BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//Kendall Electric - ECPv6.17.1//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-ORIGINAL-URL:https://www.kendallelectric.com
X-WR-CALDESC:Events for Kendall Electric
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:America/New_York
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20230312T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20231105T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20240310T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20241103T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20250309T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20251102T060000
END:STANDARD
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:UTC
BEGIN:STANDARD
TZOFFSETFROM:+0000
TZOFFSETTO:+0000
TZNAME:UTC
DTSTART:20220101T000000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240820T083000
DTEND;TZID=America/New_York:20240822T163000
DTSTAMP:20240603T143341Z
CREATED:20240130T213728Z
LAST-MODIFIED:20240603T143341Z
UID:10006190-1724142600-1724344200@www.kendallelectric.com
SUMMARY:Motion Control Fundamentals using Kinetix 5700(CIP) Servo Drives
DESCRIPTION:CCN132 presented by Rockwell Automation. Upon completion of this course\, you should be able to demonstrate fundamental motion control concepts common to all Rockwell Automation motion control systems. This course is designed to provide you with an understanding of the concepts\, terminology\, functionality\, and applications of motion control. \nThis course will also allow you to establish the foundation you need before learning the skills necessary to maintain and program motion control systems. This course does not address motion control system design or specific motion control software programming. If you are seeking training in these areas\, you should enroll in the relevant Rockwell Automation training courses\, making sure you have fulfilled the prerequisites for those courses prior to enrollment.
URL:https://www.kendallelectric.com/event/motion-control-fundamentals-using-kinetix-5700cip-servo-drives/
LOCATION:Kendall Electric – Wyoming\, 1100 58th St SW\, Wyoming\, MI\, 49509\, United States
CATEGORIES:Great Lakes North,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Motion-Control.jpg
ORGANIZER;CN="Camie White":MAILTO:camie.white@kendallelectric.com
GEO:42.8579904;-85.6907904
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Wyoming 1100 58th St SW Wyoming MI 49509 United States;X-APPLE-RADIUS=500;X-TITLE=1100 58th St SW:geo:-85.6907904,42.8579904
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240808T083000
DTEND;TZID=America/New_York:20240809T163000
DTSTAMP:20240603T143815Z
CREATED:20240130T213530Z
LAST-MODIFIED:20240603T143815Z
UID:10006186-1723105800-1723221000@www.kendallelectric.com
SUMMARY:Studio 5000 Logix Designer Level 2: Basic Ladder Logic Programming
DESCRIPTION:CCP151 presented by Rockwell Automation. After completing this course\, you should be able to program basic ladder logic instructions for Logix5000™ controllers. This is a skill-building course that provides you with the resources and hands-on practice required to complete this objective. You will have an opportunity to use the Studio 5000 Logix Designer® application to perform basic software tasks to meet the requirements of a given functional specification. In addition\, you will set up a sequencer to run equipment through a predefined procedure and separate production procedure from equipment control.
URL:https://www.kendallelectric.com/event/studio-5000-logix-designer-level-2-basic-ladder-logic-programming-14/
LOCATION:Kendall Electric – Wyoming\, 1100 58th St SW\, Wyoming\, MI\, 49509\, United States
CATEGORIES:Great Lakes North,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Software.jpg
ORGANIZER;CN="Camie White":MAILTO:camie.white@kendallelectric.com
GEO:42.8579904;-85.6907904
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Wyoming 1100 58th St SW Wyoming MI 49509 United States;X-APPLE-RADIUS=500;X-TITLE=1100 58th St SW:geo:-85.6907904,42.8579904
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240806T083000
DTEND;TZID=America/New_York:20240807T163000
DTSTAMP:20240603T143956Z
CREATED:20240130T213445Z
LAST-MODIFIED:20240603T143956Z
UID:10006185-1722933000-1723048200@www.kendallelectric.com
SUMMARY:Studio 5000 Logix Designer Level 1: ControlLogix System Fundamentals
DESCRIPTION:CCP146 presented by Rockwell Automation. After completing this course\, you should be able to perform basic ControlLogix® and Studio 5000 Logix Designer® tasks\, such as:\n• Creating and configuring a project\n• Communicating with a controller. \nThe course will assist you in developing and building a solid foundation with a fundamental knowledge of ControlLogix and other Logix5000™ systems. You will be introduced to basic Logix5000 concepts and terminology\, and you will be exposed to Logix5000 system hardware\, including hands-on experience with the ControlLogix platform.
URL:https://www.kendallelectric.com/event/studio-5000-logix-designer-level-1-controllogix-system-fundamentals-13/
LOCATION:Kendall Electric – Wyoming\, 1100 58th St SW\, Wyoming\, MI\, 49509\, United States
CATEGORIES:Great Lakes North,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Software.jpg
ORGANIZER;CN="Camie White":MAILTO:camie.white@kendallelectric.com
GEO:42.8579904;-85.6907904
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Wyoming 1100 58th St SW Wyoming MI 49509 United States;X-APPLE-RADIUS=500;X-TITLE=1100 58th St SW:geo:-85.6907904,42.8579904
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240730T083000
DTEND;TZID=America/New_York:20240801T163000
DTSTAMP:20240603T144410Z
CREATED:20240130T212215Z
LAST-MODIFIED:20240603T144410Z
UID:10006182-1722328200-1722529800@www.kendallelectric.com
SUMMARY:GuardLogix Application Development and Troubleshooting
DESCRIPTION:SAF-LOG104 presented by Rockwell Automation. Upon completion of this course\, you will be able to create a Studio 5000 Logix Designer® project for a GuardLogix® system and troubleshoot a previously operational GuardLogix system. \nYou will have the opportunity to develop and practice these skills by:\n• Learning GuardLogix concepts and terminology\n• Creating and configuring a GuardLogix project\n• Adding and configuring CompactBlock™ Guard I/O™ and POINT Guard I/O™ safety modules\n• Generating Safety Signatures and locking/unlocking a GuardLogix controller\n• Programming safety instructions\n• Troubleshooting a GuardLogix project
URL:https://www.kendallelectric.com/event/guardlogix-application-development-and-troubleshooting-7/
LOCATION:Kendall Electric – Wyoming\, 1100 58th St SW\, Wyoming\, MI\, 49509\, United States
CATEGORIES:Great Lakes North,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Safety.jpg
ORGANIZER;CN="Camie White":MAILTO:camie.white@kendallelectric.com
GEO:42.8579904;-85.6907904
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Wyoming 1100 58th St SW Wyoming MI 49509 United States;X-APPLE-RADIUS=500;X-TITLE=1100 58th St SW:geo:-85.6907904,42.8579904
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240711T083000
DTEND;TZID=America/New_York:20240712T163000
DTSTAMP:20240606T203029Z
CREATED:20240130T211745Z
LAST-MODIFIED:20240606T203029Z
UID:10006178-1720686600-1720801800@www.kendallelectric.com
SUMMARY:Studio 5000 Logix Designer Level 4: Structured Text/Sequential Function Chart Programming
DESCRIPTION:CCP154 presented by Rockwell Automation. Building on your project development skills\, such as creating tags and programming control code\, this course provides the skills and knowledge to program using the structured text and sequential function chart programming languages. You will learn how to select instructions\, expressions and constructs and then enter these elements and more into a routine. You will have an opportunity to translate a functional specification in to a sequential function chart. Also\, you will learn how to test sequential function chart logic using forces and step throughs. The instructor will demonstrate the relevant procedures required to program with structured text and sequential function charts. You will be provided ample opportunities to create and test their own projects.
URL:https://www.kendallelectric.com/event/studio-5000-loigx-designer-level-4-structured-text-sequential-function-chart-programming/
LOCATION:Kendall Electric – Wyoming\, 1100 58th St SW\, Wyoming\, MI\, 49509\, United States
CATEGORIES:Great Lakes North,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Software.jpg
ORGANIZER;CN="Camie White":MAILTO:camie.white@kendallelectric.com
GEO:42.8579904;-85.6907904
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Wyoming 1100 58th St SW Wyoming MI 49509 United States;X-APPLE-RADIUS=500;X-TITLE=1100 58th St SW:geo:-85.6907904,42.8579904
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240709T083000
DTEND;TZID=America/New_York:20240710T163000
DTSTAMP:20240603T150037Z
CREATED:20240130T211610Z
LAST-MODIFIED:20240603T150037Z
UID:10006176-1720513800-1720629000@www.kendallelectric.com
SUMMARY:Studio 5000 Logix Designer Level 4: Function Block Programming
DESCRIPTION:CCP152 presented by Rockwell Automation. This course is a skill-building programming course that provides you with an understanding of Studio 5000 Logix Designer® function block diagrams and terminology. This course also provides you with the resources and hands-on practice required to efficiently program a Logix5000™ controller using function block diagrams. You will have an opportunity to use Logix Designer application and perform software tasks to meet the requirements of a given functional specification. In addition to using function blocks\, you will perform parameter modifications to individual function block instructions\, as well as create and develop function block diagram programs and routines. You will also gain experience with a variety of function block instructions\, including PIDE and add-on instructions.
URL:https://www.kendallelectric.com/event/studio-5000-logix-designer-level-4-function-block-programming-3/
LOCATION:Kendall Electric – Wyoming\, 1100 58th St SW\, Wyoming\, MI\, 49509\, United States
CATEGORIES:Great Lakes North,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Software.jpg
ORGANIZER;CN="Camie White":MAILTO:camie.white@kendallelectric.com
GEO:42.8579904;-85.6907904
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Wyoming 1100 58th St SW Wyoming MI 49509 United States;X-APPLE-RADIUS=500;X-TITLE=1100 58th St SW:geo:-85.6907904,42.8579904
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240612T090000
DTEND;TZID=America/New_York:20240614T163000
DTSTAMP:20240228T150328Z
CREATED:20240214T201556Z
LAST-MODIFIED:20240228T150328Z
UID:10005976-1718182800-1718382600@www.kendallelectric.com
SUMMARY:Fundamentals of PowerFlex525 VFD Wiring and Commissioning
DESCRIPTION:Learn how to wire\, program\, and operate Variable Frequency Drives during this three-day course that covers a combination of instructor-led discussions\, demonstrations\, and hands-on labs. Using a VFD workstation\, HMI module and hand-held VFD test module\, students will leave with a better understanding of various control configurations and applications. Students will also test and troubleshoot VFDs using Fluke test and measurement equipment.
URL:https://www.kendallelectric.com/event/fundamentals-of-powerflex525-vfd-wiring-and-commissioning-9/
LOCATION:Kendall Electric – Wyoming\, 1100 58th St SW\, Wyoming\, MI\, 49509\, United States
CATEGORIES:Great Lakes North,Kendall Connected Training
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_KCT_Powerflex525.jpg
ORGANIZER;CN="Camie White":MAILTO:camie.white@kendallelectric.com
GEO:42.8579904;-85.6907904
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Wyoming 1100 58th St SW Wyoming MI 49509 United States;X-APPLE-RADIUS=500;X-TITLE=1100 58th St SW:geo:-85.6907904,42.8579904
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240611T090000
DTEND;TZID=America/New_York:20240611T163000
DTSTAMP:20240214T201750Z
CREATED:20240214T201750Z
LAST-MODIFIED:20240214T201750Z
UID:10005978-1718096400-1718123400@www.kendallelectric.com
SUMMARY:Rockwell Automation Variable Frequency Drives: Backup\, Replace\, Restore\, and Redeploy
DESCRIPTION:Designed specifically for maintenance personnel and electricians\, this one-day course gives students the opportunity to work with a fully functional automated system that contains all of the target VFDs\, PanelView terminals\, PLCs\, Servos\, & industrial switches. Students will\nsystematically one-by-one backup\, replace\, restore\, and return to service each device using detailed step-by step and pictorially illustrated labs. \nLab manuals included in this course can be used for future reference when replacing equipment on the plant floor.
URL:https://www.kendallelectric.com/event/rockwell-automation-variable-frequency-drives-backup-replace-restore-and-redeploy-2/
LOCATION:Kendall Electric – Wyoming\, 1100 58th St SW\, Wyoming\, MI\, 49509\, United States
CATEGORIES:Great Lakes North,Kendall Connected Training
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2024/02/VFD-Backup.jpg
ORGANIZER;CN="Camie White":MAILTO:camie.white@kendallelectric.com
GEO:42.8579904;-85.6907904
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Wyoming 1100 58th St SW Wyoming MI 49509 United States;X-APPLE-RADIUS=500;X-TITLE=1100 58th St SW:geo:-85.6907904,42.8579904
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240610T090000
DTEND;TZID=America/New_York:20240610T163000
DTSTAMP:20240214T204336Z
CREATED:20240214T203546Z
LAST-MODIFIED:20240214T204336Z
UID:10006262-1718010000-1718037000@www.kendallelectric.com
SUMMARY:Rockwell Automation HMIs: Backup\, Replace\, Restore\, and Redeploy
DESCRIPTION:Designed specifically for maintenance personnel and electricians\, this one-day course gives students the opportunity to work with a fully functional automated system that contains all of the target VFDs\, PanelView terminals\, PLCs\, Servos\, & industrial switches. Students will\nsystematically one-by-one backup\, replace\, restore\, and return to service each device using detailed step-by step and pictorially illustrated labs. \nLab manuals included in this course can be used for future reference when replacing equipment on the plant floor.
URL:https://www.kendallelectric.com/event/rockwell-automation-hmis-backup-replace-restore-and-redeploy-4/
LOCATION:Kendall Electric – Wyoming\, 1100 58th St SW\, Wyoming\, MI\, 49509\, United States
CATEGORIES:Great Lakes North,Kendall Connected Training
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2024/02/VFD-Backup.jpg
ORGANIZER;CN="Camie White":MAILTO:camie.white@kendallelectric.com
GEO:42.8579904;-85.6907904
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Wyoming 1100 58th St SW Wyoming MI 49509 United States;X-APPLE-RADIUS=500;X-TITLE=1100 58th St SW:geo:-85.6907904,42.8579904
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240604T080000
DTEND;TZID=America/New_York:20240607T163000
DTSTAMP:20240625T140700Z
CREATED:20240201T211436Z
LAST-MODIFIED:20240625T140700Z
UID:10006205-1717488000-1717777800@www.kendallelectric.com
SUMMARY:PLC Wiring & Troubleshooting
DESCRIPTION:Learn how to talk through and troubleshoot PLC ladder logic using Logix5000 software in order to locate a “real” faulty input or output device\, replace it\, and get the process back up and running. It’s all about troubleshooting! Each attendee will actually wire the input and output (I/O) field devices to the PLC using their own PLC Trainer. \nSession Topics: \n• Ethernet communications set up using RSLinx\n• Discuss the BootP utility using an “out of the box” controller to set the IP address and configuration in RSLinx\n• Ethernet/IP driver: explain “RSWho views” and RSLinx configuration\n• Toggling and forcing real and simulated inputs and outputs\n• Timers\, Counters\, One-Shot\n• Compare blocks\, First-Scan\, Mov/Clr blocks\n• Math blocks\, Set Bit Zero/Negative\n• Jump\, Jump to Subroutine\, Master Control Reset\n• One/two Dimension arrays\, Fill File\, Copy File\, Average File\n• Bit-Shift Right/Left\, First-In-First-Out\, Load/Unload\n• Last-In-First-Out\, Load/Unload\, Masked Move\n• Sequencer Output using the Array\, Mask\, and Output Tables\n• Indirect Addressing\, Add-On Instructions
URL:https://www.kendallelectric.com/event/plc-wiring-troubleshooting-8/
LOCATION:Kendall Electric – Wyoming\, 1100 58th St SW\, Wyoming\, MI\, 49509\, United States
CATEGORIES:Great Lakes North,Kendall Connected Training
ATTACH;FMTTYPE=image/gif:https://www.kendallelectric.com/wp-content/uploads/2023/09/Training_KCT_PLC.gif
ORGANIZER;CN="Camie White":MAILTO:camie.white@kendallelectric.com
GEO:42.8579904;-85.6907904
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Wyoming 1100 58th St SW Wyoming MI 49509 United States;X-APPLE-RADIUS=500;X-TITLE=1100 58th St SW:geo:-85.6907904,42.8579904
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240531T070000
DTEND;TZID=America/New_York:20240531T100000
DTSTAMP:20240517T163056Z
CREATED:20240415T152517Z
LAST-MODIFIED:20240517T163056Z
UID:10006082-1717138800-1717149600@www.kendallelectric.com
SUMMARY:Medium Voltage Term and Splicing
DESCRIPTION:Join us for an in-depth discussion on installation best practices. This session will cover underground cable\, 200A loadbreak\, 600A deadbreak\, arresters\, and terminations. \nAttendees will leave with a better understanding of proper installation\, which install tools to use\, and how to adjust. Our instructor will coach you on how to prep cable to install an elbow or termination during the hands-on portion. \nSession Topics: \n• Installation Best Practice\n• Installation Tools\n• Underground Cable\n• 600A Deadbreak\n• Arresters\n• Terminations \nThis class is also being offered May 30 in Portage\, MI.
URL:https://www.kendallelectric.com/event/medium-voltage-term-and-splicing-4/
LOCATION:Kendall Electric – Wyoming\, 1100 58th St SW\, Wyoming\, MI\, 49509\, United States
CATEGORIES:Great Lakes North,Kendall Technology Update
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Safety.jpg
ORGANIZER;CN="Marketing":MAILTO:marketing@kendallelectric.com
GEO:42.8579904;-85.6907904
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Wyoming 1100 58th St SW Wyoming MI 49509 United States;X-APPLE-RADIUS=500;X-TITLE=1100 58th St SW:geo:-85.6907904,42.8579904
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240508T083000
DTEND;TZID=America/New_York:20240509T163000
DTSTAMP:20240415T120946Z
CREATED:20231102T183553Z
LAST-MODIFIED:20240415T120946Z
UID:10006098-1715157000-1715272200@www.kendallelectric.com
SUMMARY:Functional Safety for Machinery Technician Certification (TÜV Rheinland)
DESCRIPTION:SAF-TUV0T presented by Rockwell Automation. The standards regarding functional safety and relevant laws and directives demand that people and organizations performing responsible (accountable) tasks during relevant life cycle phases of a machine must achieve and prove required competencies. \nIn this training\, students will learn how the current standards dictate the selection\, assembly\, installation\, validation\, and maintenance of safety devices and components to reduce hazards from machinery and ensure the safety of people and the environment. Practical examples will demonstrate possibilities regarding machine protection. \nThis training will also cover safety topics\, such as: redundancy\, testing\, distance calculations\, assigning required level of risk reduction as PL\, monitoring moveable guard positions\, and fault avoidance for relevant life cycle phases. After completing this course\, students should understand and be able to use ISO 12100\, IEC 60204-1 and other relevant machine functional safety standards. \nStudents who want Functional Safety for Machinery Technician Certification (TÜV Rheinland) must meet all eligibility requirements and pass the exam scheduled at the end of the second day. \nLimited time offer: Register before January 31\, 2024 to receive a 10% discount making the cost $3\,300 per student.
URL:https://www.kendallelectric.com/event/functional-safety-for-machinery-technician-certification-tuv-rheinland/
LOCATION:Kendall Electric – Wyoming\, 1100 58th St SW\, Wyoming\, MI\, 49509\, United States
CATEGORIES:Great Lakes North,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Safety.jpg
ORGANIZER;CN="Camie White":MAILTO:camie.white@kendallelectric.com
GEO:42.8579904;-85.6907904
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Wyoming 1100 58th St SW Wyoming MI 49509 United States;X-APPLE-RADIUS=500;X-TITLE=1100 58th St SW:geo:-85.6907904,42.8579904
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240423T083000
DTEND;TZID=America/New_York:20240425T163000
DTSTAMP:20240131T193455Z
CREATED:20240130T210413Z
LAST-MODIFIED:20240131T193455Z
UID:10005949-1713861000-1714062600@www.kendallelectric.com
SUMMARY:EtherNet/IP Configuration and Troubleshooting
DESCRIPTION:CCP183 presented by Rockwell Automation. \nThis course should prepare you to effectively:\n• Configure a Stratix® switch (5700\, 8000\, and/or 8300) to meet a variety of network requirements\n• Assign IP addresses to devices on an EtherNet/IP network using rotary switches and a variety of software\n• Monitor switch performance and status\n• Diagnose and resolve issues with switches and devices on a network \nDuring switch configuration\, you will have an opportunity to:\n• Configure a switch using both the Device Manager Web Interface and Studio 5000 Logix Designer® software\n• Set up one-to-one IP address translation (NAT) for segmenting machine-level network devices from the plant network\n• Secure and limit access to a switch \nOnce the EtherNet/IP network is up and running\, you will monitor diagnostic information using web-based technologies and modify a web server module’s data views and tag values. You will resolve issues with communication between devices on a network. You will troubleshoot an EtherNet/ IP network’s media and components (including the Stratix 5700 switch); run diagnostic tests to resolve system and port issues; and perform common functions such as resetting the switch.
URL:https://www.kendallelectric.com/event/ethernet-ip-configuration-and-troubleshooting-5/
LOCATION:Kendall Electric – Wyoming\, 1100 58th St SW\, Wyoming\, MI\, 49509\, United States
CATEGORIES:Great Lakes North,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Networking.jpg
ORGANIZER;CN="Camie White":MAILTO:camie.white@kendallelectric.com
GEO:42.8579904;-85.6907904
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Wyoming 1100 58th St SW Wyoming MI 49509 United States;X-APPLE-RADIUS=500;X-TITLE=1100 58th St SW:geo:-85.6907904,42.8579904
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240312T083000
DTEND;TZID=America/New_York:20240315T163000
DTSTAMP:20231204T160004Z
CREATED:20230927T145234Z
LAST-MODIFIED:20231204T160004Z
UID:10006038-1710232200-1710520200@www.kendallelectric.com
SUMMARY:Studio 5000 Logix Designer Level 3: Project Development
DESCRIPTION:CCP143 presented by Rockwell Automation. Upon completion of this course\, given a functional specification for a Logix5000™ application\, you should be able to develop a project to meet the specification requirements. \nThis course covers tasks common to the following hardware\, which all use the Logix5000 control engine:\n• ControlLogix® controllers\n• CompactLogix™ controllers\n• SoftLogix™ controllers \nThis course builds upon your knowledge of common controller terms and operation and your experience with basic ladder logic programming. You can gain a deeper understanding of project development tasks that are common to all Logix5000 controllers. Such tasks include organizing tasks and routines\, organizing controller data\, configuring modules\, and sharing data. You will also use producer/consumer technology for multicasting to input and output devices\, sharing data between controllers\, and controlling remote I/O.
URL:https://www.kendallelectric.com/event/studio-5000-logix-designer-level-3-project-development-5/
LOCATION:Kendall Electric – Wyoming\, 1100 58th St SW\, Wyoming\, MI\, 49509\, United States
CATEGORIES:Great Lakes North,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Software.jpg
ORGANIZER;CN="Camie White":MAILTO:camie.white@kendallelectric.com
GEO:42.8579904;-85.6907904
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Wyoming 1100 58th St SW Wyoming MI 49509 United States;X-APPLE-RADIUS=500;X-TITLE=1100 58th St SW:geo:-85.6907904,42.8579904
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240212T083000
DTEND;TZID=America/New_York:20240216T163000
DTSTAMP:20240131T172333Z
CREATED:20240110T193305Z
LAST-MODIFIED:20240131T172333Z
UID:10006140-1707726600-1708101000@www.kendallelectric.com
SUMMARY:Accelerated Logix5000 Programmer Certificate Course Level 1
DESCRIPTION:CCP250 presented by Rockwell Automation. This accelerated course is for individuals who can quickly learn and apply Logix5000™ concepts\, terminology\, hardware\, and the Studio 5000 Logix Designer® programming environment. You will quickly move from these early concepts to using producer/ consumer technology and messages to multicast input and output devices\, share data between controllers\, and control remote I/O. This course prepares you for the Accelerated Logix5000 Programmer Certificate Course Level 1 certificate exam\, which is included in the course price. Upon completion of this course\, given a functional specification for a Logix5000 application\, you should be able to develop a project to meet the specification requirements.
URL:https://www.kendallelectric.com/event/accelerated-logix5000-programmer-certificate-course-level-1/
LOCATION:Kendall Electric – Wyoming\, 1100 58th St SW\, Wyoming\, MI\, 49509\, United States
CATEGORIES:Great Lakes North,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Software.jpg
ORGANIZER;CN="Camie White":MAILTO:camie.white@kendallelectric.com
GEO:42.8579904;-85.6907904
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Wyoming 1100 58th St SW Wyoming MI 49509 United States;X-APPLE-RADIUS=500;X-TITLE=1100 58th St SW:geo:-85.6907904,42.8579904
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20240122T123000
DTEND;TZID=America/New_York:20240126T163000
DTSTAMP:20240110T193212Z
CREATED:20240110T193212Z
LAST-MODIFIED:20240110T193212Z
UID:10006139-1705926600-1706286600@www.kendallelectric.com
SUMMARY:Studio 5000 Logix Designer Level 1: ControlLogix Fundamentals and Troubleshooting
DESCRIPTION:CCP299 presented by Rockwell Automation. Upon completion of this course\, you should be able to troubleshoot a previously operational ControlLogix® system and restore normal operation. You will have the opportunity to develop and practice these skills by: \n• Learning basic concepts and terminology used with:\n– ControlLogix system hardware\n– Studio 5000 Logix Designer® application \n• Practicing a systematic strategy for diagnosing and troubleshooting problems:\n– Configuration issues\n– Electrical noise\n– Faulty/malfunctioning field devices\n– Controller I/O\, or other hardware issues \n• Performing hands-on exercises
URL:https://www.kendallelectric.com/event/studio-5000-logix-designer-level-1-controllogix-fundamentals-and-troubleshooting-10/
LOCATION:Kendall Electric – Wyoming\, 1100 58th St SW\, Wyoming\, MI\, 49509\, United States
CATEGORIES:Great Lakes North,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Software.jpg
ORGANIZER;CN="Camie White":MAILTO:camie.white@kendallelectric.com
GEO:42.8579904;-85.6907904
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Wyoming 1100 58th St SW Wyoming MI 49509 United States;X-APPLE-RADIUS=500;X-TITLE=1100 58th St SW:geo:-85.6907904,42.8579904
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20231130T083000
DTEND;TZID=UTC:20231201T163000
DTSTAMP:20231016T211409Z
CREATED:20230914T204131Z
LAST-MODIFIED:20231016T211409Z
UID:10006005-1701333000-1701448200@www.kendallelectric.com
SUMMARY:Studio 5000 Logix Designer Level 2: Basic Ladder Logic Programming
DESCRIPTION:CCP151 presented by Rockwell Automation. After completing this course\, you should be able to program basic ladder logic instructions for Logix5000™ controllers. This is a skill-building course that provides you with the resources and hands-on practice required to complete this objective. \nYou will have an opportunity to use the Studio 5000 Logix Designer® application to perform basic software tasks to meet the requirements of a given functional specification. In addition\, you will set up a sequencer to run equipment through a predefined procedure and separate production procedure from equipment control.
URL:https://www.kendallelectric.com/event/studio-5000-logix-designer-level-2-basic-ladder-logic-programming-6/
LOCATION:Kendall Electric – Wyoming\, 1100 58th St SW\, Wyoming\, MI\, 49509\, United States
CATEGORIES:Great Lakes North,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Software.jpg
ORGANIZER;CN="Camie White":MAILTO:camie.white@kendallelectric.com
GEO:42.8579904;-85.6907904
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Wyoming 1100 58th St SW Wyoming MI 49509 United States;X-APPLE-RADIUS=500;X-TITLE=1100 58th St SW:geo:-85.6907904,42.8579904
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20231128T083000
DTEND;TZID=UTC:20231129T163000
DTSTAMP:20231016T211426Z
CREATED:20230914T204212Z
LAST-MODIFIED:20231016T211426Z
UID:10006010-1701160200-1701275400@www.kendallelectric.com
SUMMARY:Studio 5000 Logix Designer Level 1: ControlLogix System Fundamentals
DESCRIPTION:CCP146 presented by Rockwell Automation. After completing this course\, you should be able to perform basic ControlLogix® and Studio 5000 Logix Designer® tasks\, such as:\n• Creating and configuring a project\n• Communicating with a controller. \nThe course will assist you in developing and building a solid foundation with a fundamental knowledge of ControlLogix and other Logix5000™ systems. You will be introduced to basic Logix5000 concepts and terminology\, and you will be exposed to Logix5000 system hardware\, including hands-on experience with the ControlLogix platform.
URL:https://www.kendallelectric.com/event/studio-5000-logix-designer-level-1-controllogix-system-fundamentals-5/
LOCATION:Kendall Electric – Wyoming\, 1100 58th St SW\, Wyoming\, MI\, 49509\, United States
CATEGORIES:Great Lakes North,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Software.jpg
ORGANIZER;CN="Camie White":MAILTO:camie.white@kendallelectric.com
GEO:42.8579904;-85.6907904
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Wyoming 1100 58th St SW Wyoming MI 49509 United States;X-APPLE-RADIUS=500;X-TITLE=1100 58th St SW:geo:-85.6907904,42.8579904
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20231026T063000
DTEND;TZID=UTC:20231026T150000
DTSTAMP:20231005T155738Z
CREATED:20230926T175425Z
LAST-MODIFIED:20231005T155738Z
UID:10005908-1698301800-1698332400@www.kendallelectric.com
SUMMARY:Medium Voltage Term and Splicing
DESCRIPTION:Join us for an in-depth discussion on installation best practices. This session will cover underground cable\, 200A loadbreak\, 600A deadbreak\, arresters\, and terminations. Attendees will leave with a better understanding of proper installation\, which install tools to use\, and how to adjust. Our instructor will coach you on how to prep cable to install an elbow or termination during the hands-on portion.
URL:https://www.kendallelectric.com/event/medium-voltage-term-and-splicing-2/
LOCATION:Kendall Electric – Wyoming\, 1100 58th St SW\, Wyoming\, MI\, 49509\, United States
CATEGORIES:Great Lakes North,Kendall Connected Training
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Safety.jpg
ORGANIZER;CN="Marketing":MAILTO:marketing@kendallelectric.com
GEO:42.8579904;-85.6907904
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Wyoming 1100 58th St SW Wyoming MI 49509 United States;X-APPLE-RADIUS=500;X-TITLE=1100 58th St SW:geo:-85.6907904,42.8579904
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20231018T090000
DTEND;TZID=UTC:20231018T163000
DTSTAMP:20240926T141439Z
CREATED:20230830T161112Z
LAST-MODIFIED:20240926T141439Z
UID:10005979-1697619600-1697646600@www.kendallelectric.com
SUMMARY:Intro to Micro 800 PLC & PanelView 800 HMI
DESCRIPTION:This one-day class introduces both the Allen-Bradley Micro800® Controllers and PanelView® 800 Graphic Terminals\, all in one day. Training workstations consisting of a Micro850 controller\, PanelView® 800\, and utilizing Connected Components Workbench™ (CCW) software will allow students to review hardware and software basics. Students will then create controller programs and PanelView applications illustrating the interaction between the two devices. Note: This is an introduction class and is not intended as a full instructional programming class.
URL:https://www.kendallelectric.com/event/intro-to-micro-800-plc-panelview-800-hmi-2/
LOCATION:Kendall Electric – Wyoming\, 1100 58th St SW\, Wyoming\, MI\, 49509\, United States
CATEGORIES:Great Lakes North,Kendall Connected Training
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_KCT_Micro.jpg
ORGANIZER;CN="Camie White":MAILTO:camie.white@kendallelectric.com
GEO:42.8579904;-85.6907904
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Wyoming 1100 58th St SW Wyoming MI 49509 United States;X-APPLE-RADIUS=500;X-TITLE=1100 58th St SW:geo:-85.6907904,42.8579904
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20231017T090000
DTEND;TZID=UTC:20231017T090000
DTSTAMP:20230915T131631Z
CREATED:20230830T161110Z
LAST-MODIFIED:20230915T131631Z
UID:10005975-1697533200-1697533200@www.kendallelectric.com
SUMMARY:Intro to PanelView 5000
DESCRIPTION:The Panelview 5000 is the latest generation of HMI\, fully integrated with Logix controllers and programmed through Studio 5000. In this 1-day class the instructor will familiarize students with the View Designer portion of Studio 5000. Specifically\, its navigation\, binding to Logix tags\, and general project creation in this platform vs. the PanelView Plus platform.
URL:https://www.kendallelectric.com/event/intro-to-panelview-5000-6/
LOCATION:Kendall Electric – Wyoming\, 1100 58th St SW\, Wyoming\, MI\, 49509\, United States
CATEGORIES:Great Lakes North,Kendall Connected Training
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_KCT_PanelView.jpg
ORGANIZER;CN="Camie White":MAILTO:camie.white@kendallelectric.com
GEO:42.8579904;-85.6907904
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Wyoming 1100 58th St SW Wyoming MI 49509 United States;X-APPLE-RADIUS=500;X-TITLE=1100 58th St SW:geo:-85.6907904,42.8579904
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20231016T090000
DTEND;TZID=UTC:20231016T163000
DTSTAMP:20230925T132839Z
CREATED:20230830T161055Z
LAST-MODIFIED:20230925T132839Z
UID:10005972-1697446800-1697473800@www.kendallelectric.com
SUMMARY:PID Logix
DESCRIPTION:Get hands-on with Logix in these 1-day instructor-led training sessions. • Flexible – only choose the days you want • Scalable – classes cover various skill levels • Individual – students will be provided with individual lab stations.
URL:https://www.kendallelectric.com/event/pid-logix/
LOCATION:Kendall Electric – Wyoming\, 1100 58th St SW\, Wyoming\, MI\, 49509\, United States
CATEGORIES:Great Lakes North,Kendall Connected Training
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_KCT_Logix.jpg
ORGANIZER;CN="Camie White":MAILTO:camie.white@kendallelectric.com
GEO:42.8579904;-85.6907904
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Wyoming 1100 58th St SW Wyoming MI 49509 United States;X-APPLE-RADIUS=500;X-TITLE=1100 58th St SW:geo:-85.6907904,42.8579904
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20231013T090000
DTEND;TZID=UTC:20231013T163000
DTSTAMP:20230925T133747Z
CREATED:20230830T161049Z
LAST-MODIFIED:20230925T133747Z
UID:10005964-1697187600-1697214600@www.kendallelectric.com
SUMMARY:Advanced Logix
DESCRIPTION:Get hands-on with Logix in these 1-day instructor-led training sessions. • Flexible – only choose the days you want • Scalable – classes cover various skill levels • Individual – students will be provided with individual lab stations.
URL:https://www.kendallelectric.com/event/advanced-logix/
LOCATION:Kendall Electric – Wyoming\, 1100 58th St SW\, Wyoming\, MI\, 49509\, United States
CATEGORIES:Great Lakes North,Kendall Connected Training
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_KCT_Logix.jpg
ORGANIZER;CN="Camie White":MAILTO:camie.white@kendallelectric.com
GEO:42.8579904;-85.6907904
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Wyoming 1100 58th St SW Wyoming MI 49509 United States;X-APPLE-RADIUS=500;X-TITLE=1100 58th St SW:geo:-85.6907904,42.8579904
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20231012T090000
DTEND;TZID=UTC:20231012T163000
DTSTAMP:20230925T133942Z
CREATED:20230830T161039Z
LAST-MODIFIED:20230925T133942Z
UID:10005962-1697101200-1697128200@www.kendallelectric.com
SUMMARY:Intermediate Logix Troubleshooting
DESCRIPTION:Get hands-on with Logix in these 1-day instructor-led training sessions. • Flexible – only choose the days you want • Scalable – classes cover various skill levels • Individual – students will be provided with individual lab stations.
URL:https://www.kendallelectric.com/event/intermediate-logix-troubleshooting/
LOCATION:Kendall Electric – Wyoming\, 1100 58th St SW\, Wyoming\, MI\, 49509\, United States
CATEGORIES:Great Lakes North,Kendall Connected Training
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_KCT_Logix.jpg
ORGANIZER;CN="Camie White":MAILTO:camie.white@kendallelectric.com
GEO:42.8579904;-85.6907904
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Wyoming 1100 58th St SW Wyoming MI 49509 United States;X-APPLE-RADIUS=500;X-TITLE=1100 58th St SW:geo:-85.6907904,42.8579904
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20231011T090000
DTEND;TZID=UTC:20231011T163000
DTSTAMP:20230925T133954Z
CREATED:20230830T161038Z
LAST-MODIFIED:20230925T133954Z
UID:10005958-1697014800-1697041800@www.kendallelectric.com
SUMMARY:Intermediate Logix
DESCRIPTION:Get hands-on with Logix in these 1-day instructor-led training sessions. • Flexible – only choose the days you want • Scalable – classes cover various skill levels • Individual – students will be provided with individual lab stations.
URL:https://www.kendallelectric.com/event/intermediate-logix/
LOCATION:Kendall Electric – Wyoming\, 1100 58th St SW\, Wyoming\, MI\, 49509\, United States
CATEGORIES:Great Lakes North,Kendall Connected Training
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_KCT_Logix.jpg
ORGANIZER;CN="Camie White":MAILTO:camie.white@kendallelectric.com
GEO:42.8579904;-85.6907904
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Wyoming 1100 58th St SW Wyoming MI 49509 United States;X-APPLE-RADIUS=500;X-TITLE=1100 58th St SW:geo:-85.6907904,42.8579904
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20231010T090000
DTEND;TZID=UTC:20231010T163000
DTSTAMP:20230925T134009Z
CREATED:20230830T161037Z
LAST-MODIFIED:20230925T134009Z
UID:10005957-1696928400-1696955400@www.kendallelectric.com
SUMMARY:Intro to Logix Troubleshooting
DESCRIPTION:Get hands-on with Logix in these 1-day instructor-led training sessions. • Flexible – only choose the days you want • Scalable – classes cover various skill levels • Individual – students will be provided with individual lab stations.
URL:https://www.kendallelectric.com/event/intro-to-logix-troubleshooting-2/
LOCATION:Kendall Electric – Wyoming\, 1100 58th St SW\, Wyoming\, MI\, 49509\, United States
CATEGORIES:Great Lakes North,Kendall Connected Training
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_KCT_Logix.jpg
ORGANIZER;CN="Camie White":MAILTO:camie.white@kendallelectric.com
GEO:42.8579904;-85.6907904
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Wyoming 1100 58th St SW Wyoming MI 49509 United States;X-APPLE-RADIUS=500;X-TITLE=1100 58th St SW:geo:-85.6907904,42.8579904
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20231009T090000
DTEND;TZID=UTC:20231009T163000
DTSTAMP:20230925T134114Z
CREATED:20230830T161034Z
LAST-MODIFIED:20230925T134114Z
UID:10005954-1696842000-1696869000@www.kendallelectric.com
SUMMARY:Intro to Logix
DESCRIPTION:Get hands-on with Logix in these 1-day instructor-led training sessions. • Flexible – only choose the days you want • Scalable – classes cover various skill levels • Individual – students will be provided with individual lab stations.
URL:https://www.kendallelectric.com/event/intro-to-logix-3/
LOCATION:Kendall Electric – Wyoming\, 1100 58th St SW\, Wyoming\, MI\, 49509\, United States
CATEGORIES:Great Lakes North,Kendall Connected Training
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_KCT_Logix.jpg
ORGANIZER;CN="Camie White":MAILTO:camie.white@kendallelectric.com
GEO:42.8579904;-85.6907904
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Wyoming 1100 58th St SW Wyoming MI 49509 United States;X-APPLE-RADIUS=500;X-TITLE=1100 58th St SW:geo:-85.6907904,42.8579904
END:VEVENT
END:VCALENDAR