598600-1781872200@www.kendallelectric.com
SUMMARY:FactoryTalk Historian SE Configuration and Data Collection
DESCRIPTION:RS-FTHSEC presented by Rockwell Automation. \nThis course will provide you with an overview of the various FactoryTalk® Historian tools for collecting data. You will learn how to configure a FactoryTalk Historian Site Edition system. The course also covers how to use Microsoft Excel to create and modify FactoryTalk Historian tags. \nDuring the course\, you will learn how to apply exception and compression to filter data to be archived. Also\, you will be given an opportunity to compare the use of Polled versus Advised data collection modes. Data buffering\, layers/methods of redundancy\, archive management and backup will also be covered. \nUpon completion of the course\, you will have gained exposure to the many aspects of the FactoryTalk Historian system and be able to configure FactoryTalk Historian to collect data.
URL:https://www.kendallelectric.com/event/factorytalk-historian-se-configuration-and-data-collection-4/
LOCATION:Kendall Electric – Knoxville\, 170 Mabry Hood Road\, Knoxville\, TN\, 37922\, United States
CATEGORIES:Rockwell Instructor-Led,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Visualization.jpg
ORGANIZER;CN="Melissa Kincaid":MAILTO:melissa.kincaid@kendallelectric.com
GEO:35.907472;-84.1186772
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Knoxville 170 Mabry Hood Road Knoxville TN 37922 United States;X-APPLE-RADIUS=500;X-TITLE=170 Mabry Hood Road:geo:-84.1186772,35.907472
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260616T083000
DTEND;TZID=America/Chicago:20260618T163000
DTSTAMP:20260326T133114Z
CREATED:20260114T210724Z
LAST-MODIFIED:20260326T133114Z
UID:10007052-1781598600-1781800200@www.kendallelectric.com
SUMMARY:Motion Control Fundamentals Using Kinetix 5700 (CIP) Servo Drives
DESCRIPTION:CCN132 presented by Rockwell Automation. \nUpon completion of this course\, you should be able to demonstrate fundamental motion control concepts common to all Rockwell Automation motion control systems. \nThis course is designed to provide you with an understanding of the concepts\, terminology\, functionality\, and applications of motion control. This course will also allow you to establish the foundation you need before learning the skills necessary to maintain and program motion control systems. \nThis course does not address motion control system design or specific motion control software programming. If you are seeking training in these areas\, you should enroll in the relevant Rockwell Automation training courses\, making sure you have fulfilled the prerequisites for those courses prior to enrollment.
URL:https://www.kendallelectric.com/event/motion-control-fundamentals-using-kinetix-5700-cip-servo-drives-10/
LOCATION:Kendall Electric – Jackson\, 25 American Drive\, Jackson\, TN\, 38301\, United States
CATEGORIES:Rockwell Instructor-Led,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Motion-Control.jpg
ORGANIZER;CN="Melissa Kincaid":MAILTO:melissa.kincaid@kendallelectric.com
GEO:35.6327873;-88.7853842
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Jackson 25 American Drive Jackson TN 38301 United States;X-APPLE-RADIUS=500;X-TITLE=25 American Drive:geo:-88.7853842,35.6327873
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260615T123000
DTEND;TZID=America/Chicago:20260619T163000
DTSTAMP:20260326T133020Z
CREATED:20260116T155005Z
LAST-MODIFIED:20260326T133020Z
UID:10007058-1781526600-1781886600@www.kendallelectric.com
SUMMARY:Studio 5000 Logix Designer Level 1: ControlLogix Fundamentals and Troubleshooting
DESCRIPTION:CCP299 presented by Rockwell Automation. \nUpon completion of this course\, you should be able to troubleshoot a previously operational ControlLogix® system and restore normal operation. \nYou will have the opportunity to develop and practice these skills by: \n\nLearning basic concepts and terminology used with:\nControlLogix system hardware\nStudio 5000 Logix Designer® application\nPracticing a systematic strategy for diagnosing and troubleshooting problems:\n\nConfiguration issues\nElectrical noise\nFaulty/malfunctioning field devices\nController I/O\, or other hardware issues\nPerforming hands-on exercises
URL:https://www.kendallelectric.com/event/studio-5000-logix-designer-level-1-controllogix-fundamentals-and-troubleshooting-43/
LOCATION:Kendall Electric – Montgomery\, 1029 Lagoon Business Loop\, Montgomery\, AL\, 36117\, United States
CATEGORIES:Rockwell Instructor-Led,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Software.jpg
ORGANIZER;CN="Melissa Kincaid":MAILTO:melissa.kincaid@kendallelectric.com
GEO:32.4067572;-86.2182565
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Montgomery 1029 Lagoon Business Loop Montgomery AL 36117 United States;X-APPLE-RADIUS=500;X-TITLE=1029 Lagoon Business Loop:geo:-86.2182565,32.4067572
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260609T083000
DTEND;TZID=America/New_York:20260612T163000
DTSTAMP:20260326T132838Z
CREATED:20260119T150652Z
LAST-MODIFIED:20260326T132838Z
UID:10007072-1780993800-1781281800@www.kendallelectric.com
SUMMARY:Industrial Electrical Controls Fundamentals
DESCRIPTION:MFG213 presented by Rockwell Automation. \nThis course is designed to provide knowledge and skills required to install\, maintain and troubleshoot machine controls. \nAt the completion of this course\, you will be able to: \n\nDefine the safety considerations that must be observed when installing\, checking or locking out electrical equipment\nDefine uses and functions of input and output devices\, relays\, and motors\nDemonstrate the reading of schematic diagrams and logic\nDefine an open and short condition and perform voltage and current measurements\nDemonstrate the proper use of the following test equipment in lab to measure voltage\, current\, resistance and continuity: VOM\, DVM\, Multi-meters\, continuity tester and amp probe\nApproximate secondary voltage\, secondary current and primary current of a transformer when given its turns ratio\, primary voltage and secondary load\nIdentify the proper wiring configurations of a control transformer’s primary current for 240V and 480V operation\nApproximate a transformer’s maximum primary current for 480V operation\, using the nameplate information
URL:https://www.kendallelectric.com/event/industrial-electrical-controls-fundamentals-23/
LOCATION:Kendall Electric – Chattanooga\, 6233 Airpark Drive\, Chattanooga\, TN\, 37421\, United States
CATEGORIES:Rockwell Instructor-Led,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Networking.jpg
ORGANIZER;CN="Melissa Kincaid":MAILTO:melissa.kincaid@kendallelectric.com
GEO:35.0354726;-85.1861614
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Chattanooga 6233 Airpark Drive Chattanooga TN 37421 United States;X-APPLE-RADIUS=500;X-TITLE=6233 Airpark Drive:geo:-85.1861614,35.0354726
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260528T090000
DTEND;TZID=America/Chicago:20260528T143000
DTSTAMP:20260513T165134Z
CREATED:20260513T165134Z
LAST-MODIFIED:20260513T165134Z
UID:10006679-1779958800-1779978600@www.kendallelectric.com
SUMMARY:Advanced Shift into Stratix
DESCRIPTION:Go beyond basic configuration with this advanced fundamentals\, hands-on lab and capstone experience. Learn to build and validate a resilient industrial network that improves uptime\, increases throughput without new hardware\, and reduces security risk by addressing key Stratix® 5200 behavior changes versus legacy platforms.
URL:https://www.kendallelectric.com/event/advanced-shift-into-stratix-12/
LOCATION:Kendall Electric – Irondale\, 1189 Grants Mill Road\, Irondale\, AL\, 35210\, United States
CATEGORIES:Kendall Technology Update,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2025/10/web_Training_KCT_Stratix2.jpg
ORGANIZER;CN="Melissa Kincaid":MAILTO:melissa.kincaid@kendallelectric.com
GEO:33.5332527;-86.6836318
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Irondale 1189 Grants Mill Road Irondale AL 35210 United States;X-APPLE-RADIUS=500;X-TITLE=1189 Grants Mill Road:geo:-86.6836318,33.5332527
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260527T083000
DTEND;TZID=America/Chicago:20260529T163000
DTSTAMP:20260326T132757Z
CREATED:20260119T162735Z
LAST-MODIFIED:20260326T132757Z
UID:10006550-1779870600-1780072200@www.kendallelectric.com
SUMMARY:GuardLogix Application Development and Troubleshooting
DESCRIPTION:SAF-LOG104 presented by Rockwell Automation. \nUpon completion of this course\, you will be able to create a Studio 5000 Logix Designer® project for a GuardLogix® system and troubleshoot a previously operational GuardLogix system. \nYou will have the opportunity to develop and practice these skills by: \n\nLearning GuardLogix concepts and terminology\nCreating and configuring a GuardLogix project:\nAdding and configuring CompactBlock™ Guard I/O™ and POINT Guard I/O™ safety modules:\nGenerating Safety Signatures and locking/unlocking a GuardLogix controller\nProgramming safety instructions\nTroubleshooting a GuardLogix project
URL:https://www.kendallelectric.com/event/guardlogix-application-development-and-troubleshooting-21/
LOCATION:Kendall Electric – Jackson\, 25 American Drive\, Jackson\, TN\, 38301\, United States
CATEGORIES:Rockwell Instructor-Led,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Safety.jpg
ORGANIZER;CN="Melissa Kincaid":MAILTO:melissa.kincaid@kendallelectric.com
GEO:35.6327873;-88.7853842
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Jackson 25 American Drive Jackson TN 38301 United States;X-APPLE-RADIUS=500;X-TITLE=25 American Drive:geo:-88.7853842,35.6327873
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260527T083000
DTEND;TZID=America/Chicago:20260528T163000
DTSTAMP:20260326T132703Z
CREATED:20260119T143412Z
LAST-MODIFIED:20260326T132703Z
UID:10007069-1779870600-1779985800@www.kendallelectric.com
SUMMARY:Electrical Safety for Qualified Personnel
DESCRIPTION:FND-035 presented by Rockwell Automation. \nThis is an in-depth electrical safety course that covers electrical safety including LOTO and arc flash that meets the training requirements specified in OSHA 1910 and NFPA 70E. \nUpon completion of this course\, the participants will be able to do the following: N54 \n\nDescribe general safety hazards and precautions associated with electrical systems\nDescribe electrical tool and equipment safety\nDefine voltage level conventions for electrical systems\nDescribe electrical system lockout/tagout requirements\nIdentify the requirements for working on energized equipment\nGiven a scenario\, describe the requirements associated with arc flash protection\nGiven a scenario\, discuss the proper use of personal protective equipment\nDescribe the proper use of electrical protective rubber goods\nExplain the requirements for protective grounding\nDescribe the electrical safety requirements associated with fuses\nDescribe the electrical safety requirements associated with switchgear and circuit breakers\nDescribe the electrical safety requirements for batteries and DC systems
URL:https://www.kendallelectric.com/event/electrical-safety-for-qualified-personnel-5/
LOCATION:Kendall Electric – Montgomery\, 1029 Lagoon Business Loop\, Montgomery\, AL\, 36117\, United States
CATEGORIES:Rockwell Instructor-Led,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Safety.jpg
ORGANIZER;CN="Melissa Kincaid":MAILTO:melissa.kincaid@kendallelectric.com
GEO:32.4067572;-86.2182565
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Montgomery 1029 Lagoon Business Loop Montgomery AL 36117 United States;X-APPLE-RADIUS=500;X-TITLE=1029 Lagoon Business Loop:geo:-86.2182565,32.4067572
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260518T080000
DTEND;TZID=America/New_York:20260521T163000
DTSTAMP:20260224T153403Z
CREATED:20260224T153403Z
LAST-MODIFIED:20260224T153403Z
UID:10006620-1779091200-1779381000@www.kendallelectric.com
SUMMARY:PLC Wiring & Troubleshooting
DESCRIPTION:Learn how to talk through and troubleshoot PLC ladder logic using Logix5000 software in order to locate a “real” faulty input or output device\, replace it\, and get the process back up and running. It’s all about troubleshooting! \nEach attendee will actually wire the input and output (I/O) field devices to the PLC using their own PLC Trainer! \nSession Topics \n\nEthernet communications set up using RSLinx\nDiscuss the BootP utility using an “out of the box” controller to set the IP address and configuration in RSLinx\nEthernet/IP driver: explain “RSWho views” and RSLinx configuration\nToggling and forcing real and simulated inputs and outputs\nTimers\, Counters\, One-Shot\nCompare blocks\, First-Scan\, Mov/Clr blocks\nMath blocks\, Set Bit Zero/Negative\nJump\, Jump to Subroutine\, Master Control Reset\nOne/two Dimension arrays\, Fill File\, Copy File\, Average File\nBit-Shift Right/Left\, First-In-First-Out\, Load/Unload\nLast-In-First-Out\, Load/Unload\, Masked Move\nSequencer Output using the Array\, Mask\, and Output Tables\nIndirect Addressing\, Add-On Instructions
URL:https://www.kendallelectric.com/event/plc-wiring-troubleshooting-25/
LOCATION:Kendall Electric – Knoxville\, 170 Mabry Hood Road\, Knoxville\, TN\, 37922\, United States
CATEGORIES:Kendall Connected Training,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2026/02/PLC-Trainer-1-scaled.jpg
ORGANIZER;CN="Melissa Kincaid":MAILTO:melissa.kincaid@kendallelectric.com
GEO:35.907472;-84.1186772
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Knoxville 170 Mabry Hood Road Knoxville TN 37922 United States;X-APPLE-RADIUS=500;X-TITLE=170 Mabry Hood Road:geo:-84.1186772,35.907472
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260512T083000
DTEND;TZID=America/Chicago:20260515T163000
DTSTAMP:20260326T132102Z
CREATED:20260116T155704Z
LAST-MODIFIED:20260326T132102Z
UID:10007060-1778574600-1778862600@www.kendallelectric.com
SUMMARY:FactoryTalk View ME & PanelView Plus Programming
DESCRIPTION:CCV204-A presented by Rockwell Automation. \nAfter completing this course\, given a computer with FactoryTalk® View Machine Edition (ME) software and a PanelView™ Plus 7 terminal\, you should be able to produce an operational application running on the terminal. \nDuring class\, you will practice the following hands-on skills: \n\nPrepare a PanelView Plus 7 terminal for operation\nCreate a new application and run it on a terminal\nCreate\, configure\, and animate graphic objects on graphic displays\nConfigure security for granting/restricting access to certain graphic displays or for rights to perform certain actions\nCreate and configure messages and alarms for alerting operators to changes in a process
URL:https://www.kendallelectric.com/event/factorytalk-view-me-panelview-plus-programming-23/
LOCATION:Kendall Electric – Tuscaloosa\, 1323 Whigham Place\, Tuscaloosa\, AL\, 35405\, United States
CATEGORIES:Rockwell Instructor-Led,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Visualization.jpg
ORGANIZER;CN="Melissa Kincaid":MAILTO:melissa.kincaid@kendallelectric.com
GEO:33.1595758;-87.5561027
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Tuscaloosa 1323 Whigham Place Tuscaloosa AL 35405 United States;X-APPLE-RADIUS=500;X-TITLE=1323 Whigham Place:geo:-87.5561027,33.1595758
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260506T090000
DTEND;TZID=America/Chicago:20260508T163000
DTSTAMP:20260219T153328Z
CREATED:20260206T135603Z
LAST-MODIFIED:20260219T153328Z
UID:10007104-1778058000-1778257800@www.kendallelectric.com
SUMMARY:Fundamentals of PowerFlex525 VFD Wiring and Commissioning
DESCRIPTION:Learn how to install\, test\, start-up\, and troubleshoot basic PowerFlex 525 VFD applications.\nLearn how to wire\, program\, and operate Variable Frequency Drives during this three-day course that covers a combination of instructor-led discussions\, demonstrations\, and hands-on labs. \nUsing a VFD workstation\, HMI module and hand-held VFD test module\, students will leave with a better understanding of various control configurations and applications. Students will also test and troubleshoot VFDs using Fluke test and measurement equipment. \nSession Topics: \n\nPowerFlex 525 and 755TS Drive Hands Labs\nTesting VFD Power Components\nAC Motor Fundamentals and Measurements\nInstallation Considerations\nPower and Control Wiring Configurations\nVFD Application Techniques and Parameter Adjustments\nEthernet Communications Configuration\nVoltage and Current Measurements using Fluke VOM® and Clamp Ammeter
URL:https://www.kendallelectric.com/event/fundamentals-of-powerflex525-vfd-wiring-and-comissioning-5/
LOCATION:Kendall Electric – Jackson\, 25 American Drive\, Jackson\, TN\, 38301\, United States
CATEGORIES:Kendall Connected Training,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2025/01/drives-event-image.jpg
ORGANIZER;CN="Melissa Kincaid":MAILTO:melissa.kincaid@kendallelectric.com
GEO:35.6327873;-88.7853842
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Jackson 25 American Drive Jackson TN 38301 United States;X-APPLE-RADIUS=500;X-TITLE=25 American Drive:geo:-88.7853842,35.6327873
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260505T090000
DTEND;TZID=America/Chicago:20260505T163000
DTSTAMP:20260212T152354Z
CREATED:20260206T152853Z
LAST-MODIFIED:20260212T152354Z
UID:10006600-1777971600-1777998600@www.kendallelectric.com
SUMMARY:Rockwell Automation Variable Frequency Drives: Backup\, Replace\, Restore\, and Redeploy
DESCRIPTION:Get hands-on experience returning failed automation equipment back to service. \nDesigned specifically for maintenance personnel and electricians\, this one-day course gives students the opportunity to work with a fully functional automated system that contains all of the target VFDs\, PanelView terminals\, PLCs\, Servos\, & industrial switches. Students will systematically one-by-one backup\, replace\, restore\, and return to service each device using detailed step-by step and pictorially illustrated labs. \nLab manuals included in this course can be used for future reference when replacing equipment on the plant floor. \nProducts covered: \n\nVariable Frequency Drives (VFDs)\n\nPowerFlex 525\, PowerFlex 755\, PowerFlex 527\n\n\nKinetix Servos\n\nKinetix 5300\, Kinetix 5500
URL:https://www.kendallelectric.com/event/rockwell-automation-variable-frequency-drives-backup-replace-restore-and-redeploy-29/
LOCATION:Kendall Electric – Jackson\, 25 American Drive\, Jackson\, TN\, 38301\, United States
CATEGORIES:Kendall Connected Training,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2025/01/drives-event-image.jpg
ORGANIZER;CN="Melissa Kincaid":MAILTO:melissa.kincaid@kendallelectric.com
GEO:35.6327873;-88.7853842
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Jackson 25 American Drive Jackson TN 38301 United States;X-APPLE-RADIUS=500;X-TITLE=25 American Drive:geo:-88.7853842,35.6327873
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260504T090000
DTEND;TZID=America/Chicago:20260504T163000
DTSTAMP:20260422T185006Z
CREATED:20260205T195956Z
LAST-MODIFIED:20260422T185006Z
UID:10007097-1777885200-1777912200@www.kendallelectric.com
SUMMARY:Introduction to PanelView Plus 7
DESCRIPTION:Get hands-on with PanelView Plus 7 HMIs in these 1-day instructor-led training sessions. \nThis one-day technical course focuses on programming and operating the PanelView Plus 7 Graphic Terminal using FactoryTalk View and RSLinx software. Attendees will build a Logix PLC project\, develop multiple PanelView Plus 7 HMI applications\, and bind PLC tags to HMI objects through guided instruction and hands-on labs. The training emphasizes real-world configuration\, navigation\, and feature implementation to support efficient HMI development and deployment. \n\nFlexible – only choose the days you want\nScalable – classes cover various skill levels\nIndividual – students will be provided with individual lab stations
URL:https://www.kendallelectric.com/event/introduction-to-panelview-plus-7-22/
LOCATION:Kendall Electric – Jackson\, 25 American Drive\, Jackson\, TN\, 38301\, United States
CATEGORIES:Kendall Connected Training,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2026/02/PanelView-Plus-7.jpeg
ORGANIZER;CN="Melissa Kincaid":MAILTO:melissa.kincaid@kendallelectric.com
GEO:35.6327873;-88.7853842
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Jackson 25 American Drive Jackson TN 38301 United States;X-APPLE-RADIUS=500;X-TITLE=25 American Drive:geo:-88.7853842,35.6327873
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260421T090000
DTEND;TZID=America/New_York:20260421T110000
DTSTAMP:20260414T145236Z
CREATED:20260414T142057Z
LAST-MODIFIED:20260414T145236Z
UID:10007189-1776762000-1776769200@www.kendallelectric.com
SUMMARY:CompactLogix Product Manager Roundtable
DESCRIPTION:Join us for a Q&A with a Rockwell Automation CompactLogix Product Manager! \nThe Product Manager is responsible for all the CompactLogix design decisions. He can also provide insight into product usage\, applications\, and future features. He is interested in customer feedback and questions much like the Integrator forum we did in Chattanooga with the Logix product group last summer. \nBreakfast will be provided.
URL:https://www.kendallelectric.com/event/compactlogix-product-manager-roundtable/
LOCATION:Kendall Electric – Knoxville\, 170 Mabry Hood Road\, Knoxville\, TN\, 37922\, United States
CATEGORIES:Kendall Technology Update,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2025/10/Modernization-SLC-to-CompactLogix-1600x900-1-e1760475028480.jpeg
ORGANIZER;CN="Melissa Kincaid":MAILTO:melissa.kincaid@kendallelectric.com
GEO:35.907472;-84.1186772
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Knoxville 170 Mabry Hood Road Knoxville TN 37922 United States;X-APPLE-RADIUS=500;X-TITLE=170 Mabry Hood Road:geo:-84.1186772,35.907472
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260416T113000
DTEND;TZID=America/New_York:20260416T124500
DTSTAMP:20260223T194151Z
CREATED:20260223T173658Z
LAST-MODIFIED:20260223T194151Z
UID:10006615-1776339000-1776343500@www.kendallelectric.com
SUMMARY:Rockwell Automation Quarterly Users Group
DESCRIPTION:Join us for an afternoon of sharing with our Kendall Electric Specialists and get the latest Rockwell Automation updates.\nGot a Rockwell Automation project you’re working on? Join our customer community! Share your successes\, learn from others’ experiences\, and maximize your product potential.\nLet’s collaborate! \nAGENDA:\nTechnology Updates with Kendall Specialists\nCustomer Projects Q&A\nGeneral Q & A with Kendall Specialists \nSeating is limited so sign up to reserve your seat today.
URL:https://www.kendallelectric.com/event/rockwell-automation-quarterly-users-group-5/
LOCATION:Kendall Electric – Knoxville\, 170 Mabry Hood Road\, Knoxville\, TN\, 37922\, United States
CATEGORIES:Kendall Technology Update,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2025/03/robot.jpg
ORGANIZER;CN="Melissa Kincaid":MAILTO:melissa.kincaid@kendallelectric.com
GEO:35.907472;-84.1186772
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Knoxville 170 Mabry Hood Road Knoxville TN 37922 United States;X-APPLE-RADIUS=500;X-TITLE=170 Mabry Hood Road:geo:-84.1186772,35.907472
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260323T083000
DTEND;TZID=America/Chicago:20260324T163000
DTSTAMP:20260120T142245Z
CREATED:20250710T202329Z
LAST-MODIFIED:20260120T142245Z
UID:10006940-1774254600-1774369800@www.kendallelectric.com
SUMMARY:Essentials of Industrial Ethernet Networks for an OT Professional
DESCRIPTION:CCP182 presented by Rockwell Automation. \nAfter completing this course\, you should be able to: \n\nDemonstrate understanding of basic Ethernet networking skills\, terminology\, and concepts\nApply these skills when performing advanced network specification\, configuration\, and troubleshooting tasks\n\nIn this course\, you will learn how to verify communications between devices\, recognize data transmission types\, and differentiate between OSI Model Layer 2 and Layer 3 switching functions. You will also identify the routing process\, monitor a switch using Device Manager and CLI commands\, and work with IOS configuration files. \nThis course prepares you to more clearly understand key IT terms and concepts for communicating with other professionals on Connected Enterprise projects.
URL:https://www.kendallelectric.com/event/essentials-of-industrial-ethernet-networks-for-an-ot-professional-10/
LOCATION:Kendall Electric – Jackson\, 25 American Drive\, Jackson\, TN\, 38301\, United States
CATEGORIES:Rockwell Instructor-Led,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Networking.jpg
ORGANIZER;CN="Melissa Kincaid":MAILTO:melissa.kincaid@kendallelectric.com
GEO:35.6327873;-88.7853842
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Jackson 25 American Drive Jackson TN 38301 United States;X-APPLE-RADIUS=500;X-TITLE=25 American Drive:geo:-88.7853842,35.6327873
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260309T123000
DTEND;TZID=America/New_York:20260313T163000
DTSTAMP:20260102T170017Z
CREATED:20250710T201813Z
LAST-MODIFIED:20260102T170017Z
UID:10006937-1773059400-1773419400@www.kendallelectric.com
SUMMARY:Studio 5000 Logix Designer Level 1: ControlLogix Fundamentals and Troubleshooting
DESCRIPTION:CCP299 presented by Rockwell Automation. \nUpon completion of this course\, you should be able to troubleshoot a previously operational ControlLogix® system and restore normal operation. \nYou will have the opportunity to develop and practice these skills by: \n\nLearning basic concepts and terminology used with:\n\nControlLogix system hardware\nStudio 5000 Logix Designer® application\n\n\nPracticing a systematic strategy for diagnosing and troubleshooting problems:\n\nConfiguration issues\nElectrical noise\nFaulty/malfunctioning field devices\nController I/O\, or other hardware issues\n\n\nPerforming hands-on exercises
URL:https://www.kendallelectric.com/event/studio-5000-logix-designer-level-1-controllogix-fundamentals-and-troubleshooting-37/
LOCATION:Kendall Electric – Chattanooga\, 6233 Airpark Drive\, Chattanooga\, TN\, 37421\, United States
CATEGORIES:Rockwell Instructor-Led,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Software.jpg
ORGANIZER;CN="Melissa Kincaid":MAILTO:melissa.kincaid@kendallelectric.com
GEO:35.0354726;-85.1861614
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Chattanooga 6233 Airpark Drive Chattanooga TN 37421 United States;X-APPLE-RADIUS=500;X-TITLE=6233 Airpark Drive:geo:-85.1861614,35.0354726
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260303T080000
DTEND;TZID=America/New_York:20260306T163000
DTSTAMP:20260224T150713Z
CREATED:20251007T195921Z
LAST-MODIFIED:20260224T150713Z
UID:10006997-1772524800-1772814600@www.kendallelectric.com
SUMMARY:PLC Wiring & Troubleshooting
DESCRIPTION:Learn how to talk through and troubleshoot PLC ladder logic using Logix5000 software in order to locate a “real” faulty input or output device\, replace it\, and get the process back up and running. It’s all about troubleshooting! \nEach attendee will actually wire the input and output (I/O) field devices to the PLC using their own PLC Trainer! \nSession Topics \n\nEthernet communications set up using RSLinx\nDiscuss the BootP utility using an “out of the box” controller to set the IP address and configuration in RSLinx\nEthernet/IP driver: explain “RSWho views” and RSLinx configuration\nToggling and forcing real and simulated inputs and outputs\nTimers\, Counters\, One-Shot\nCompare blocks\, First-Scan\, Mov/Clr blocks\nMath blocks\, Set Bit Zero/Negative\nJump\, Jump to Subroutine\, Master Control Reset\nOne/two Dimension arrays\, Fill File\, Copy File\, Average File\nBit-Shift Right/Left\, First-In-First-Out\, Load/Unload\nLast-In-First-Out\, Load/Unload\, Masked Move\nSequencer Output using the Array\, Mask\, and Output Tables\nIndirect Addressing\, Add-On Instructions
URL:https://www.kendallelectric.com/event/plc-wiring-troubleshooting-21/
LOCATION:Kendall Electric – Kingsport\, 1241 Jan Way\, Kingsport\, TN\, 37660\, United States
CATEGORIES:Kendall Connected Training,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2026/02/PLC-Trainer-1-scaled.jpg
ORGANIZER;CN="Melissa Kincaid":MAILTO:melissa.kincaid@kendallelectric.com
GEO:36.5179745;-82.5598666
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Kingsport 1241 Jan Way Kingsport TN 37660 United States;X-APPLE-RADIUS=500;X-TITLE=1241 Jan Way:geo:-82.5598666,36.5179745
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260217T083000
DTEND;TZID=America/Chicago:20260219T163000
DTSTAMP:20260102T170103Z
CREATED:20250710T200432Z
LAST-MODIFIED:20260102T170103Z
UID:10006934-1771317000-1771518600@www.kendallelectric.com
SUMMARY:PowerFlex 750 Series Configuration\, Startup\, Maintenance\, and Troubleshooting
DESCRIPTION:DRV215 presented by Rockwell Automation. \nUpon completion of this course\, given a wired PowerFlex® 750-Series drive (PowerFlex 753 or PowerFlex 755) and AC motor\, you will be able to install the drive correctly\, start it up\, and configure drive parameters to meet application-specific needs. \nThe course also introduces concepts and techniques that will assist you in successfully maintaining and troubleshooting the drive\, recognizing PowerFlex 750-Series drive hardware\, and diagnosing specific faults. Throughout the course\, you will have the chance to use a variety of hardware and software tools\, including: The A6 LCD HIMConnected Components Workbench™ software DriveExecutive™ software \nAfter each demonstration\, you will be given exercises that offer extensive hands-on practice using a PowerFlex 753 or PowerFlex 755 drive. \nThis three-day course can be taken as a standalone course\, or it can be taken in conjunction with other courses in the PowerFlex 7-Class curriculum to broaden skills development further.
URL:https://www.kendallelectric.com/event/powerflex-750-series-configuration-startup-maintenance-and-troubleshooting-3/
LOCATION:Kendall Electric – Jackson\, 25 American Drive\, Jackson\, TN\, 38301\, United States
CATEGORIES:Rockwell Instructor-Led,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Drives.jpg
ORGANIZER;CN="Melissa Kincaid":MAILTO:melissa.kincaid@kendallelectric.com
GEO:35.6327873;-88.7853842
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Jackson 25 American Drive Jackson TN 38301 United States;X-APPLE-RADIUS=500;X-TITLE=25 American Drive:geo:-88.7853842,35.6327873
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260217T080000
DTEND;TZID=America/New_York:20260220T163000
DTSTAMP:20260224T150816Z
CREATED:20251007T195556Z
LAST-MODIFIED:20260224T150816Z
UID:10006996-1771315200-1771605000@www.kendallelectric.com
SUMMARY:PLC Wiring & Troubleshooting
DESCRIPTION:Learn how to talk through and troubleshoot PLC ladder logic using Logix5000 software in order to locate a “real” faulty input or output device\, replace it\, and get the process back up and running. It’s all about troubleshooting! \nEach attendee will actually wire the input and output (I/O) field devices to the PLC using their own PLC Trainer! \nSession Topics \n\nEthernet communications set up using RSLinx\nDiscuss the BootP utility using an “out of the box” controller to set the IP address and configuration in RSLinx\nEthernet/IP driver: explain “RSWho views” and RSLinx configuration\nToggling and forcing real and simulated inputs and outputs\nTimers\, Counters\, One-Shot\nCompare blocks\, First-Scan\, Mov/Clr blocks\nMath blocks\, Set Bit Zero/Negative\nJump\, Jump to Subroutine\, Master Control Reset\nOne/two Dimension arrays\, Fill File\, Copy File\, Average File\nBit-Shift Right/Left\, First-In-First-Out\, Load/Unload\nLast-In-First-Out\, Load/Unload\, Masked Move\nSequencer Output using the Array\, Mask\, and Output Tables\nIndirect Addressing\, Add-On Instructions
URL:https://www.kendallelectric.com/event/plc-wiring-troubleshooting-20/
LOCATION:Kendall Electric – Irondale\, 1189 Grants Mill Road\, Irondale\, AL\, 35210\, United States
CATEGORIES:Kendall Connected Training,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2026/02/PLC-Trainer-1-scaled.jpg
ORGANIZER;CN="Melissa Kincaid":MAILTO:melissa.kincaid@kendallelectric.com
GEO:33.5332527;-86.6836318
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Irondale 1189 Grants Mill Road Irondale AL 35210 United States;X-APPLE-RADIUS=500;X-TITLE=1189 Grants Mill Road:geo:-86.6836318,33.5332527
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260209T083000
DTEND;TZID=America/New_York:20260213T163000
DTSTAMP:20260120T142921Z
CREATED:20250710T195303Z
LAST-MODIFIED:20260120T142921Z
UID:10006933-1770625800-1771000200@www.kendallelectric.com
SUMMARY:Accelerated Logix5000 Programmer Certificate Level 1
DESCRIPTION:CCP250 presented by Rockwell Automation. \nThis accelerated course is for individuals who can quickly learn and apply Logix5000™ concepts\, terminology\, hardware\, and the Studio 5000 Logix Designer® programming environment. You will quickly move from these early concepts to using producer/ consumer technology and messages to multicast input and output devices\, share data between controllers\, and control remote I/O. \nThis course prepares you for the Accelerated Logix5000 Programmer Certificate Course Level 1 certificate exam\, which is included in the course price. Upon completion of this course\, given a functional specification for a Logix5000 application\, you should be able to develop a project to meet the specification requirements. \nThis course covers tasks common to the following hardware\, which use the Logix5000 control engine\, or operating system: \n\nControlLogix® controllers\nCompactLogix™ controllers\n\nThese tasks include creating a new project\, programming an application\, and adding advanced functionality (e.g. data arrays\, add-on instructions\, produced/consumed data\, and messages) to the application.
URL:https://www.kendallelectric.com/event/accelerated-logix5000-programmer-certificate-level-1-9/
LOCATION:Kendall Electric – Knoxville\, 170 Mabry Hood Road\, Knoxville\, TN\, 37922\, United States
CATEGORIES:Rockwell Instructor-Led,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Software.jpg
ORGANIZER;CN="Melissa Kincaid":MAILTO:melissa.kincaid@kendallelectric.com
GEO:35.907472;-84.1186772
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Knoxville 170 Mabry Hood Road Knoxville TN 37922 United States;X-APPLE-RADIUS=500;X-TITLE=170 Mabry Hood Road:geo:-84.1186772,35.907472
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260203T080000
DTEND;TZID=America/New_York:20260206T163000
DTSTAMP:20251007T195206Z
CREATED:20251007T195206Z
LAST-MODIFIED:20251007T195206Z
UID:10006995-1770105600-1770395400@www.kendallelectric.com
SUMMARY:PLC Wiring & Troubleshooting
DESCRIPTION:Learn how to talk through and troubleshoot PLC ladder logic using Logix5000 software in order to locate a “real” faulty input or output device\, replace it\, and get the process back up and running. It’s all about troubleshooting! \nEach attendee will actually wire the input and output (I/O) field devices to the PLC using their own PLC Trainer! \nSession Topics \n\nEthernet communications set up using RSLinx\nDiscuss the BootP utility using an “out of the box” controller to set the IP address and configuration in RSLinx\nEthernet/IP driver: explain “RSWho views” and RSLinx configuration\nToggling and forcing real and simulated inputs and outputs\nTimers\, Counters\, One-Shot\nCompare blocks\, First-Scan\, Mov/Clr blocks\nMath blocks\, Set Bit Zero/Negative\nJump\, Jump to Subroutine\, Master Control Reset\nOne/two Dimension arrays\, Fill File\, Copy File\, Average File\nBit-Shift Right/Left\, First-In-First-Out\, Load/Unload\nLast-In-First-Out\, Load/Unload\, Masked Move\nSequencer Output using the Array\, Mask\, and Output Tables\nIndirect Addressing\, Add-On Instructions
URL:https://www.kendallelectric.com/event/plc-wiring-troubleshooting-19/
LOCATION:Kendall Electric – Knoxville\, 170 Mabry Hood Road\, Knoxville\, TN\, 37922\, United States
CATEGORIES:Kendall Connected Training,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2024/08/Workstation_Micro820-PLC-scaled.jpg
ORGANIZER;CN="Melissa Kincaid":MAILTO:melissa.kincaid@kendallelectric.com
GEO:35.907472;-84.1186772
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Knoxville 170 Mabry Hood Road Knoxville TN 37922 United States;X-APPLE-RADIUS=500;X-TITLE=170 Mabry Hood Road:geo:-84.1186772,35.907472
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260128T090000
DTEND;TZID=America/Chicago:20260130T163000
DTSTAMP:20250807T160345Z
CREATED:20250807T160345Z
LAST-MODIFIED:20250807T160345Z
UID:10006966-1769590800-1769790600@www.kendallelectric.com
SUMMARY:Fundamentals of PowerFlex 525 VFD Wiring & Commissioning
DESCRIPTION:Learn how to install\, test\, start-up\, and troubleshoot basic PowerFlex 525 VFD applications. \nLearn how to wire\, program\, and operate Variable Frequency Drives during this three-day course that covers a combination of instructor-led discussions\, demonstrations\, and hands-on labs. \nUsing a VFD workstation\, HMI module and hand-held VFD test module\, students will leave with a better understanding of various control configurations and applications. Students will also test and troubleshoot VFDs using Fluke test and measurement equipment. \nSession topics: \n\nVFD Power and Control Fundamentals\nTesting VFD Power Components\nAC Motor Fundamentals and Measurements\nInstallation Considerations\nPower and Control Wiring Configurations\nVFD Application Techniques and Parameter Adjustments\nEthernet Communications Configuration\nVoltage and Current Measurements using Fluke VOM® and Clamp Ammeter
URL:https://www.kendallelectric.com/event/fundamentals-of-powerflex-525-vfd-wiring-commissioning-17/
LOCATION:Kendall Electric – Knoxville\, 170 Mabry Hood Road\, Knoxville\, TN\, 37922\, United States
CATEGORIES:Kendall Connected Training,South Central
ORGANIZER;CN="Melissa Kincaid":MAILTO:melissa.kincaid@kendallelectric.com
GEO:35.907472;-84.1186772
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Knoxville 170 Mabry Hood Road Knoxville TN 37922 United States;X-APPLE-RADIUS=500;X-TITLE=170 Mabry Hood Road:geo:-84.1186772,35.907472
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260127T090000
DTEND;TZID=America/Chicago:20260127T163000
DTSTAMP:20251105T185806Z
CREATED:20250807T152353Z
LAST-MODIFIED:20251105T185806Z
UID:10006449-1769504400-1769531400@www.kendallelectric.com
SUMMARY:Rockwell Automation variable frequency drives: backup\, replace\, restore\, and redeploy
DESCRIPTION:Get hands-on experience returning failed automation equipment back to service. \nDesigned specifically for maintenance personnel and electricians\, this one-day course gives students the opportunity to work with a fully functional automated system that contains all of the target VFDs\, PanelView terminals\, PLCs\, Servos\, & industrial switches. Students will systematically one-by-one backup\, replace\, restore\, and return to service each device using detailed step-by step and pictorially illustrated labs. \nLab manuals included in this course can be used for future reference when replacing equipment on the plant floor. \nProducts covered: \nVariable Frequency Drives (VFDs)\nPowerFlex 525\, PowerFlex 755\, PowerFlex 527\nKinetix Servos\nKinetix 5300\, Kinetix 5500
URL:https://www.kendallelectric.com/event/rockwell-automation-variable-frequency-drives-backup-replace-restore-and-redeploy-15/
LOCATION:Kendall Electric – Knoxville\, 170 Mabry Hood Road\, Knoxville\, TN\, 37922\, United States
CATEGORIES:Kendall Connected Training,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2025/01/drives-event-image.jpg
ORGANIZER;CN="Melissa Kincaid":MAILTO:melissa.kincaid@kendallelectric.com
GEO:35.907472;-84.1186772
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Knoxville 170 Mabry Hood Road Knoxville TN 37922 United States;X-APPLE-RADIUS=500;X-TITLE=170 Mabry Hood Road:geo:-84.1186772,35.907472
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260126T090000
DTEND;TZID=America/Chicago:20260126T163000
DTSTAMP:20250807T162248Z
CREATED:20250807T144212Z
LAST-MODIFIED:20250807T162248Z
UID:10006446-1769418000-1769445000@www.kendallelectric.com
SUMMARY:Intro to Logix Training
DESCRIPTION:Get hands-on with Logix in these 1-day instructor-led training sessions. \n\nFlexible – only choose the days you want\nScalable – classes cover various skill levels\nIndividual – students will be provided with individual lab stations\n\nSessions available \n\nIntro to Logix\nIntermediate Logix\nAdvanced Logix\nLogix PID\nLogix Troubleshooting
URL:https://www.kendallelectric.com/event/intro-to-logix-training-3/
LOCATION:Kendall Electric – Knoxville\, 170 Mabry Hood Road\, Knoxville\, TN\, 37922\, United States
CATEGORIES:Kendall Connected Training,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_KCT_Logix.jpg
ORGANIZER;CN="Melissa Kincaid":MAILTO:melissa.kincaid@kendallelectric.com
GEO:35.907472;-84.1186772
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Knoxville 170 Mabry Hood Road Knoxville TN 37922 United States;X-APPLE-RADIUS=500;X-TITLE=170 Mabry Hood Road:geo:-84.1186772,35.907472
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260120T083000
DTEND;TZID=America/New_York:20260121T163000
DTSTAMP:20260102T170126Z
CREATED:20250710T195138Z
LAST-MODIFIED:20260102T170126Z
UID:10006932-1768897800-1769013000@www.kendallelectric.com
SUMMARY:Studio 5000:  Logix Designer Level 3:  Basic Ladder Logic Interpretation
DESCRIPTION:CCCL21 presented by Rockwell Automation. \nThis course is a skill-building course that provides you with a more detailed understanding of Studio 5000 LogixDesigner® ladder logic instructions and terminology. This course also provides you with the resources and hands-on practice required to interpret ladder logic instructions for any Logix5000™ controller. \nYou will have an opportunity to use the Logix Designer application to perform basic software tasks to meet the requirements of a given functional specification. In addition to using ladder logic\, you will be introduced to ladder logic techniques\, established standards\, and common rules for interpreting ladder logic.
URL:https://www.kendallelectric.com/event/studio-5000-logix-designer-level-3-basic-ladder-logic-interpretation-2/
LOCATION:Kendall Electric – Knoxville\, 170 Mabry Hood Road\, Knoxville\, TN\, 37922\, United States
CATEGORIES:Rockwell Instructor-Led,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Software.jpg
ORGANIZER;CN="Melissa Kincaid":MAILTO:melissa.kincaid@kendallelectric.com
GEO:35.907472;-84.1186772
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Knoxville 170 Mabry Hood Road Knoxville TN 37922 United States;X-APPLE-RADIUS=500;X-TITLE=170 Mabry Hood Road:geo:-84.1186772,35.907472
END:VEVENT
END:VCALENDAR