BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//Kendall Electric - ECPv6.17.1//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-ORIGINAL-URL:https://www.kendallelectric.com
X-WR-CALDESC:Events for Kendall Electric
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:America/New_York
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20250309T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20251102T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20260308T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20261101T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20270314T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20271107T060000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260610T080000
DTEND;TZID=America/New_York:20260610T120000
DTSTAMP:20260105T180545Z
CREATED:20251117T204726Z
LAST-MODIFIED:20260105T180545Z
UID:10007013-1781078400-1781092800@www.kendallelectric.com
SUMMARY:NFPA 70E Arc Flash and Electrical Safety Awareness
DESCRIPTION:Everyone has responsibility for electrical safety in the workplace\, and this in-depth training will provide you with the ability to identify Arc Flash and electrical safety hazards. You will learn techniques and best practices to limit exposure to these identified hazards. Key concepts presented in this course include: \n\nHazards related to an Arc Flash/Blast\nIndustry recognized standards and regulations­—NFPA 70E\nWorker protection and OSHA compliance\nWorkplace practices to limit hazard exposure and risk\nArc Flash risk reduction solutions\n\nDuring this four hour training\, you will acquire the necessary safety detection skills\, enabling you to protect both yourself and your fellow employees.
URL:https://www.kendallelectric.com/event/nfpa-70e-arc-flash-and-electrical-safety-awareness-10/
LOCATION:Galloup – Wyoming\, 3838 Clay Avenue SW\, Wyoming\, MI\, 49548\, United States
CATEGORIES:Great Lakes North,Kendall Connected Training,NFPA70E
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_Arcflash.jpg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:42.8938509;-85.6763234
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Galloup – Wyoming 3838 Clay Avenue SW Wyoming MI 49548 United States;X-APPLE-RADIUS=500;X-TITLE=3838 Clay Avenue SW:geo:-85.6763234,42.8938509
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260609T090000
DTEND;TZID=America/New_York:20260609T163000
DTSTAMP:20260529T161613Z
CREATED:20260206T151227Z
LAST-MODIFIED:20260529T161613Z
UID:10006591-1780995600-1781022600@www.kendallelectric.com
SUMMARY:Rockwell Automation Variable Frequency Drives: Backup\, Replace\, Restore\, and Redeploy
DESCRIPTION:Get hands-on experience returning failed automation equipment back to service. \nDesigned specifically for maintenance personnel and electricians\, this one-day course gives students the opportunity to work with a fully functional automated system that contains all of the target VFDs\, PanelView terminals\, PLCs\, Servos\, & industrial switches. Students will systematically one-by-one backup\, replace\, restore\, and return to service each device using detailed step-by step and pictorially illustrated labs. \nLab manuals included in this course can be used for future reference when replacing equipment on the plant floor. \nProducts covered: \n\nVariable Frequency Drives (VFDs)\n\nPowerFlex 525\, PowerFlex 755\, PowerFlex 527\n\n\nKinetix Servos\n\nKinetix 5300\, Kinetix 5500
URL:https://www.kendallelectric.com/event/rockwell-automation-variable-frequency-drives-backup-replace-restore-and-redeploy-24/
LOCATION:Kendall Electric – Cadillac\, 909 W 13th Street\, Cadillac\, MI\, 49601\, United States
CATEGORIES:Great Lakes North,Kendall Connected Training
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2025/01/drives-event-image.jpg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:44.2664585;-85.422352
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Cadillac 909 W 13th Street Cadillac MI 49601 United States;X-APPLE-RADIUS=500;X-TITLE=909 W 13th Street:geo:-85.422352,44.2664585
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260608T090000
DTEND;TZID=America/New_York:20260608T163000
DTSTAMP:20260529T161522Z
CREATED:20260206T145819Z
LAST-MODIFIED:20260529T161522Z
UID:10007113-1780909200-1780936200@www.kendallelectric.com
SUMMARY:Introduction to PanelView Plus 7
DESCRIPTION:Get hands-on with PanelView Plus 7 HMIs in these 1-day instructor-led training sessions. \nThis one-day technical course focuses on programming and operating the PanelView Plus 7 Graphic Terminal using FactoryTalk View and RSLinx software. Attendees will build a Logix PLC project\, develop multiple PanelView Plus 7 HMI applications\, and bind PLC tags to HMI objects through guided instruction and hands-on labs. The training emphasizes real-world configuration\, navigation\, and feature implementation to support efficient HMI development and deployment. \n\nFlexible – only choose the days you want\nScalable – classes cover various skill levels\nIndividual – students will be provided with individual lab stations
URL:https://www.kendallelectric.com/event/introduction-to-panelview-plus-7-27/
LOCATION:Kendall Electric – Cadillac\, 909 W 13th Street\, Cadillac\, MI\, 49601\, United States
CATEGORIES:Great Lakes North,Kendall Connected Training
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2026/02/PanelView-Plus-7.jpeg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:44.2664585;-85.422352
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Cadillac 909 W 13th Street Cadillac MI 49601 United States;X-APPLE-RADIUS=500;X-TITLE=909 W 13th Street:geo:-85.422352,44.2664585
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260605T090000
DTEND;TZID=America/New_York:20260605T163000
DTSTAMP:20260527T143535Z
CREATED:20260209T135420Z
LAST-MODIFIED:20260527T143535Z
UID:10007132-1780650000-1780677000@www.kendallelectric.com
SUMMARY:Advanced Logix
DESCRIPTION:Get hands-on with Logix in these 1-day instructor-led training sessions. \n\nFlexible – only choose the days you want\nScalable – classes cover various skill levels\nIndividual – students will be provided with individual lab stations\n\nSessions Available: \n\nIntro to Logix\nIntro to Logix Troubleshooting\nIntermediate Logix\nIntermediate Logix Troubleshooting\nAdvanced Logix
URL:https://www.kendallelectric.com/event/advanced-logix-11/
LOCATION:Kendall Electric – Cadillac\, 909 W 13th Street\, Cadillac\, MI\, 49601\, United States
CATEGORIES:Great Lakes North,Kendall Connected Training
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2024/08/Workstation_Micro820-PLC-scaled-VPU2Sk.tmp_.jpg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:44.2664585;-85.422352
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Cadillac 909 W 13th Street Cadillac MI 49601 United States;X-APPLE-RADIUS=500;X-TITLE=909 W 13th Street:geo:-85.422352,44.2664585
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260604T090000
DTEND;TZID=America/New_York:20260604T163000
DTSTAMP:20260527T143446Z
CREATED:20260209T134042Z
LAST-MODIFIED:20260527T143446Z
UID:10007127-1780563600-1780590600@www.kendallelectric.com
SUMMARY:Intermediate Logix Troubleshooting
DESCRIPTION:Get hands-on with Logix in these 1-day instructor-led training sessions. \n\nFlexible – only choose the days you want\nScalable – classes cover various skill levels\nIndividual – students will be provided with individual lab stations\n\nSessions Available: \n\nIntro to Logix\nIntro to Logix Troubleshooting\nIntermediate Logix\nIntermediate Logix Troubleshooting\nAdvanced Logix
URL:https://www.kendallelectric.com/event/intermediate-logix-troubleshooting-11/
LOCATION:Kendall Electric – Cadillac\, 909 W 13th Street\, Cadillac\, MI\, 49601\, United States
CATEGORIES:Great Lakes North,Kendall Connected Training
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2024/08/Workstation_Micro820-PLC-scaled-VPU2Sk.tmp_.jpg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:44.2664585;-85.422352
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Cadillac 909 W 13th Street Cadillac MI 49601 United States;X-APPLE-RADIUS=500;X-TITLE=909 W 13th Street:geo:-85.422352,44.2664585
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260603T090000
DTEND;TZID=America/New_York:20260603T163000
DTSTAMP:20260527T143353Z
CREATED:20260206T213754Z
LAST-MODIFIED:20260527T143353Z
UID:10007125-1780477200-1780504200@www.kendallelectric.com
SUMMARY:Intermediate Logix
DESCRIPTION:Get hands-on with Logix in these 1-day instructor-led training sessions. \n\nFlexible – only choose the days you want\nScalable – classes cover various skill levels\nIndividual – students will be provided with individual lab stations\n\nSessions Available: \n\nIntro to Logix\nIntro to Logix Troubleshooting\nIntermediate Logix\nIntermediate Logix Troubleshooting\nAdvanced Logix
URL:https://www.kendallelectric.com/event/intermediate-logix-17/
LOCATION:Kendall Electric – Cadillac\, 909 W 13th Street\, Cadillac\, MI\, 49601\, United States
CATEGORIES:Great Lakes North,Kendall Connected Training
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2024/08/Workstation_Micro820-PLC-scaled-VPU2Sk.tmp_.jpg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:44.2664585;-85.422352
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Cadillac 909 W 13th Street Cadillac MI 49601 United States;X-APPLE-RADIUS=500;X-TITLE=909 W 13th Street:geo:-85.422352,44.2664585
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260602T090000
DTEND;TZID=America/New_York:20260602T163000
DTSTAMP:20260527T143256Z
CREATED:20260206T170510Z
LAST-MODIFIED:20260527T143256Z
UID:10007123-1780390800-1780417800@www.kendallelectric.com
SUMMARY:Intro to Logix Troubleshooting
DESCRIPTION:Get hands-on with Logix in these 1-day instructor-led training sessions. \n\nFlexible – only choose the days you want\nScalable – classes cover various skill levels\nIndividual – students will be provided with individual lab stations\n\nSessions Available: \n\nIntro to Logix\nIntro to Logix Troubleshooting\nIntermediate Logix\nIntermediate Logix Troubleshooting\nAdvanced Logix
URL:https://www.kendallelectric.com/event/intro-to-logix-troubleshooting-16/
LOCATION:Kendall Electric – Cadillac\, 909 W 13th Street\, Cadillac\, MI\, 49601\, United States
CATEGORIES:Great Lakes North,Kendall Connected Training
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2024/08/Workstation_Micro820-PLC-scaled-VPU2Sk.tmp_.jpg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:44.2664585;-85.422352
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Cadillac 909 W 13th Street Cadillac MI 49601 United States;X-APPLE-RADIUS=500;X-TITLE=909 W 13th Street:geo:-85.422352,44.2664585
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260602T080000
DTEND;TZID=America/New_York:20260605T163000
DTSTAMP:20260526T143842Z
CREATED:20260129T152404Z
LAST-MODIFIED:20260526T143842Z
UID:10007092-1780387200-1780677000@www.kendallelectric.com
SUMMARY:PLC Wiring & Troubleshooting
DESCRIPTION:Learn how to talk through and troubleshoot PLC ladder logic using Logix5000 software in order to locate a “real” faulty input or output device\, replace it\, and get the process back up and running. It’s all about troubleshooting! \nEach attendee will actually wire the input and output (I/O) field devices to the PLC using their own PLC Trainer! \nSession Topics: \n\nEthernet communications set up using RSLinx\nDiscuss the BootP utility using an “out of the box” controller to set the IP address and configuration in RSLinx\nEthernet/IP driver: explain “RSWho views” and RSLinx configuration\nToggling and forcing real and simulated input and outputs\nTimers\, Counters\, One-Shot\nCompare blocks\, First-Scan\, Mov/Clr blocks\nMath blocks\, Set Bit Zero/Negative\nJump\, Jump to Subroutine\, Master Control Reset\nOne/two Dimension arrays\, Fill File\, Copy File\, Average File\nBit-Shift Right/Left\, First-In-First-Out\, Load/Unload\nLast-In-First-Out\, Load/Unload\, Masked Move\nSequencer Output using the Array\, Mask\, and Output Tables\nIndirect Addressing\, Add-On Instructions
URL:https://www.kendallelectric.com/event/plc-wiring-troubleshooting-23/
LOCATION:Kendall Electric – Fort Wayne\, 4621 Executive Boulevard\, Fort Wayne\, IN\, 46808\, United States
CATEGORIES:Great Lakes South,Kendall Connected Training
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2026/02/PLC-Trainer-1-scaled.jpg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:41.1214083;-85.1668463
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Fort Wayne 4621 Executive Boulevard Fort Wayne IN 46808 United States;X-APPLE-RADIUS=500;X-TITLE=4621 Executive Boulevard:geo:-85.1668463,41.1214083
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260601T090000
DTEND;TZID=America/New_York:20260601T163000
DTSTAMP:20260527T143204Z
CREATED:20260206T155824Z
LAST-MODIFIED:20260527T143204Z
UID:10007119-1780304400-1780331400@www.kendallelectric.com
SUMMARY:Intro to Logix
DESCRIPTION:Get hands-on with Logix in these 1-day instructor-led training sessions. \n\nFlexible – only choose the days you want\nScalable – classes cover various skill levels\nIndividual – students will be provided with individual lab stations\n\nSessions Available: \n\nIntro to Logix\nIntro to Logix Troubleshooting\nIntermediate Logix\nIntermediate Logix Troubleshooting\nAdvanced Logix
URL:https://www.kendallelectric.com/event/intro-to-logix-23/
LOCATION:Kendall Electric – Cadillac\, 909 W 13th Street\, Cadillac\, MI\, 49601\, United States
CATEGORIES:Great Lakes North,Kendall Connected Training
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2024/08/Workstation_Micro820-PLC-scaled-VPU2Sk.tmp_.jpg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:44.2664585;-85.422352
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Cadillac 909 W 13th Street Cadillac MI 49601 United States;X-APPLE-RADIUS=500;X-TITLE=909 W 13th Street:geo:-85.422352,44.2664585
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260504T123000
DTEND;TZID=America/New_York:20260508T163000
DTSTAMP:20260427T152143Z
CREATED:20260107T155352Z
LAST-MODIFIED:20260427T152143Z
UID:10006512-1777897800-1778257800@www.kendallelectric.com
SUMMARY:Studio 5000 Logix Desinger Level 1: ControlLogix Fundamentals & Troubleshooting
DESCRIPTION:CCP299 presented by Rockwell Automation. \nUpon completion of this course\, you should be able to troubleshoot a previously operational ControlLogix® system and restore normal operation. \nYou will have the opportunity to develop and practice these skills by: \n\nLearning basic concepts and terminology used with:\n\nControlLogix system hardware\nStudio 5000 Logix Designer® application\n\n\nPracticing a systematic strategy for diagnosing and troubleshooting problems:\n\nConfiguration issues\nElectrical noise\nFaulty/malfunctioning field devices\nController I/O\, or other hardware issues\n\n\nPerforming hands-on exercises
URL:https://www.kendallelectric.com/event/studio-5000-logix-desinger-level-1-controllogix-fundamentals-troubleshooting/
LOCATION:Galloup – Wyoming\, 3838 Clay Avenue SW\, Wyoming\, MI\, 49548\, United States
CATEGORIES:Great Lakes North,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Software.jpg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:42.8938509;-85.6763234
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Galloup – Wyoming 3838 Clay Avenue SW Wyoming MI 49548 United States;X-APPLE-RADIUS=500;X-TITLE=3838 Clay Avenue SW:geo:-85.6763234,42.8938509
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260428T083000
DTEND;TZID=America/New_York:20260430T163000
DTSTAMP:20260421T195830Z
CREATED:20260107T154300Z
LAST-MODIFIED:20260421T195830Z
UID:10007034-1777365000-1777566600@www.kendallelectric.com
SUMMARY:Motion Control Fundamentals using Kinetix 5700 (CIP) Servo Drives
DESCRIPTION:CCN132 presented by Rockwell Automation.  \nUpon completion of this course\, you should be able to demonstrate fundamental motion control concepts common to all Rockwell Automation motion control systems. \nThis course is designed to provide you with an understanding of the concepts\, terminology\, functionality\, and applications of motion control. This course will also allow you to establish the foundation you need before learning the skills necessary to maintain and program motion control systems. \nThis course does not address motion control system design or specific motion control software programming. If you are seeking training in these areas\, you should enroll in the relevant Rockwell Automation training courses\, making sure you have fulfilled the prerequisites for those courses prior to enrollment.
URL:https://www.kendallelectric.com/event/motion-control-fundamentals-using-kinetix-5700-cip-servo-drives-8/
LOCATION:Kendall Electric – Fort Wayne\, 4621 Executive Boulevard\, Fort Wayne\, IN\, 46808\, United States
CATEGORIES:Great Lakes South,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Motion-Control.jpg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:41.1214083;-85.1668463
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Fort Wayne 4621 Executive Boulevard Fort Wayne IN 46808 United States;X-APPLE-RADIUS=500;X-TITLE=4621 Executive Boulevard:geo:-85.1668463,41.1214083
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260422T083000
DTEND;TZID=America/New_York:20260423T163000
DTSTAMP:20260413T123316Z
CREATED:20260107T154449Z
LAST-MODIFIED:20260413T123316Z
UID:10006511-1776846600-1776961800@www.kendallelectric.com
SUMMARY:Functional Safety for Machinery Technician Certification
DESCRIPTION:SAF-TUV0T presented by Rockwell Automation. \nThe standards regarding functional safety and relevant laws and directives demand that people and organizations performing responsible (accountable) tasks during relevant life cycle phases of a machine must achieve and prove required competencies. \nIn this training\, students will learn how the current standards dictate the selection\, assembly\, installation\, validation\, and maintenance of safety devices and components to reduce hazards from machinery and ensure the safety of people and the environment. Practical examples will demonstrate possibilities regarding machine protection. This training will also cover safety topics\, such as: redundancy\, testing\, distance calculations\, assigning required level of risk reduction as PL\, monitoring moveable guard positions\, and fault avoidance for relevant life cycle phases. \nAfter completing this course\, students should understand and be able to use ISO 12100\, IEC 60204-1 and other relevant machine functional safety standards. Students who want Functional Safety for Machinery Technician Certification (TÜV Rheinland) must meet all eligibility requirements and pass the exam scheduled at the end of the second day.
URL:https://www.kendallelectric.com/event/functional-safety-for-machinery-technician-certification-2/
LOCATION:Kendall Electric – Wyoming\, 1100 58th St SW\, Wyoming\, MI\, 49509\, United States
CATEGORIES:Great Lakes North,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Safety.jpg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:42.8579904;-85.6907904
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Wyoming 1100 58th St SW Wyoming MI 49509 United States;X-APPLE-RADIUS=500;X-TITLE=1100 58th St SW:geo:-85.6907904,42.8579904
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260416T083000
DTEND;TZID=America/New_York:20260417T163000
DTSTAMP:20260406T111411Z
CREATED:20260107T154411Z
LAST-MODIFIED:20260406T111411Z
UID:10006509-1776328200-1776443400@www.kendallelectric.com
SUMMARY:Studio 5000 Logix Designer Level 2: Basic Ladder Logic Programming
DESCRIPTION:CCP151 presented by Rockwell Automation. \nAfter completing this course\, you should be able to program basic ladder logic instructions for Logix5000™ controllers. This is a skill-building course that provides you with the resources and hands-on practice required to complete this objective. \nYou will have an opportunity to use the Studio 5000 Logix Designer® application to perform basic software tasks to meet the requirements of a given functional specification. In addition\, you will set up a sequencer to run equipment through a predefined procedure and separate production procedure from equipment control.
URL:https://www.kendallelectric.com/event/studio-5000-logix-designer-level-2-basic-ladder-logic-programming-51/
LOCATION:Kendall Electric – Portage\, 5101 South Sprinkle Road\, Portage\, MI\, 49002\, United States
CATEGORIES:Great Lakes South,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Software.jpg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:42.2419234;-85.5300917
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Portage 5101 South Sprinkle Road Portage MI 49002 United States;X-APPLE-RADIUS=500;X-TITLE=5101 South Sprinkle Road:geo:-85.5300917,42.2419234
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260414T083000
DTEND;TZID=America/New_York:20260415T163000
DTSTAMP:20260406T111104Z
CREATED:20260107T154337Z
LAST-MODIFIED:20260406T111104Z
UID:10006507-1776155400-1776270600@www.kendallelectric.com
SUMMARY:Studio 5000 Logix Designer Level 1: ControlLogix System Fundamentals
DESCRIPTION:CCP146 presented by Rockwell Automation. \nAfter completing this course\, you should be able to perform basic ControlLogix® and Studio 5000 Logix Designer® tasks\, such as: \n\nCreating and configuring a project\nCommunicating with a controller.\n\nThe course will assist you in developing and building a solid foundation with a fundamental knowledge of ControlLogix and other Logix5000™ systems. You will be introduced to basic Logix5000 concepts and terminology\, and you will be exposed to Logix5000 system hardware\, including hands-on experience with the ControlLogix platform.
URL:https://www.kendallelectric.com/event/studio-5000-logix-designer-level-1-controllogix-system-fundamentals-49/
LOCATION:Kendall Electric – Portage\, 5101 South Sprinkle Road\, Portage\, MI\, 49002\, United States
CATEGORIES:Great Lakes South,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Software.jpg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:42.2419234;-85.5300917
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Portage 5101 South Sprinkle Road Portage MI 49002 United States;X-APPLE-RADIUS=500;X-TITLE=5101 South Sprinkle Road:geo:-85.5300917,42.2419234
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260414T080000
DTEND;TZID=America/New_York:20260417T163000
DTSTAMP:20260413T112013Z
CREATED:20260129T151920Z
LAST-MODIFIED:20260413T112013Z
UID:10007091-1776153600-1776443400@www.kendallelectric.com
SUMMARY:PLC Wiring & Troubleshooting
DESCRIPTION:Learn how to talk through and troubleshoot PLC ladder logic using Logix5000 software in order to locate a “real” faulty input or output device\, replace it\, and get the process back up and running. It’s all about troubleshooting! \nEach attendee will actually wire the input and output (I/O) field devices to the PLC using their own PLC Trainer! \nSession Topics: \n\nEthernet communications set up using RSLinx\nDiscuss the BootP utility using an “out of the box” controller to set the IP address and configuration in RSLinx\nEthernet/IP driver: explain “RSWho views” and RSLinx configuration\nToggling and forcing real and simulated input and outputs\nTimers\, Counters\, One-Shot\nCompare blocks\, First-Scan\, Mov/Clr blocks\nMath blocks\, Set Bit Zero/Negative\nJump\, Jump to Subroutine\, Master Control Reset\nOne/two Dimension arrays\, Fill File\, Copy File\, Average File\nBit-Shift Right/Left\, First-In-First-Out\, Load/Unload\nLast-In-First-Out\, Load/Unload\, Masked Move\nSequencer Output using the Array\, Mask\, and Output Tables\nIndirect Addressing\, Add-On Instructions
URL:https://www.kendallelectric.com/event/plc-wiring-troubleshooting-22/
LOCATION:Kendall Electric – Wyoming\, 1100 58th St SW\, Wyoming\, MI\, 49509\, United States
CATEGORIES:Great Lakes North,Kendall Connected Training
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2026/02/PLC-Trainer-1-scaled.jpg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:42.8579904;-85.6907904
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Wyoming 1100 58th St SW Wyoming MI 49509 United States;X-APPLE-RADIUS=500;X-TITLE=1100 58th St SW:geo:-85.6907904,42.8579904
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260401T090000
DTEND;TZID=America/New_York:20260403T163000
DTSTAMP:20260327T190544Z
CREATED:20250911T165554Z
LAST-MODIFIED:20260327T190544Z
UID:10006989-1775034000-1775233800@www.kendallelectric.com
SUMMARY:Fundamentals of VFD 525 Wiring and Commissioning
DESCRIPTION:Learn how to install\, test\, start-up\, and troubleshoot basic PowerFlex 525 VFD applications.\nLearn how to wire\, program\, and operate Variable Frequency Drives during this three-day course that covers a combination of instructor-led discussions\, demonstrations\, and hands-on labs. \nUsing a VFD workstation\, HMI module and hand-held VFD test module\, students will leave with a better understanding of various control configurations and applications. Students will also test and troubleshoot VFDs using Fluke test and measurement equipment. \nSession Topics: \n\nPowerFlex 525 and 755TS Drive Hands Labs\nTesting VFD Power Components\nAC Motor Fundamentals and Measurements\nInstallation Considerations\nPower and Control Wiring Configurations\nVFD Application Techniques and Parameter Adjustments\nEthernet Communications Configuration\nVoltage and Current Measurements using Fluke VOM® and Clamp Ammeter
URL:https://www.kendallelectric.com/event/fundamentals-of-vfd-525-wiring-and-commissioning-6/
LOCATION:Kendall Electric – Holland\, 11581 Green Way Drive\, Holland\, MI\, 49424\, United States
CATEGORIES:Great Lakes North,Kendall Connected Training
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2025/01/drives-event-image.jpg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:42.8081538;-86.0677026
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Holland 11581 Green Way Drive Holland MI 49424 United States;X-APPLE-RADIUS=500;X-TITLE=11581 Green Way Drive:geo:-86.0677026,42.8081538
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260331T090000
DTEND;TZID=America/New_York:20260331T163000
DTSTAMP:20260327T190444Z
CREATED:20250908T204513Z
LAST-MODIFIED:20260327T190444Z
UID:10006456-1774947600-1774974600@www.kendallelectric.com
SUMMARY:Rockwell Automation Variable Frequency Drives: Backup\, Replace\, Restore\, and Redeploy
DESCRIPTION:Get hands-on experience returning failed automation equipment back to service.\nDesigned specifically for maintenance personnel and electricians\, this one-day course gives students the opportunity to work with a fully functional automated system that contains all of the target VFDs\, PanelView terminals\, PLCs\, Servos\, & industrial switches. Students will systematically one-by-one backup\, replace\, restore\, and return to service each device using detailed step-by step and pictorially illustrated labs. \nLab manuals included in this course can be used for future reference when replacing equipment on the plant floor. \nProducts covered:\nVariable Frequency Drives (VFDs)\nPowerFlex 525\, PowerFlex 755\, PowerFlex 527\nKinetix Servos\nKinetix 5300\, Kinetix 5500
URL:https://www.kendallelectric.com/event/rockwell-automation-variable-frequency-drives-backup-replace-restore-and-redeploy-21/
LOCATION:Kendall Electric – Holland\, 11581 Green Way Drive\, Holland\, MI\, 49424\, United States
CATEGORIES:Great Lakes North,Kendall Connected Training
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2025/01/drives-event-image.jpg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:42.8081538;-86.0677026
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Holland 11581 Green Way Drive Holland MI 49424 United States;X-APPLE-RADIUS=500;X-TITLE=11581 Green Way Drive:geo:-86.0677026,42.8081538
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260330T090000
DTEND;TZID=America/New_York:20260330T163000
DTSTAMP:20260327T190358Z
CREATED:20250911T173527Z
LAST-MODIFIED:20260327T190358Z
UID:10006471-1774861200-1774888200@www.kendallelectric.com
SUMMARY:Introduction to Logix PID
DESCRIPTION:Get hands-on with Logix in these 1-day instructor-led training sessions.\n\nFlexible – only choose the days you want\nScalable – classes cover various skill levels\nIndividual – students will be provided with individual lab stations\n\nSessions Available: \n\nIntro to Logix\nIntermediate Logix\nAdvanced Logix\nLogix PID\nLogix Troubleshooting
URL:https://www.kendallelectric.com/event/introduction-to-logix-pid-2/
LOCATION:Kendall Electric – Holland\, 11581 Green Way Drive\, Holland\, MI\, 49424\, United States
CATEGORIES:Great Lakes North,Kendall Connected Training
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2024/08/Workstation_Micro820-PLC-scaled.jpg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:42.8081538;-86.0677026
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Holland 11581 Green Way Drive Holland MI 49424 United States;X-APPLE-RADIUS=500;X-TITLE=11581 Green Way Drive:geo:-86.0677026,42.8081538
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260327T090000
DTEND;TZID=America/New_York:20260327T163000
DTSTAMP:20250911T172942Z
CREATED:20250911T172942Z
LAST-MODIFIED:20250911T172942Z
UID:10006469-1774602000-1774629000@www.kendallelectric.com
SUMMARY:Advanced Logix
DESCRIPTION:Get hands-on with Logix in these 1-day instructor-led training sessions.\n\nFlexible – only choose the days you want\nScalable – classes cover various skill levels\nIndividual – students will be provided with individual lab stations\n\nSessions Available: \n\nIntro to Logix\nIntermediate Logix\nAdvanced Logix\nLogix PID\nLogix Troubleshooting
URL:https://www.kendallelectric.com/event/advanced-logix-9/
LOCATION:Kendall Electric – Holland\, 11581 Green Way Drive\, Holland\, MI\, 49424\, United States
CATEGORIES:Great Lakes North,Kendall Connected Training
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2024/08/Workstation_Micro820-PLC-scaled.jpg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:42.8081538;-86.0677026
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Holland 11581 Green Way Drive Holland MI 49424 United States;X-APPLE-RADIUS=500;X-TITLE=11581 Green Way Drive:geo:-86.0677026,42.8081538
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260326T090000
DTEND;TZID=America/New_York:20260326T163000
DTSTAMP:20250911T172423Z
CREATED:20250911T172423Z
LAST-MODIFIED:20250911T172423Z
UID:10006466-1774515600-1774542600@www.kendallelectric.com
SUMMARY:Intermediate Logix Troubleshooting
DESCRIPTION:Get hands-on with Logix in these 1-day instructor-led training sessions.\n\nFlexible – only choose the days you want\nScalable – classes cover various skill levels\nIndividual – students will be provided with individual lab stations\n\nSessions Available: \n\nIntro to Logix\nIntermediate Logix\nAdvanced Logix\nLogix PID\nLogix Troubleshooting
URL:https://www.kendallelectric.com/event/intermediate-logix-troubleshooting-10/
LOCATION:Kendall Electric – Holland\, 11581 Green Way Drive\, Holland\, MI\, 49424\, United States
CATEGORIES:Great Lakes North,Kendall Connected Training
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2024/08/Workstation_Micro820-PLC-scaled.jpg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:42.8081538;-86.0677026
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Holland 11581 Green Way Drive Holland MI 49424 United States;X-APPLE-RADIUS=500;X-TITLE=11581 Green Way Drive:geo:-86.0677026,42.8081538
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260325T090000
DTEND;TZID=America/New_York:20260325T163000
DTSTAMP:20250911T171914Z
CREATED:20250911T171914Z
LAST-MODIFIED:20250911T171914Z
UID:10006463-1774429200-1774456200@www.kendallelectric.com
SUMMARY:Intermediate Logix
DESCRIPTION:Get hands-on with Logix in these 1-day instructor-led training sessions.\n\nFlexible – only choose the days you want\nScalable – classes cover various skill levels\nIndividual – students will be provided with individual lab stations\n\nSessions Available: \n\nIntro to Logix\nIntermediate Logix\nAdvanced Logix\nLogix PID\nLogix Troubleshooting
URL:https://www.kendallelectric.com/event/intermediate-logix-16/
LOCATION:Kendall Electric – Holland\, 11581 Green Way Drive\, Holland\, MI\, 49424\, United States
CATEGORIES:Great Lakes North,Kendall Connected Training
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2024/08/Workstation_Micro820-PLC-scaled.jpg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:42.8081538;-86.0677026
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Holland 11581 Green Way Drive Holland MI 49424 United States;X-APPLE-RADIUS=500;X-TITLE=11581 Green Way Drive:geo:-86.0677026,42.8081538
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260324T090000
DTEND;TZID=America/New_York:20260324T163000
DTSTAMP:20250911T171500Z
CREATED:20250911T171500Z
LAST-MODIFIED:20250911T171500Z
UID:10006991-1774342800-1774369800@www.kendallelectric.com
SUMMARY:Intro to Logix Troubleshooting
DESCRIPTION:Get hands-on with Logix in these 1-day instructor-led training sessions.\n\nFlexible – only choose the days you want\nScalable – classes cover various skill levels\nIndividual – students will be provided with individual lab stations\n\nSessions Available: \n\nIntro to Logix\nIntermediate Logix\nAdvanced Logix\nLogix PID\nLogix Troubleshooting
URL:https://www.kendallelectric.com/event/intro-to-logix-troubleshooting-15/
LOCATION:Kendall Electric – Holland\, 11581 Green Way Drive\, Holland\, MI\, 49424\, United States
CATEGORIES:Great Lakes North,Kendall Connected Training
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2024/08/Workstation_Micro820-PLC-scaled.jpg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:42.8081538;-86.0677026
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Holland 11581 Green Way Drive Holland MI 49424 United States;X-APPLE-RADIUS=500;X-TITLE=11581 Green Way Drive:geo:-86.0677026,42.8081538
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260323T090000
DTEND;TZID=America/New_York:20260323T163000
DTSTAMP:20260107T184142Z
CREATED:20250911T170236Z
LAST-MODIFIED:20260107T184142Z
UID:10006990-1774256400-1774283400@www.kendallelectric.com
SUMMARY:Intro to Logix
DESCRIPTION:Get hands-on with Logix in these 1-day instructor-led training sessions.\n\nFlexible – only choose the days you want\nScalable – classes cover various skill levels\nIndividual – students will be provided with individual lab stations\n\nSessions Available: \n\nIntro to Logix\nIntermediate Logix\nAdvanced Logix\nLogix PID\nLogix Troubleshooting
URL:https://www.kendallelectric.com/event/intro-to-logix-22/
LOCATION:Kendall Electric – Holland\, 11581 Green Way Drive\, Holland\, MI\, 49424\, United States
CATEGORIES:Great Lakes North,Kendall Connected Training
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2024/08/Workstation_Micro820-PLC-scaled.jpg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:42.8081538;-86.0677026
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Holland 11581 Green Way Drive Holland MI 49424 United States;X-APPLE-RADIUS=500;X-TITLE=11581 Green Way Drive:geo:-86.0677026,42.8081538
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260317T083000
DTEND;TZID=America/New_York:20260319T163000
DTSTAMP:20260728T225111Z
CREATED:20250715T194450Z
LAST-MODIFIED:20260728T225111Z
UID:10006953-1773736200-1773937800@www.kendallelectric.com
SUMMARY:Ethernet/IP Configuration and Troubleshooting
DESCRIPTION:CCP183 presented by Rockwell Automation. \nThis course should prepare you to effectively: \n\nConfigure a Stratix® switch (5700\, 8000\, and/or 8300) to meet a variety of network requirements\nAssign IP addresses to devices on an EtherNet/IP network using rotary switches and a variety of software\nMonitor switch performance and status\nDiagnose and resolve issues with switches and devices on a network\n\nDuring switch configuration\, you will have an opportunity to: \n\nConfigure a switch using both the Device Manager Web Interface and Studio 5000 Logix Designer® software\nSet up one-to-one IP address translation (NAT) for segmenting machine-level network devices from the plant network\nSecure and limit access to a switch\n\nOnce the EtherNet/IP network is up and running\, you will monitor diagnostic information using web-based technologies and modify a web server module’s data views and tag values. You will resolve issues with communication between devices on a network. You will troubleshoot an EtherNet/ IP network’s media and components (including the Stratix 5700 switch); run diagnostic tests to resolve system and port issues; and perform common functions such as resetting the switch.
URL:https://www.kendallelectric.com/event/ethernet-ip-configuration-and-troubleshooting-19/
LOCATION:Galloup – Wyoming\, 3838 Clay Avenue SW\, Wyoming\, MI\, 49548\, United States
CATEGORIES:Great Lakes North,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Networking.jpg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:42.8938509;-85.6763234
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Galloup – Wyoming 3838 Clay Avenue SW Wyoming MI 49548 United States;X-APPLE-RADIUS=500;X-TITLE=3838 Clay Avenue SW:geo:-85.6763234,42.8938509
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260310T083000
DTEND;TZID=America/New_York:20260312T163000
DTSTAMP:20260102T165443Z
CREATED:20250715T194025Z
LAST-MODIFIED:20260102T165443Z
UID:10006952-1773131400-1773333000@www.kendallelectric.com
SUMMARY:GuardLogix Application Development and Troubleshooting
DESCRIPTION:SAF-LOG104 presented by Rockwell Automation. \nUpon completion of this course\, you will be able to create a Studio 5000 Logix Designer® project for a GuardLogix® system and troubleshoot a previously operational GuardLogix system. \nYou will have the opportunity to develop and practice these skills by: \n\nLearning GuardLogix concepts and terminology\nCreating and configuring a GuardLogix project:\nAdding and configuring CompactBlock™ Guard I/O™ POINT Guard I/O™ safety modules:\nGenerating Safety Signatures and locking/unlocking a GuardLogix controller\nProgramming safety instructions\nTroubleshooting a GuardLogix project
URL:https://www.kendallelectric.com/event/guardlogix-application-development-and-troubleshooting-18/
LOCATION:Galloup – Wyoming\, 3838 Clay Avenue SW\, Wyoming\, MI\, 49548\, United States
CATEGORIES:Great Lakes North,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Safety.jpg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:42.8938509;-85.6763234
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Galloup – Wyoming 3838 Clay Avenue SW Wyoming MI 49548 United States;X-APPLE-RADIUS=500;X-TITLE=3838 Clay Avenue SW:geo:-85.6763234,42.8938509
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260304T080000
DTEND;TZID=America/New_York:20260304T120000
DTSTAMP:20260303T161539Z
CREATED:20251117T205006Z
LAST-MODIFIED:20260303T161539Z
UID:10006487-1772611200-1772625600@www.kendallelectric.com
SUMMARY:NFPA 70E Arc Flash and Electrical Safety Awareness
DESCRIPTION:Everyone has responsibility for electrical safety in the workplace\, and this in-depth training will provide you with the ability to identify Arc Flash and electrical safety hazards. You will learn techniques and best practices to limit exposure to these identified hazards. Key concepts presented in this course include: \n\nHazards related to an Arc Flash/Blast\nIndustry recognized standards and regulations­—NFPA 70E\nWorker protection and OSHA compliance\nWorkplace practices to limit hazard exposure and risk\nArc Flash risk reduction solutions\n\nDuring this four hour training\, you will acquire the necessary safety detection skills\, enabling you to protect both yourself and your fellow employees.
URL:https://www.kendallelectric.com/event/nfpa-70e-arc-flash-and-electrical-safety-awareness-13/
LOCATION:Microsoft Teams\, United States
CATEGORIES:Great Lakes North,Great Lakes South,Kendall Connected Training,Mid-Atlantic,NFPA70E,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_Arcflash.jpg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260303T083000
DTEND;TZID=America/New_York:20260306T163000
DTSTAMP:20260102T165455Z
CREATED:20250715T193720Z
LAST-MODIFIED:20260102T165455Z
UID:10006951-1772526600-1772814600@www.kendallelectric.com
SUMMARY:Industrial Electrical Controls Fundamentals
DESCRIPTION:MFG213 presented by Rockwell Automation. \nThis course is designed to provide knowledge and skills required to install\, maintain and troubleshoot machine controls. \nAt the completion of this course\, you will be able to: \n\nDefine the safety considerations that must be observed when installing\, checking or locking out electrical equipment\nDefine uses and functions of input and output devices\, relays\, and motors\nDemonstrate the reading of schematic diagrams and logic\nDefine an open and short condition and perform voltage and current measurements\nDemonstrate the proper use of the following test equipment in lab to measure voltage\, current\, resistance and continuity: VOM\, DVM\, Multi-meters\, continuity tester and amp probe\nApproximate secondary voltage\, secondary current and primary current of a transformer when given its turns ratio\, primary voltage and secondary load\nIdentify the proper wiring configurations of a control transformer’s primary current for 240V and 480V operation\nApproximate a transformer’s maximum primary current for 480V operation\, using the nameplate information
URL:https://www.kendallelectric.com/event/industrial-electrical-controls-fundamentals-19/
LOCATION:Kendall Electric – Portage\, 5101 South Sprinkle Road\, Portage\, MI\, 49002\, United States
CATEGORIES:Great Lakes South,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Networking.jpg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:42.2419234;-85.5300917
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Portage 5101 South Sprinkle Road Portage MI 49002 United States;X-APPLE-RADIUS=500;X-TITLE=5101 South Sprinkle Road:geo:-85.5300917,42.2419234
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260226T083000
DTEND;TZID=America/New_York:20260227T163000
DTSTAMP:20260102T165508Z
CREATED:20250715T193311Z
LAST-MODIFIED:20260102T165508Z
UID:10006950-1772094600-1772209800@www.kendallelectric.com
SUMMARY:Studio 5000 Logix Designer Level 2: Basic Ladder Logic Programming
DESCRIPTION:CCP151 presented by Rockwell Automation. \nAfter completing this course\, you should be able to program basic ladder logic instructions for Logix5000™ controllers. \nThis is a skill-building course that provides you with the resources and hands-on practice required to complete this objective. You will have an opportunity to use the Studio 5000 Logix Designer® application to perform basic software tasks to meet the requirements of a given functional specification. In addition\, you will set up a sequencer to run equipment through a predefined procedure and separate production procedure from equipment control.
URL:https://www.kendallelectric.com/event/studio-5000-logix-designer-level-2-basic-ladder-logic-programming-48/
LOCATION:Kendall Electric – Midland\, 3240 Schuette Road\, Midland\, MI\, 48642\, United States
CATEGORIES:Great Lakes North,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Software.jpg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:43.5985761;-84.1884677
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Midland 3240 Schuette Road Midland MI 48642 United States;X-APPLE-RADIUS=500;X-TITLE=3240 Schuette Road:geo:-84.1884677,43.5985761
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260225T090000
DTEND;TZID=America/New_York:20260227T163000
DTSTAMP:20250911T164151Z
CREATED:20250911T164151Z
LAST-MODIFIED:20250911T164151Z
UID:10006988-1772010000-1772209800@www.kendallelectric.com
SUMMARY:Fundamentals of VFD 525 Wiring and Commissioning
DESCRIPTION:Learn how to install\, test\, start-up\, and troubleshoot basic PowerFlex 525 VFD applications.\nLearn how to wire\, program\, and operate Variable Frequency Drives during this three-day course that covers a combination of instructor-led discussions\, demonstrations\, and hands-on labs. \nUsing a VFD workstation\, HMI module and hand-held VFD test module\, students will leave with a better understanding of various control configurations and applications. Students will also test and troubleshoot VFDs using Fluke test and measurement equipment. \nSession Topics: \n\nPowerFlex 525 and 755TS Drive Hands Labs\nTesting VFD Power Components\nAC Motor Fundamentals and Measurements\nInstallation Considerations\nPower and Control Wiring Configurations\nVFD Application Techniques and Parameter Adjustments\nEthernet Communications Configuration\nVoltage and Current Measurements using Fluke VOM® and Clamp Ammeter
URL:https://www.kendallelectric.com/event/fundamentals-of-vfd-525-wiring-and-commissioning-5/
LOCATION:Kendall Electric – Portage\, 5101 South Sprinkle Road\, Portage\, MI\, 49002\, United States
CATEGORIES:Great Lakes South,Kendall Connected Training
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2025/01/drives-event-image.jpg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:42.2419234;-85.5300917
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Portage 5101 South Sprinkle Road Portage MI 49002 United States;X-APPLE-RADIUS=500;X-TITLE=5101 South Sprinkle Road:geo:-85.5300917,42.2419234
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260224T090000
DTEND;TZID=America/New_York:20260224T163000
DTSTAMP:20251105T185611Z
CREATED:20250908T203327Z
LAST-MODIFIED:20251105T185611Z
UID:10006455-1771923600-1771950600@www.kendallelectric.com
SUMMARY:Rockwell Automation Variable Frequency Drives: Backup\, Replace\, Restore\, and Redeploy
DESCRIPTION:Get hands-on experience returning failed automation equipment back to service.\nDesigned specifically for maintenance personnel and electricians\, this one-day course gives students the opportunity to work with a fully functional automated system that contains all of the target VFDs\, PanelView terminals\, PLCs\, Servos\, & industrial switches. Students will systematically one-by-one backup\, replace\, restore\, and return to service each device using detailed step-by step and pictorially illustrated labs. \nLab manuals included in this course can be used for future reference when replacing equipment on the plant floor. \nProducts covered:\nVariable Frequency Drives (VFDs)\nPowerFlex 525\, PowerFlex 755\, PowerFlex 527\nKinetix Servos\nKinetix 5300\, Kinetix 5500
URL:https://www.kendallelectric.com/event/rockwell-automation-variable-frequency-drives-backup-replace-restore-and-redeploy-20/
LOCATION:Kendall Electric – Portage\, 5101 South Sprinkle Road\, Portage\, MI\, 49002\, United States
CATEGORIES:Great Lakes South,Kendall Connected Training
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2025/01/drives-event-image.jpg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:42.2419234;-85.5300917
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Portage 5101 South Sprinkle Road Portage MI 49002 United States;X-APPLE-RADIUS=500;X-TITLE=5101 South Sprinkle Road:geo:-85.5300917,42.2419234
END:VEVENT
END:VCALENDAR