BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//Kendall Electric - ECPv6.17.1//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-ORIGINAL-URL:https://www.kendallelectric.com
X-WR-CALDESC:Events for Kendall Electric
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:America/Chicago
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20230312T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20231105T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20240310T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20241103T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20250309T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20251102T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20260308T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20261101T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20270314T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20271107T070000
END:STANDARD
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:America/New_York
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20240310T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20241103T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20250309T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20251102T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20260308T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20261101T060000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260714T083000
DTEND;TZID=America/Chicago:20260717T163000
DTSTAMP:20260326T133256Z
CREATED:20260114T211912Z
LAST-MODIFIED:20260326T133256Z
UID:10007054-1784017800-1784305800@www.kendallelectric.com
SUMMARY:Studio 5000™ Logix Designer Level 3: Project Development
DESCRIPTION:CCP143 presented by Rockwell Automation. \nUpon completion of this course\, given a functional specification for a Logix5000™ application\, you should be able to develop a project to meet the specification requirements. \nThis course covers tasks common to the following hardware\, which all use the Logix5000 control engine: \n\nControlLogix® controllers\nCompactLogix™ controllers\nSoftLogix™ controllers\n\nThis course builds upon your knowledge of common controller terms and operation and your experience with basic ladder logic programming. You can gain a deeper understanding of project development tasks that are common to all Logix5000 controllers. Such tasks include organizing tasks and routines\, organizing controller data\, configuring modules\, and sharing data. You will also use producer/consumer technology for multicasting to input and output devices\, sharing data between controllers\, and controlling remote I/O.
URL:https://www.kendallelectric.com/event/studio-5000-logix-designer-level-3-project-development-22/
LOCATION:Kendall Electric – Jackson\, 25 American Drive\, Jackson\, TN\, 38301\, United States
CATEGORIES:Rockwell Instructor-Led,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Software.jpg
ORGANIZER;CN="Melissa Kincaid":MAILTO:melissa.kincaid@kendallelectric.com
GEO:35.6327873;-88.7853842
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Jackson 25 American Drive Jackson TN 38301 United States;X-APPLE-RADIUS=500;X-TITLE=25 American Drive:geo:-88.7853842,35.6327873
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260701T090000
DTEND;TZID=America/Chicago:20260701T130000
DTSTAMP:20260422T190415Z
CREATED:20260422T180609Z
LAST-MODIFIED:20260422T190415Z
UID:10007191-1782896400-1782910800@www.kendallelectric.com
SUMMARY:Rockwell Automation EtherNet/IP In-Cabinet
DESCRIPTION:Reduce build time and implementation risk while advancing your capabilities in panel design. Gain hands-on experience with Rockwell Automation’s new EtherNet/IP™ In-Cabinet technology and learn how to connect motor starters and push button operators directly to the network\, simplify wiring\, and turn these in-cabinet devices into data-rich assets. Walk away with practical design insight and skills that support more reliable systems\, faster startup\, easier troubleshooting\, and reduced downtime.
URL:https://www.kendallelectric.com/event/rockwell-automation-in-cabinet-ethernet-ip/
LOCATION:Kendall Electric – Jackson\, 25 American Drive\, Jackson\, TN\, 38301\, United States
CATEGORIES:Kendall Technology Update,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/06/web_network-switch-ethernet-cables-data-center-concept.jpg
ORGANIZER;CN="Jason Lowery":MAILTO:Jason.Lowery@kendallelectric.com
GEO:35.6327873;-88.7853842
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Jackson 25 American Drive Jackson TN 38301 United States;X-APPLE-RADIUS=500;X-TITLE=25 American Drive:geo:-88.7853842,35.6327873
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260616T083000
DTEND;TZID=America/Chicago:20260618T163000
DTSTAMP:20260326T133114Z
CREATED:20260114T210724Z
LAST-MODIFIED:20260326T133114Z
UID:10007052-1781598600-1781800200@www.kendallelectric.com
SUMMARY:Motion Control Fundamentals Using Kinetix 5700 (CIP) Servo Drives
DESCRIPTION:CCN132 presented by Rockwell Automation. \nUpon completion of this course\, you should be able to demonstrate fundamental motion control concepts common to all Rockwell Automation motion control systems. \nThis course is designed to provide you with an understanding of the concepts\, terminology\, functionality\, and applications of motion control. This course will also allow you to establish the foundation you need before learning the skills necessary to maintain and program motion control systems. \nThis course does not address motion control system design or specific motion control software programming. If you are seeking training in these areas\, you should enroll in the relevant Rockwell Automation training courses\, making sure you have fulfilled the prerequisites for those courses prior to enrollment.
URL:https://www.kendallelectric.com/event/motion-control-fundamentals-using-kinetix-5700-cip-servo-drives-10/
LOCATION:Kendall Electric – Jackson\, 25 American Drive\, Jackson\, TN\, 38301\, United States
CATEGORIES:Rockwell Instructor-Led,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Motion-Control.jpg
ORGANIZER;CN="Melissa Kincaid":MAILTO:melissa.kincaid@kendallelectric.com
GEO:35.6327873;-88.7853842
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Jackson 25 American Drive Jackson TN 38301 United States;X-APPLE-RADIUS=500;X-TITLE=25 American Drive:geo:-88.7853842,35.6327873
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260609T090000
DTEND;TZID=America/Chicago:20260609T143000
DTSTAMP:20260406T215035Z
CREATED:20260406T212122Z
LAST-MODIFIED:20260406T215035Z
UID:10007161-1780995600-1781015400@www.kendallelectric.com
SUMMARY:Advanced Shift into Stratix
DESCRIPTION:Go beyond basic configuration with this advanced fundamentals\, hands-on lab and capstone experience. Learn to build and validate a resilient industrial network that improves uptime\, increases throughput without new hardware\, and reduces security risk by addressing key Stratix® 5200 behavior changes versus legacy platforms.
URL:https://www.kendallelectric.com/event/advanced-shift-into-stratix-3/
LOCATION:Kendall Electric – Jackson\, 25 American Drive\, Jackson\, TN\, 38301\, United States
CATEGORIES:Kendall Technology Update,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_KCT_Stratix2.jpg
ORGANIZER;CN="Jeffrey McKee":MAILTO:jeffrey.mckee@kendallelectric.com
GEO:35.6327873;-88.7853842
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Jackson 25 American Drive Jackson TN 38301 United States;X-APPLE-RADIUS=500;X-TITLE=25 American Drive:geo:-88.7853842,35.6327873
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260527T083000
DTEND;TZID=America/Chicago:20260529T163000
DTSTAMP:20260326T132757Z
CREATED:20260119T162735Z
LAST-MODIFIED:20260326T132757Z
UID:10006550-1779870600-1780072200@www.kendallelectric.com
SUMMARY:GuardLogix Application Development and Troubleshooting
DESCRIPTION:SAF-LOG104 presented by Rockwell Automation. \nUpon completion of this course\, you will be able to create a Studio 5000 Logix Designer® project for a GuardLogix® system and troubleshoot a previously operational GuardLogix system. \nYou will have the opportunity to develop and practice these skills by: \n\nLearning GuardLogix concepts and terminology\nCreating and configuring a GuardLogix project:\nAdding and configuring CompactBlock™ Guard I/O™ and POINT Guard I/O™ safety modules:\nGenerating Safety Signatures and locking/unlocking a GuardLogix controller\nProgramming safety instructions\nTroubleshooting a GuardLogix project
URL:https://www.kendallelectric.com/event/guardlogix-application-development-and-troubleshooting-21/
LOCATION:Kendall Electric – Jackson\, 25 American Drive\, Jackson\, TN\, 38301\, United States
CATEGORIES:Rockwell Instructor-Led,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Safety.jpg
ORGANIZER;CN="Melissa Kincaid":MAILTO:melissa.kincaid@kendallelectric.com
GEO:35.6327873;-88.7853842
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Jackson 25 American Drive Jackson TN 38301 United States;X-APPLE-RADIUS=500;X-TITLE=25 American Drive:geo:-88.7853842,35.6327873
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260521T130000
DTEND;TZID=America/Chicago:20260521T163000
DTSTAMP:20260406T204537Z
CREATED:20260406T204537Z
LAST-MODIFIED:20260406T204537Z
UID:10006641-1779368400-1779381000@www.kendallelectric.com
SUMMARY:Mechatronics Headquarters
DESCRIPTION:Step into the lab with Kendall Electric and drive your motion-control momentum. Spend a day getting hands-on with real hardware and demo boxes that turn complex concepts into practical know-how. You’ll fast-track your understanding\, explore cutting-edge mechatronics technologies\, and build a rock-solid foundation in motion control.
URL:https://www.kendallelectric.com/event/mechatronics-headquarters/
LOCATION:Kendall Electric – Jackson\, 25 American Drive\, Jackson\, TN\, 38301\, United States
CATEGORIES:Kendall Technology Update,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2024/01/Mechatronics-feature-image-01.jpg
ORGANIZER;CN="Jeremy Smith":MAILTO:Jeremy.Smith1@kendallelectric.com
GEO:35.6327873;-88.7853842
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Jackson 25 American Drive Jackson TN 38301 United States;X-APPLE-RADIUS=500;X-TITLE=25 American Drive:geo:-88.7853842,35.6327873
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260521T080000
DTEND;TZID=America/Chicago:20260521T113000
DTSTAMP:20260406T205300Z
CREATED:20260406T205300Z
LAST-MODIFIED:20260406T205300Z
UID:10006642-1779350400-1779363000@www.kendallelectric.com
SUMMARY:Mechatronics Headquarters
DESCRIPTION:Step into the lab with Kendall Electric and drive your motion-control momentum. Spend a day getting hands-on with real hardware and demo boxes that turn complex concepts into practical know-how. You’ll fast-track your understanding\, explore cutting-edge mechatronics technologies\, and build a rock-solid foundation in motion control.
URL:https://www.kendallelectric.com/event/mechatronics-headquarters-2/
LOCATION:Kendall Electric – Jackson\, 25 American Drive\, Jackson\, TN\, 38301\, United States
CATEGORIES:Kendall Technology Update,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2024/01/Mechatronics-feature-image-01.jpg
ORGANIZER;CN="Jeremy Smith":MAILTO:Jeremy.Smith1@kendallelectric.com
GEO:35.6327873;-88.7853842
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Jackson 25 American Drive Jackson TN 38301 United States;X-APPLE-RADIUS=500;X-TITLE=25 American Drive:geo:-88.7853842,35.6327873
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260506T090000
DTEND;TZID=America/Chicago:20260508T163000
DTSTAMP:20260219T153328Z
CREATED:20260206T135603Z
LAST-MODIFIED:20260219T153328Z
UID:10007104-1778058000-1778257800@www.kendallelectric.com
SUMMARY:Fundamentals of PowerFlex525 VFD Wiring and Commissioning
DESCRIPTION:Learn how to install\, test\, start-up\, and troubleshoot basic PowerFlex 525 VFD applications.\nLearn how to wire\, program\, and operate Variable Frequency Drives during this three-day course that covers a combination of instructor-led discussions\, demonstrations\, and hands-on labs. \nUsing a VFD workstation\, HMI module and hand-held VFD test module\, students will leave with a better understanding of various control configurations and applications. Students will also test and troubleshoot VFDs using Fluke test and measurement equipment. \nSession Topics: \n\nPowerFlex 525 and 755TS Drive Hands Labs\nTesting VFD Power Components\nAC Motor Fundamentals and Measurements\nInstallation Considerations\nPower and Control Wiring Configurations\nVFD Application Techniques and Parameter Adjustments\nEthernet Communications Configuration\nVoltage and Current Measurements using Fluke VOM® and Clamp Ammeter
URL:https://www.kendallelectric.com/event/fundamentals-of-powerflex525-vfd-wiring-and-comissioning-5/
LOCATION:Kendall Electric – Jackson\, 25 American Drive\, Jackson\, TN\, 38301\, United States
CATEGORIES:Kendall Connected Training,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2025/01/drives-event-image.jpg
ORGANIZER;CN="Melissa Kincaid":MAILTO:melissa.kincaid@kendallelectric.com
GEO:35.6327873;-88.7853842
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Jackson 25 American Drive Jackson TN 38301 United States;X-APPLE-RADIUS=500;X-TITLE=25 American Drive:geo:-88.7853842,35.6327873
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260505T090000
DTEND;TZID=America/Chicago:20260505T163000
DTSTAMP:20260212T152354Z
CREATED:20260206T152853Z
LAST-MODIFIED:20260212T152354Z
UID:10006600-1777971600-1777998600@www.kendallelectric.com
SUMMARY:Rockwell Automation Variable Frequency Drives: Backup\, Replace\, Restore\, and Redeploy
DESCRIPTION:Get hands-on experience returning failed automation equipment back to service. \nDesigned specifically for maintenance personnel and electricians\, this one-day course gives students the opportunity to work with a fully functional automated system that contains all of the target VFDs\, PanelView terminals\, PLCs\, Servos\, & industrial switches. Students will systematically one-by-one backup\, replace\, restore\, and return to service each device using detailed step-by step and pictorially illustrated labs. \nLab manuals included in this course can be used for future reference when replacing equipment on the plant floor. \nProducts covered: \n\nVariable Frequency Drives (VFDs)\n\nPowerFlex 525\, PowerFlex 755\, PowerFlex 527\n\n\nKinetix Servos\n\nKinetix 5300\, Kinetix 5500
URL:https://www.kendallelectric.com/event/rockwell-automation-variable-frequency-drives-backup-replace-restore-and-redeploy-29/
LOCATION:Kendall Electric – Jackson\, 25 American Drive\, Jackson\, TN\, 38301\, United States
CATEGORIES:Kendall Connected Training,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2025/01/drives-event-image.jpg
ORGANIZER;CN="Melissa Kincaid":MAILTO:melissa.kincaid@kendallelectric.com
GEO:35.6327873;-88.7853842
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Jackson 25 American Drive Jackson TN 38301 United States;X-APPLE-RADIUS=500;X-TITLE=25 American Drive:geo:-88.7853842,35.6327873
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260504T090000
DTEND;TZID=America/Chicago:20260504T163000
DTSTAMP:20260422T185006Z
CREATED:20260205T195956Z
LAST-MODIFIED:20260422T185006Z
UID:10007097-1777885200-1777912200@www.kendallelectric.com
SUMMARY:Introduction to PanelView Plus 7
DESCRIPTION:Get hands-on with PanelView Plus 7 HMIs in these 1-day instructor-led training sessions. \nThis one-day technical course focuses on programming and operating the PanelView Plus 7 Graphic Terminal using FactoryTalk View and RSLinx software. Attendees will build a Logix PLC project\, develop multiple PanelView Plus 7 HMI applications\, and bind PLC tags to HMI objects through guided instruction and hands-on labs. The training emphasizes real-world configuration\, navigation\, and feature implementation to support efficient HMI development and deployment. \n\nFlexible – only choose the days you want\nScalable – classes cover various skill levels\nIndividual – students will be provided with individual lab stations
URL:https://www.kendallelectric.com/event/introduction-to-panelview-plus-7-22/
LOCATION:Kendall Electric – Jackson\, 25 American Drive\, Jackson\, TN\, 38301\, United States
CATEGORIES:Kendall Connected Training,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2026/02/PanelView-Plus-7.jpeg
ORGANIZER;CN="Melissa Kincaid":MAILTO:melissa.kincaid@kendallelectric.com
GEO:35.6327873;-88.7853842
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Jackson 25 American Drive Jackson TN 38301 United States;X-APPLE-RADIUS=500;X-TITLE=25 American Drive:geo:-88.7853842,35.6327873
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260323T083000
DTEND;TZID=America/Chicago:20260324T163000
DTSTAMP:20260120T142245Z
CREATED:20250710T202329Z
LAST-MODIFIED:20260120T142245Z
UID:10006940-1774254600-1774369800@www.kendallelectric.com
SUMMARY:Essentials of Industrial Ethernet Networks for an OT Professional
DESCRIPTION:CCP182 presented by Rockwell Automation. \nAfter completing this course\, you should be able to: \n\nDemonstrate understanding of basic Ethernet networking skills\, terminology\, and concepts\nApply these skills when performing advanced network specification\, configuration\, and troubleshooting tasks\n\nIn this course\, you will learn how to verify communications between devices\, recognize data transmission types\, and differentiate between OSI Model Layer 2 and Layer 3 switching functions. You will also identify the routing process\, monitor a switch using Device Manager and CLI commands\, and work with IOS configuration files. \nThis course prepares you to more clearly understand key IT terms and concepts for communicating with other professionals on Connected Enterprise projects.
URL:https://www.kendallelectric.com/event/essentials-of-industrial-ethernet-networks-for-an-ot-professional-10/
LOCATION:Kendall Electric – Jackson\, 25 American Drive\, Jackson\, TN\, 38301\, United States
CATEGORIES:Rockwell Instructor-Led,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Networking.jpg
ORGANIZER;CN="Melissa Kincaid":MAILTO:melissa.kincaid@kendallelectric.com
GEO:35.6327873;-88.7853842
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Jackson 25 American Drive Jackson TN 38301 United States;X-APPLE-RADIUS=500;X-TITLE=25 American Drive:geo:-88.7853842,35.6327873
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260310T090000
DTEND;TZID=America/Chicago:20260310T153000
DTSTAMP:20260206T140955Z
CREATED:20260121T194440Z
LAST-MODIFIED:20260206T140955Z
UID:10007089-1773133200-1773156600@www.kendallelectric.com
SUMMARY:Drives Headquarters (DHQ)
DESCRIPTION:Accelerate your expertise with live\, hands-on training that takes you from foundational skills to advanced capability on PowerFlex AC drives.Build practical proficiency in drive configuration\, programming\, and network safety on the PowerFlex 525 and PowerFlex 755TS. Strengthen your skillset\, sharpen your troubleshooting confidence\, and be empowered to deliver safer\, more reliable\, and more efficient systems. \nRecharge with a provided lunch during the training.
URL:https://www.kendallelectric.com/event/drives-headquarters-dhq-8/
LOCATION:Kendall Electric – Jackson\, 25 American Drive\, Jackson\, TN\, 38301\, United States
CATEGORIES:Kendall Technology Update,South Central
ATTACH;FMTTYPE=image/png:https://www.kendallelectric.com/wp-content/uploads/2026/01/SC-Powerflex-Drives-Image.png
ORGANIZER;CN="Everardo Mendoza":MAILTO:Everardo.Mendoza@kendallelectric.com
GEO:35.6327873;-88.7853842
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Jackson 25 American Drive Jackson TN 38301 United States;X-APPLE-RADIUS=500;X-TITLE=25 American Drive:geo:-88.7853842,35.6327873
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260217T083000
DTEND;TZID=America/Chicago:20260219T163000
DTSTAMP:20260102T170103Z
CREATED:20250710T200432Z
LAST-MODIFIED:20260102T170103Z
UID:10006934-1771317000-1771518600@www.kendallelectric.com
SUMMARY:PowerFlex 750 Series Configuration\, Startup\, Maintenance\, and Troubleshooting
DESCRIPTION:DRV215 presented by Rockwell Automation. \nUpon completion of this course\, given a wired PowerFlex® 750-Series drive (PowerFlex 753 or PowerFlex 755) and AC motor\, you will be able to install the drive correctly\, start it up\, and configure drive parameters to meet application-specific needs. \nThe course also introduces concepts and techniques that will assist you in successfully maintaining and troubleshooting the drive\, recognizing PowerFlex 750-Series drive hardware\, and diagnosing specific faults. Throughout the course\, you will have the chance to use a variety of hardware and software tools\, including: The A6 LCD HIMConnected Components Workbench™ software DriveExecutive™ software \nAfter each demonstration\, you will be given exercises that offer extensive hands-on practice using a PowerFlex 753 or PowerFlex 755 drive. \nThis three-day course can be taken as a standalone course\, or it can be taken in conjunction with other courses in the PowerFlex 7-Class curriculum to broaden skills development further.
URL:https://www.kendallelectric.com/event/powerflex-750-series-configuration-startup-maintenance-and-troubleshooting-3/
LOCATION:Kendall Electric – Jackson\, 25 American Drive\, Jackson\, TN\, 38301\, United States
CATEGORIES:Rockwell Instructor-Led,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Drives.jpg
ORGANIZER;CN="Melissa Kincaid":MAILTO:melissa.kincaid@kendallelectric.com
GEO:35.6327873;-88.7853842
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Jackson 25 American Drive Jackson TN 38301 United States;X-APPLE-RADIUS=500;X-TITLE=25 American Drive:geo:-88.7853842,35.6327873
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20251024T110000
DTEND;TZID=America/Chicago:20251024T130000
DTSTAMP:20250828T181656Z
CREATED:20250826T143417Z
LAST-MODIFIED:20250828T181656Z
UID:10006971-1761303600-1761310800@www.kendallelectric.com
SUMMARY:Grace in Action: Interactive Lab Day
DESCRIPTION:Experience Grace Technologies’ cutting edge electrical safety and reliability solutions —up close and in action.\nWhether your focus is predictive maintenance\, lockout/tagout safety\, or innovative monitoring technologies\, this event has something for you. Enjoy live hands-on demonstrations and Q&A sessions with Grace Engineers and Product Leaders. Don’t miss this opportunity! \n\n2 hour hands on\, interactive session\nLive Q&A with product experts\nLearn about real-world success stories\nHands-on demos & overview of latest innovations\nOptional site visits per request
URL:https://www.kendallelectric.com/event/grace-in-action-interactive-lab-day-4/
LOCATION:Kendall Electric – Jackson\, 25 American Drive\, Jackson\, TN\, 38301\, United States
CATEGORIES:Kendall Technology Update,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2025/08/featured-image-scaled.jpg
ORGANIZER;CN="Marketing":MAILTO:marketing@kendallelectric.com
GEO:35.6327873;-88.7853842
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Jackson 25 American Drive Jackson TN 38301 United States;X-APPLE-RADIUS=500;X-TITLE=25 American Drive:geo:-88.7853842,35.6327873
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20251021T083000
DTEND;TZID=America/Chicago:20251024T163000
DTSTAMP:20260102T170421Z
CREATED:20250710T182415Z
LAST-MODIFIED:20260102T170421Z
UID:10006407-1761035400-1761323400@www.kendallelectric.com
SUMMARY:Industrial Electrical Controls Fundamentals
DESCRIPTION:MFG213 presented by Rockwell Automation. \nThis course is designed to provide knowledge and skills required to install\, maintain and troubleshoot machine controls. \nAt the completion of this course\, you will be able to: \n\nDefine the safety considerations that must be observed when installing\, checking or locking out electrical equipment\nDefine uses and functions of input and output devices\, relays\, and motors\nDemonstrate the reading of schematic diagrams and logic\nDefine an open and short condition and perform voltage and current measurements\nDemonstrate the proper use of the following test equipment in lab to measure voltage\, current\, resistance and continuity: VOM\, DVM\, Multi-meters\, continuity tester and amp probe\nApproximate secondary voltage\, secondary current and primary current of a transformer when given its turns ratio\, primary voltage and secondary load\nIdentify the proper wiring configurations of a control transformer’s primary current for 240V and 480V operation\nApproximate a transformer’s maximum primary current for 480V operation\, using the nameplate information
URL:https://www.kendallelectric.com/event/industrial-electrical-controls-fundamentals-18/
LOCATION:Kendall Electric – Jackson\, 25 American Drive\, Jackson\, TN\, 38301\, United States
CATEGORIES:Rockwell Instructor-Led,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Networking.jpg
ORGANIZER;CN="Melissa Kincaid":MAILTO:melissa.kincaid@kendallelectric.com
GEO:35.6327873;-88.7853842
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Jackson 25 American Drive Jackson TN 38301 United States;X-APPLE-RADIUS=500;X-TITLE=25 American Drive:geo:-88.7853842,35.6327873
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250916T083000
DTEND;TZID=America/Chicago:20250919T163000
DTSTAMP:20250813T160149Z
CREATED:20241230T201955Z
LAST-MODIFIED:20250813T160149Z
UID:10006807-1758011400-1758299400@www.kendallelectric.com
SUMMARY:Studio 5000 Logix Designer Level 2: ControlLogix Maintenance and Troubleshooting
DESCRIPTION:CCP153 presented by Rockwell Automation.\nUpon completion of this course\, you will be able to troubleshoot a previously operational ControlLogix® system and restore normal operation. \nThis course adds to your skill set by introducing new tasks such as connecting to a network\, interpreting project execution\, editing ladder logic online\, and more. You will then be presented with a systematic strategy for diagnosing and troubleshooting a variety of common system errors: \n\nController\, I/O\, and other hardware problems\nNoise-related problems\nSoftware configuration problems
URL:https://www.kendallelectric.com/event/studio-5000-logix-designer-level-2-controllogix-maintenance-and-troubleshooting-14/
LOCATION:Kendall Electric – Jackson\, 25 American Drive\, Jackson\, TN\, 38301\, United States
CATEGORIES:Rockwell Instructor-Led,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Software.jpg
ORGANIZER;CN="Melissa Kincaid":MAILTO:melissa.kincaid@kendallelectric.com
GEO:35.6327873;-88.7853842
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Jackson 25 American Drive Jackson TN 38301 United States;X-APPLE-RADIUS=500;X-TITLE=25 American Drive:geo:-88.7853842,35.6327873
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250623T123000
DTEND;TZID=America/Chicago:20250627T163000
DTSTAMP:20250319T143623Z
CREATED:20241230T201925Z
LAST-MODIFIED:20250319T143623Z
UID:10006287-1750681800-1751041800@www.kendallelectric.com
SUMMARY:Studio 5000 Logix Designer Level 1: ControlLogix Fundamentals and Troubleshooting
DESCRIPTION:CCP299 presented by Rockwell Automation.\nUpon completion of this course\, you should be able to troubleshoot a previously operational ControlLogix® system and restore normal operation. \nYou will have the opportunity to develop and practice these skills by: \n\nLearning basic concepts and terminology used with:\n\nControlLogix system hardware\nStudio 5000 Logix Designer® application\n\n\nPracticing a systematic strategy for diagnosing and troubleshooting problems:\n\nConfiguration issues\nElectrical noise\nFaulty/malfunctioning field devices\nController I/O\, or other hardware issues\n\n\nPerforming hands-on exercises
URL:https://www.kendallelectric.com/event/studio-5000-logix-designer-level-1-controllogix-fundamentals-and-troubleshooting-32/
LOCATION:Kendall Electric – Jackson\, 25 American Drive\, Jackson\, TN\, 38301\, United States
CATEGORIES:Rockwell Instructor-Led,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Software.jpg
ORGANIZER;CN="Melissa Kincaid":MAILTO:melissa.kincaid@kendallelectric.com
GEO:35.6327873;-88.7853842
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Jackson 25 American Drive Jackson TN 38301 United States;X-APPLE-RADIUS=500;X-TITLE=25 American Drive:geo:-88.7853842,35.6327873
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20250506T080000
DTEND;TZID=America/New_York:20250506T120000
DTSTAMP:20250327T150022Z
CREATED:20250320T134226Z
LAST-MODIFIED:20250327T150022Z
UID:10006369-1746518400-1746532800@www.kendallelectric.com
SUMMARY:Generac Power 4 Profits 1.0
DESCRIPTION:Learn about Generac Air-Cooled Residential Standby Generators and get certified to install. \nHave you been asked about generators by one of your customers? \nLearn how to size\, sell\, and install Generac generators at these classes being hosted by a Generac Sales Representative. \nTOPICS: \n\nResidential Market Overview\nSite Preparation\nFuel Considerations\nBack Up Options\nTransfer Switch Connections\nGenerator Connections\nOperational Tests & Final Steps\nSizing the Generator: NEC 220\, Part IV.\n\nMore benefits for attending this course include access to the PROresources quote builder and generator sizer\, monthly E-newsletter from Generac\, new Generac products and programs announcements\, first to learn about upcoming trainings\, and access to Generac marketing tools and resources. \nTake the test at the end of the class to get certified for Generac generator installation. This will become mandatory in 2026. \nReceive an AO fishing & more cooler backpack for attending and keep food & drinks cold for hours on the job site or your next trip! (Valued at $159) \n \n 
URL:https://www.kendallelectric.com/event/generac-power-4-profits-1-0-2/
LOCATION:Kendall Electric – Jackson\, 25 American Drive\, Jackson\, TN\, 38301\, United States
CATEGORIES:Kendall Technology Update,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2025/03/hsb-beauty-shot-web-image.jpg
ORGANIZER;CN="Marketing":MAILTO:marketing@kendallelectric.com
GEO:35.6327873;-88.7853842
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Jackson 25 American Drive Jackson TN 38301 United States;X-APPLE-RADIUS=500;X-TITLE=25 American Drive:geo:-88.7853842,35.6327873
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250505T083000
DTEND;TZID=America/Chicago:20250505T120000
DTSTAMP:20250418T174714Z
CREATED:20250404T195259Z
LAST-MODIFIED:20250418T174714Z
UID:10006895-1746433800-1746446400@www.kendallelectric.com
SUMMARY:Medium Voltage Termination and Splicing
DESCRIPTION:Join us for a hands-on demonstration of medium voltage termination & splicing best practices.\nOur instructor will coach you on how to prepare cables for termination\, including tools required and common pitfalls to avoid. Attendees will participate with detailed instructions\, highlighting features\, applications\, & specifications. Learn how to correctly install Burndy termination kits\, with tips to ensure reliability and efficiency. \nSESSION TOPICS: \n\nProduct Overview: Low & Medium Voltage\nSafety Protocols\nInstallation Best Practice\nInstallation Tools\nCable Preparation\nTermination Kit Installations\nQ&A Session
URL:https://www.kendallelectric.com/event/medium-voltage-termination-splicing-2/
LOCATION:Kendall Electric – Jackson\, 25 American Drive\, Jackson\, TN\, 38301\, United States
CATEGORIES:Kendall Connected Training,South Central
ORGANIZER;CN="Marketing":MAILTO:marketing@kendallelectric.com
GEO:35.6327873;-88.7853842
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Jackson 25 American Drive Jackson TN 38301 United States;X-APPLE-RADIUS=500;X-TITLE=25 American Drive:geo:-88.7853842,35.6327873
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250327T083000
DTEND;TZID=America/Chicago:20250328T163000
DTSTAMP:20250319T142925Z
CREATED:20240710T195734Z
LAST-MODIFIED:20250319T142925Z
UID:10006567-1743064200-1743179400@www.kendallelectric.com
SUMMARY:PowerFlex 750-Series Maintenance and Troubleshooting
DESCRIPTION:CCA183 presented by Rockwell Automation. This skill-building course introduces concepts and techniques that will assist you in successfully maintaining and troubleshooting a PowerFlex®750-Series (PowerFlex 753 or PowerFlex 755) drive. You will learn how to recognize PowerFlex 750-Series drive hardware and properly wire the drive. You will also learn to diagnose specific faults. \nThroughout the course\, you will have the chance to use a variety of maintenance and troubleshooting tools\, including:\n• The A6 LCD HIM\n• Connected Components Workbench™ software\n• Drive Executive™ software. \nAfter each demonstration\, you will be given exercises that offer extensive hands-on practice using a PowerFlex 753 or PowerFlex 755 drive. This two-day course can be taken as a stand-alone course\, or it can be taken in conjunction with other courses in the PowerFlex curriculum for further skills development.
URL:https://www.kendallelectric.com/event/powerflex-750-series-maintenance-and-troubleshooting-10/
LOCATION:Kendall Electric – Jackson\, 25 American Drive\, Jackson\, TN\, 38301\, United States
CATEGORIES:Rockwell Instructor-Led,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Drives.jpg
ORGANIZER;CN="Melissa Kincaid":MAILTO:melissa.kincaid@kendallelectric.com
GEO:35.6327873;-88.7853842
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Jackson 25 American Drive Jackson TN 38301 United States;X-APPLE-RADIUS=500;X-TITLE=25 American Drive:geo:-88.7853842,35.6327873
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250325T083000
DTEND;TZID=America/Chicago:20250326T163000
DTSTAMP:20250319T142617Z
CREATED:20240710T195552Z
LAST-MODIFIED:20250319T142617Z
UID:10006566-1742891400-1743006600@www.kendallelectric.com
SUMMARY:PowerFlex 750-Series Configuration and Startup
DESCRIPTION:CCA182 presented by Rockwell Automation. Upon completion of this course\, given a wired PowerFlex® 750-Series drive (PowerFlex 753 or PowerFlex 755) and AC motor\, you will be able to properly install the drive\, start up the drive\, and configure drive parameters to meet application-specific needs. \nThroughout the course\, you will have the chance to use a variety of hardware and software tools\, including:\n• The A6 LCD HIM\n• Connected Components Workbench™ software\n• DriveExecutive™ software \nAfter each demonstration\, you will be given exercises that offer extensive hands-on practice using a PowerFlex 753 or PowerFlex 755 drive. This two-day course can be taken as a standalone course\, or it can be taken in conjunction with other courses in the PowerFlex 7-Class curriculum to further broaden skills development.
URL:https://www.kendallelectric.com/event/powerflex-750-series-configuration-and-startup-8/
LOCATION:Kendall Electric – Jackson\, 25 American Drive\, Jackson\, TN\, 38301\, United States
CATEGORIES:Rockwell Instructor-Led,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Drives.jpg
ORGANIZER;CN="Melissa Kincaid":MAILTO:melissa.kincaid@kendallelectric.com
GEO:35.6327873;-88.7853842
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Jackson 25 American Drive Jackson TN 38301 United States;X-APPLE-RADIUS=500;X-TITLE=25 American Drive:geo:-88.7853842,35.6327873
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250319T110000
DTEND;TZID=America/Chicago:20250319T123000
DTSTAMP:20250207T141754Z
CREATED:20250207T140858Z
LAST-MODIFIED:20250207T141754Z
UID:10006861-1742382000-1742387400@www.kendallelectric.com
SUMMARY:Migrating from SLC to CompactLogix
DESCRIPTION:Join our expert-led training on modernizing SLC and MicroLogix PLCs to the latest CompactLogix 5380 and Micro800 platforms. Learn how to mitigate the risks of using outdated technology and discover practical solutions for staying competitive. We’ll cover best practices and next steps for upgrading your automation infrastructure to achieve better performance\, scalability\, and efficiency. \nTopics covered:\n• Identifying and mitigating risks of obsolete platforms\n• Modernization strategies and recommended upgrades\n• Resources and services from Rockwell Automation and Kendall Electric to support the transition
URL:https://www.kendallelectric.com/event/migrating-from-slc-to-compactlogix-4/
LOCATION:Kendall Electric – Jackson\, 25 American Drive\, Jackson\, TN\, 38301\, United States
CATEGORIES:Kendall Technology Update,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2025/02/Modernization-SLC-to-CompactLogix-1600x900-1.jpeg
ORGANIZER;CN="Taylor Lanter":MAILTO:taylor.lanter@kendallelectric.com
GEO:35.6327873;-88.7853842
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Jackson 25 American Drive Jackson TN 38301 United States;X-APPLE-RADIUS=500;X-TITLE=25 American Drive:geo:-88.7853842,35.6327873
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250218T083000
DTEND;TZID=America/Chicago:20250221T163000
DTSTAMP:20240710T195444Z
CREATED:20240710T195444Z
LAST-MODIFIED:20240710T195444Z
UID:10006565-1739867400-1740155400@www.kendallelectric.com
SUMMARY:FactoryTalk View ME & PanelView Plus Programming
DESCRIPTION:CCV204-A presented by Rockwell Automation. After completing this course\, given a computer with FactoryTalk® View Machine Edition (ME) software and a PanelView™ Plus 7 terminal\, you should be able to produce an operational application running on the terminal. \nDuring class\, you will practice the following hands-on skills:\n• Prepare a PanelView Plus 7 terminal for operation\n• Create a new application and run it on a terminal\n• Create\, configure\, and animate graphic objects on graphic displays\n• Configure security for granting/restricting access to certain graphic displays or for rights to perform certain actions\n• Create and configure messages and alarms for alerting operators to changes in a process
URL:https://www.kendallelectric.com/event/factorytalk-view-me-panelview-plus-programming-11/
LOCATION:Kendall Electric – Jackson\, 25 American Drive\, Jackson\, TN\, 38301\, United States
CATEGORIES:Rockwell Instructor-Led,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Visualization.jpg
ORGANIZER;CN="Melissa Kincaid":MAILTO:melissa.kincaid@kendallelectric.com
GEO:35.6327873;-88.7853842
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Jackson 25 American Drive Jackson TN 38301 United States;X-APPLE-RADIUS=500;X-TITLE=25 American Drive:geo:-88.7853842,35.6327873
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250110T090000
DTEND;TZID=America/Chicago:20250110T163000
DTSTAMP:20240904T194815Z
CREATED:20240904T175212Z
LAST-MODIFIED:20240904T194815Z
UID:10006720-1736499600-1736526600@www.kendallelectric.com
SUMMARY:Rockwell Automation VFDs: Backup\, Replace\, Restore\, and Redeploy
DESCRIPTION:Get hands-on experience returning failed automation equipment back to service.\nDesigned specifically for maintenance personnel and electricians\, this one-day course gives students the opportunity to work with a fully functional automated system that contains all of the target VFDs\, PanelView terminals\, PLCs\, Servos\, & industrial switches. Students will systematically one-by-one backup\, replace\, restore\, and return to service each device using detailed step-by step and pictorially illustrated labs. \nLab manuals included in this course can be used for future reference when replacing equipment on the plant floor. \nPRODUCTS COVERED:\nVariable Frequency Drives (VFDs)\nPowerFlex 525\, PowerFlex 755\, PowerFlex 527 \nKinetix Servos\nKinetix 5300\, Kinetix 5500
URL:https://www.kendallelectric.com/event/rockwell-automation-hmis-backup-replace-restore-and-redeploy-11/
LOCATION:Kendall Electric – Jackson\, 25 American Drive\, Jackson\, TN\, 38301\, United States
CATEGORIES:Kendall Connected Training,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2024/09/VFD-Backup-no-blue.jpg
ORGANIZER;CN="Melissa Kincaid":MAILTO:melissa.kincaid@kendallelectric.com
GEO:35.6327873;-88.7853842
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Jackson 25 American Drive Jackson TN 38301 United States;X-APPLE-RADIUS=500;X-TITLE=25 American Drive:geo:-88.7853842,35.6327873
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250109T090000
DTEND;TZID=America/Chicago:20250109T163000
DTSTAMP:20240904T184827Z
CREATED:20240904T175145Z
LAST-MODIFIED:20240904T184827Z
UID:10006214-1736413200-1736440200@www.kendallelectric.com
SUMMARY:Intermediate Logix
DESCRIPTION:Get hands-on with Logix in these 1-day instructor-led training sessions.\n\nFlexible – only choose the days you want\nScalable – classes cover various skills levels\nIndividual – students will be provided with individual lab stations\n\nSESSIONS AVAILABLE: \n\nIntro to Logix\nIntermediate Logix\nIntro to Logix Troubleshooting
URL:https://www.kendallelectric.com/event/intermediate-logix-9/
LOCATION:Kendall Electric – Jackson\, 25 American Drive\, Jackson\, TN\, 38301\, United States
CATEGORIES:Kendall Connected Training,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2024/08/Workstation_Remote_Adapter-scaled-7phd5x.tmp_.jpg
ORGANIZER;CN="Melissa Kincaid":MAILTO:melissa.kincaid@kendallelectric.com
GEO:35.6327873;-88.7853842
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Jackson 25 American Drive Jackson TN 38301 United States;X-APPLE-RADIUS=500;X-TITLE=25 American Drive:geo:-88.7853842,35.6327873
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250108T090000
DTEND;TZID=America/Chicago:20250108T163000
DTSTAMP:20260728T225120Z
CREATED:20240904T175137Z
LAST-MODIFIED:20260728T225120Z
UID:10006206-1736326800-1736353800@www.kendallelectric.com
SUMMARY:Intro to Logix Troubleshooting
DESCRIPTION:Get hands-on with Logix in these 1-day instructor-led training sessions.\n\nFlexible – only choose the days you want\nScalable – classes cover various skills levels\nIndividual – students will be provided with individual lab stations\n\nSESSIONS AVAILABLE: \n\nIntro to Logix\nIntermediate Logix\nIntro to Logix Troubleshooting
URL:https://www.kendallelectric.com/event/intro-to-logix-troubleshooting-8/
LOCATION:Kendall Electric – Jackson\, 25 American Drive\, Jackson\, TN\, 38301\, United States
CATEGORIES:Kendall Connected Training,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2024/08/Workstation_Remote_Adapter-scaled-7phd5x.tmp_.jpg
ORGANIZER;CN="Melissa Kincaid":MAILTO:melissa.kincaid@kendallelectric.com
GEO:35.6327873;-88.7853842
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Jackson 25 American Drive Jackson TN 38301 United States;X-APPLE-RADIUS=500;X-TITLE=25 American Drive:geo:-88.7853842,35.6327873
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250107T090000
DTEND;TZID=America/Chicago:20250107T163000
DTSTAMP:20240904T182522Z
CREATED:20240904T175132Z
LAST-MODIFIED:20240904T182522Z
UID:10006704-1736240400-1736267400@www.kendallelectric.com
SUMMARY:Intro to Logix
DESCRIPTION:Get hands-on with Logix in these 1-day instructor-led training sessions.\n\nFlexible – only choose the days you want\nScalable – classes cover various skills levels\nIndividual – students will be provided with individual lab stations\n\nSESSIONS AVAILABLE: \n\nIntro to Logix\nIntermediate Logix\nIntro to Logix Troubleshooting
URL:https://www.kendallelectric.com/event/intro-to-logix-10/
LOCATION:Kendall Electric – Jackson\, 25 American Drive\, Jackson\, TN\, 38301\, United States
CATEGORIES:Kendall Connected Training,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2024/08/Workstation_Remote_Adapter-scaled-7phd5x.tmp_.jpg
ORGANIZER;CN="Melissa Kincaid":MAILTO:melissa.kincaid@kendallelectric.com
GEO:35.6327873;-88.7853842
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Jackson 25 American Drive Jackson TN 38301 United States;X-APPLE-RADIUS=500;X-TITLE=25 American Drive:geo:-88.7853842,35.6327873
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250106T090000
DTEND;TZID=America/Chicago:20250106T163000
DTSTAMP:20241001T183511Z
CREATED:20240904T175158Z
LAST-MODIFIED:20241001T183511Z
UID:10006223-1736154000-1736181000@www.kendallelectric.com
SUMMARY:Introduction to Micro 800 PLC & PanelView 800 HMI
DESCRIPTION:This one-day class introduces both the Allen-Bradley Micro800® Controllers and PanelView® 800 Graphic Terminals\, all in one day.\nTraining workstations consisting of a Micro850 controller\, PanelView® 800\, and utilizing Connected Components Workbench™ (CCW) software will allow students to review hardware and software basics. Students will then create controller programs and PanelView applications illustrating the interaction between the two devices. \nNote: This is an introduction class and is not intended as a full instructional programming class.  \nSession Topics: \n\nMicro800® Controllers overview\nPanelView® 800 Graphic Terminals overview\nConnected Components Workbench™ (CCW) Software Overview\nHow to upgrade (flash) Micro800® firmware\nDownloading and installing CCW software\nLaunching software and establishing connectivity\nNavigating CCW software features\nBasic ladder programming\nForcing inputs and outputs\nCreating PanelView® 800 applications\nAdding PanelView® 800 indicators controlled by the Micro800® Controller
URL:https://www.kendallelectric.com/event/micro800-plc-hmi-4/
LOCATION:Kendall Electric – Jackson\, 25 American Drive\, Jackson\, TN\, 38301\, United States
CATEGORIES:Kendall Connected Training,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2024/09/Workstation_Micro820-HMI_Teal_Green-scaled.jpg
ORGANIZER;CN="Melissa Kincaid":MAILTO:melissa.kincaid@kendallelectric.com
GEO:35.6327873;-88.7853842
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Jackson 25 American Drive Jackson TN 38301 United States;X-APPLE-RADIUS=500;X-TITLE=25 American Drive:geo:-88.7853842,35.6327873
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20241212T083000
DTEND;TZID=America/Chicago:20241213T163000
DTSTAMP:20240628T163520Z
CREATED:20240628T163520Z
LAST-MODIFIED:20240628T163520Z
UID:10006129-1733992200-1734107400@www.kendallelectric.com
SUMMARY:Studio 5000 Logix Designer Level 2: Basic Ladder Logic Programming
DESCRIPTION:CCP151 presented by Rockwell Automation. After completing this course\, you should be able to program basic ladder logic instructions for Logix5000™ controllers. This is a skill-building course that provides you with the resources and hands-on practice required to complete this objective. You will have an opportunity to use the Studio 5000 Logix Designer® application to perform basic software tasks to meet the requirements of a given functional specification. In addition\, you will set up a sequencer to run equipment through a predefined procedure and separate production procedure from equipment control.
URL:https://www.kendallelectric.com/event/studio-5000-logix-designer-level-2-basic-ladder-logic-programming-23/
LOCATION:Kendall Electric – Jackson\, 25 American Drive\, Jackson\, TN\, 38301\, United States
CATEGORIES:Rockwell Instructor-Led,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Software.jpg
ORGANIZER;CN="Melissa Kincaid":MAILTO:melissa.kincaid@kendallelectric.com
GEO:35.6327873;-88.7853842
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Jackson 25 American Drive Jackson TN 38301 United States;X-APPLE-RADIUS=500;X-TITLE=25 American Drive:geo:-88.7853842,35.6327873
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20241210T083000
DTEND;TZID=America/Chicago:20241211T163000
DTSTAMP:20240628T163424Z
CREATED:20240628T163424Z
LAST-MODIFIED:20240628T163424Z
UID:10006127-1733819400-1733934600@www.kendallelectric.com
SUMMARY:Studio 5000 Logix Designer Level 1: ControlLogix System Fundamentals
DESCRIPTION:CCP146 presented by Rockwell Automation. After completing this course\, you should be able to perform basic ControlLogix® and Studio 5000 Logix Designer® tasks\, such as:\n• Creating and configuring a project\n• Communicating with a controller. \nThe course will assist you in developing and building a solid foundation with a fundamental knowledge of ControlLogix and other Logix5000™ systems. You will be introduced to basic Logix5000 concepts and terminology\, and you will be exposed to Logix5000 system hardware\, including hands-on experience with the ControlLogix platform.
URL:https://www.kendallelectric.com/event/studio-5000-logix-designer-level-1-controllogix-system-fundamentals-23/
LOCATION:Kendall Electric – Jackson\, 25 American Drive\, Jackson\, TN\, 38301\, United States
CATEGORIES:Rockwell Instructor-Led,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Software.jpg
ORGANIZER;CN="Melissa Kincaid":MAILTO:melissa.kincaid@kendallelectric.com
GEO:35.6327873;-88.7853842
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Jackson 25 American Drive Jackson TN 38301 United States;X-APPLE-RADIUS=500;X-TITLE=25 American Drive:geo:-88.7853842,35.6327873
END:VEVENT
END:VCALENDAR