BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//Kendall Electric - ECPv6.17.1//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-WR-CALNAME:Kendall Electric
X-ORIGINAL-URL:https://www.kendallelectric.com
X-WR-CALDESC:Events for Kendall Electric
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:America/New_York
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20250309T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20251102T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20260308T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20261101T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20270314T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20271107T060000
END:STANDARD
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:UTC
BEGIN:STANDARD
TZOFFSETFROM:+0000
TZOFFSETTO:+0000
TZNAME:UTC
DTSTART:20250101T000000
END:STANDARD
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:America/Chicago
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20250309T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20251102T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20260308T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20261101T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20270314T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20271107T070000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260909T080000
DTEND;TZID=America/New_York:20260909T120000
DTSTAMP:20251117T205807Z
CREATED:20251117T204902Z
LAST-MODIFIED:20251117T205807Z
UID:10007015-1788940800-1788955200@www.kendallelectric.com
SUMMARY:NFPA 70E Arc Flash and Electrical Safety Awareness
DESCRIPTION:Everyone has responsibility for electrical safety in the workplace\, and this in-depth training will provide you with the ability to identify Arc Flash and electrical safety hazards. You will learn techniques and best practices to limit exposure to these identified hazards. Key concepts presented in this course include: \n\nHazards related to an Arc Flash/Blast\nIndustry recognized standards and regulations­—NFPA 70E\nWorker protection and OSHA compliance\nWorkplace practices to limit hazard exposure and risk\nArc Flash risk reduction solutions\n\nDuring this four hour training\, you will acquire the necessary safety detection skills\, enabling you to protect both yourself and your fellow employees.
URL:https://www.kendallelectric.com/event/nfpa-70e-arc-flash-and-electrical-safety-awareness-12/
LOCATION:Microsoft Teams\, United States
CATEGORIES:Great Lakes North,Great Lakes South,Kendall Connected Training,Mid-Atlantic,NFPA70E,South Central
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20260909T083000
DTEND;TZID=UTC:20260909T233000
DTSTAMP:20260729T133550Z
CREATED:20260729T125802Z
LAST-MODIFIED:20260729T133550Z
UID:10006749-1788942600-1788996600@www.kendallelectric.com
SUMMARY:Mechatronics Headquarters
DESCRIPTION:Step into the lab with Kendall Electric and drive your motion-control momentum. Spend a day getting hands-on with real hardware and demo boxes that turn complex concepts into practical know-how. You’ll fast-track your understanding\, explore cutting-edge mechatronics technologies\, and build a rock-solid foundation in motion control.
URL:https://www.kendallelectric.com/event/mechatronics-headquarters-7/
LOCATION:Kendall Electric – Montgomery\, 1029 Lagoon Business Loop\, Montgomery\, AL\, 36117\, United States
CATEGORIES:Kendall Technology Update,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2024/01/Mechatronics-feature-image-01.jpg
ORGANIZER;CN="Shane Howard":MAILTO:Shane.Howard@kendallelectric.com
GEO:32.4067572;-86.2182565
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Montgomery 1029 Lagoon Business Loop Montgomery AL 36117 United States;X-APPLE-RADIUS=500;X-TITLE=1029 Lagoon Business Loop:geo:-86.2182565,32.4067572
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260909T083000
DTEND;TZID=America/Chicago:20260910T163000
DTSTAMP:20260326T141056Z
CREATED:20260119T143835Z
LAST-MODIFIED:20260326T141056Z
UID:10007070-1788942600-1789057800@www.kendallelectric.com
SUMMARY:Electrical Safety for Qualified Personnel
DESCRIPTION:FND-035 presented by Rockwell Automation. \nThis is an in-depth electrical safety course that covers electrical safety including LOTO and arc flash that meets the training requirements specified in OSHA 1910 and NFPA 70E. \nUpon completion of this course\, the participants will be able to do the following: N54 \n\nDescribe general safety hazards and precautions associated with electrical systems\nDescribe electrical tool and equipment safety\nDefine voltage level conventions for electrical systems\nDescribe electrical system lockout/tagout requirements\nIdentify the requirements for working on energized equipment\nGiven a scenario\, describe the requirements associated with arc flash protection\nGiven a scenario\, discuss the proper use of personal protective equipment\nDescribe the proper use of electrical protective rubber goods\nExplain the requirements for protective grounding\nDescribe the electrical safety requirements associated with fuses\nDescribe the electrical safety requirements associated with switchgear and circuit breakers\nDescribe the electrical safety requirements for batteries and DC systems
URL:https://www.kendallelectric.com/event/electrical-safety-for-qualified-personnel-6/
LOCATION:Kendall Electric – Irondale\, 1189 Grants Mill Road\, Irondale\, AL\, 35210\, United States
CATEGORIES:Rockwell Instructor-Led,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Safety.jpg
ORGANIZER;CN="Melissa Kincaid":MAILTO:melissa.kincaid@kendallelectric.com
GEO:33.5332527;-86.6836318
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Irondale 1189 Grants Mill Road Irondale AL 35210 United States;X-APPLE-RADIUS=500;X-TITLE=1189 Grants Mill Road:geo:-86.6836318,33.5332527
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260909T083000
DTEND;TZID=America/New_York:20260911T163000
DTSTAMP:20260406T111950Z
CREATED:20260107T171050Z
LAST-MODIFIED:20260406T111950Z
UID:10007039-1788942600-1789144200@www.kendallelectric.com
SUMMARY:Ethernet/IP Configuration and Troubleshooting
DESCRIPTION:CCP183 presented by Rockwell Automation. \nThis course should prepare you to effectively: \n\nConfigure a Stratix® switch (5700\, 8000\, and/or 8300) to meet a variety of network requirements\nAssign IP addresses to devices on an EtherNet/IP network using rotary switches and a variety of software\nMonitor switch performance and status\nDiagnose and resolve issues with switches and devices on a network\n\nDuring switch configuration\, you will have an opportunity to: \n\nConfigure a switch using both the Device Manager Web Interface and Studio 5000 Logix Designer® software\nSet up one-to-one IP address translation (NAT) for segmenting machine-level network devices from the plant network\nSecure and limit access to a switch\n\nOnce the EtherNet/IP network is up and running\, you will monitor diagnostic information using web-based technologies and modify a web server module’s data views and tag values. You will resolve issues with communication between devices on a network. You will troubleshoot an EtherNet/ IP network’s media and components (including the Stratix 5700 switch); run diagnostic tests to resolve system and port issues; and perform common functions such as resetting the switch.
URL:https://www.kendallelectric.com/event/ethernet-ip-configuration-and-troubleshooting-20/
LOCATION:Kendall Electric – Holland\, 11581 Green Way Drive\, Holland\, MI\, 49424\, United States
CATEGORIES:Great Lakes North,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Networking.jpg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:42.8081538;-86.0677026
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Holland 11581 Green Way Drive Holland MI 49424 United States;X-APPLE-RADIUS=500;X-TITLE=11581 Green Way Drive:geo:-86.0677026,42.8081538
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260909T090000
DTEND;TZID=America/New_York:20260911T163000
DTSTAMP:20260211T193129Z
CREATED:20260206T141046Z
LAST-MODIFIED:20260211T193129Z
UID:10007106-1788944400-1789144200@www.kendallelectric.com
SUMMARY:Fundamentals of PowerFlex525 VFD Wiring and Comissioning
DESCRIPTION:Learn how to install\, test\, start-up\, and troubleshoot basic PowerFlex 525 VFD applications.\nLearn how to wire\, program\, and operate Variable Frequency Drives during this three-day course that covers a combination of instructor-led discussions\, demonstrations\, and hands-on labs. \nUsing a VFD workstation\, HMI module and hand-held VFD test module\, students will leave with a better understanding of various control configurations and applications. Students will also test and troubleshoot VFDs using Fluke test and measurement equipment. \nSession Topics: \n\nPowerFlex 525 and 755TS Drive Hands Labs\nTesting VFD Power Components\nAC Motor Fundamentals and Measurements\nInstallation Considerations\nPower and Control Wiring Configurations\nVFD Application Techniques and Parameter Adjustments\nEthernet Communications Configuration\nVoltage and Current Measurements using Fluke VOM® and Clamp Ammeter
URL:https://www.kendallelectric.com/event/fundamentals-of-powerflex525-vfd-wiring-and-comissioning-7/
LOCATION:Kendall Electric – Knoxville\, 170 Mabry Hood Road\, Knoxville\, TN\, 37922\, United States
CATEGORIES:Kendall Connected Training,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2025/01/drives-event-image.jpg
ORGANIZER;CN="Melissa Kincaid":MAILTO:melissa.kincaid@kendallelectric.com
GEO:35.907472;-84.1186772
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Knoxville 170 Mabry Hood Road Knoxville TN 37922 United States;X-APPLE-RADIUS=500;X-TITLE=170 Mabry Hood Road:geo:-84.1186772,35.907472
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260909T093000
DTEND;TZID=America/New_York:20260909T100000
DTSTAMP:20260615T183347Z
CREATED:20260615T183347Z
LAST-MODIFIED:20260615T183347Z
UID:10007211-1788946200-1788948000@www.kendallelectric.com
SUMMARY:Progress Session Series: MyEquipment Self-Service Onboarding
DESCRIPTION:Maximize the value of your Rockwell Automation tools and resources.\nThis session is your launchpad for mastering Rockwell Automation’s MyEquipment Self-Service tools. In just 30 minutes\, we’ll walk through how to navigate the platform\, update your installed base\, and keep your facility data aligned with your evolving plant floor. It’s all about enabling you to take control and drive progress with confidence. \nRequirements: Active MyEquipment Subscription \nProgress Session Series: These live\, web-based sessions hosted by Kendall Electric Customer Success Advocates deliver practical guidance and actionable insights to support quick onboarding\, optimize essential platforms\, and keep your team aligned with evolving operational needs and future opportunities.
URL:https://www.kendallelectric.com/event/progress-session-series-myequipment-self-service-onboarding-8/
LOCATION:Online via Microsoft Teams
CATEGORIES:Great Lakes North,Great Lakes South,Mid-Atlantic,South Central,Webinar
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2026/01/KE_KSA_Progress-Series_1600x850.jpg
ORGANIZER;CN="Corey Pool":MAILTO:corey.pool@kendallelectric.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20260909T130000
DTEND;TZID=UTC:20260909T160000
DTSTAMP:20260729T134052Z
CREATED:20260729T134052Z
LAST-MODIFIED:20260729T134052Z
UID:10007264-1788958800-1788969600@www.kendallelectric.com
SUMMARY:Mechatronics Headquarters
DESCRIPTION:Step into the lab with Kendall Electric and drive your motion-control momentum. Spend a day getting hands-on with real hardware and demo boxes that turn complex concepts into practical know-how. You’ll fast-track your understanding\, explore cutting-edge mechatronics technologies\, and build a rock-solid foundation in motion control.
URL:https://www.kendallelectric.com/event/mechatronics-headquarters-9/
LOCATION:Kendall Electric – Montgomery\, 1029 Lagoon Business Loop\, Montgomery\, AL\, 36117\, United States
CATEGORIES:Kendall Technology Update,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2024/01/Mechatronics-feature-image-01.jpg
ORGANIZER;CN="Shane Howard":MAILTO:Shane.Howard@kendallelectric.com
GEO:32.4067572;-86.2182565
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Montgomery 1029 Lagoon Business Loop Montgomery AL 36117 United States;X-APPLE-RADIUS=500;X-TITLE=1029 Lagoon Business Loop:geo:-86.2182565,32.4067572
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20260910T083000
DTEND;TZID=UTC:20260910T113000
DTSTAMP:20260729T134222Z
CREATED:20260729T130405Z
LAST-MODIFIED:20260729T134222Z
UID:10006751-1789029000-1789039800@www.kendallelectric.com
SUMMARY:Mechatronics Headquarters
DESCRIPTION:Step into the lab with Kendall Electric and drive your motion-control momentum. Spend a day getting hands-on with real hardware and demo boxes that turn complex concepts into practical know-how. You’ll fast-track your understanding\, explore cutting-edge mechatronics technologies\, and build a rock-solid foundation in motion control.
URL:https://www.kendallelectric.com/event/mechatronics-headquarters-8/
LOCATION:Kendall Electric – Irondale\, 1189 Grants Mill Road\, Irondale\, AL\, 35210\, United States
CATEGORIES:Kendall Technology Update,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2024/01/Mechatronics-feature-image-01.jpg
ORGANIZER;CN="Shane Howard":MAILTO:Shane.Howard@kendallelectric.com
GEO:33.5332527;-86.6836318
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Irondale 1189 Grants Mill Road Irondale AL 35210 United States;X-APPLE-RADIUS=500;X-TITLE=1189 Grants Mill Road:geo:-86.6836318,33.5332527
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20260910T130000
DTEND;TZID=UTC:20260910T160000
DTSTAMP:20260729T134545Z
CREATED:20260729T134545Z
LAST-MODIFIED:20260729T134545Z
UID:10007265-1789045200-1789056000@www.kendallelectric.com
SUMMARY:Mechatronics Headquarters
DESCRIPTION:Step into the lab with Kendall Electric and drive your motion-control momentum. Spend a day getting hands-on with real hardware and demo boxes that turn complex concepts into practical know-how. You’ll fast-track your understanding\, explore cutting-edge mechatronics technologies\, and build a rock-solid foundation in motion control.
URL:https://www.kendallelectric.com/event/mechatronics-headquarters-10/
LOCATION:Kendall Electric – Irondale\, 1189 Grants Mill Road\, Irondale\, AL\, 35210\, United States
CATEGORIES:Kendall Technology Update,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2024/01/Mechatronics-feature-image-01.jpg
ORGANIZER;CN="Shane Howard":MAILTO:Shane.Howard@kendallelectric.com
GEO:33.5332527;-86.6836318
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Irondale 1189 Grants Mill Road Irondale AL 35210 United States;X-APPLE-RADIUS=500;X-TITLE=1189 Grants Mill Road:geo:-86.6836318,33.5332527
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260911T090000
DTEND;TZID=America/New_York:20260911T110000
DTSTAMP:20260715T154255Z
CREATED:20260715T154255Z
LAST-MODIFIED:20260715T154255Z
UID:10006740-1789117200-1789124400@www.kendallelectric.com
SUMMARY:Traceability Workshop
DESCRIPTION:Turn end-to-end visibility into operational confidence. This training includes a 30-minute traceability seminar\, 45 minutes of hands-on RFID programming\, and a 45-minute product demonstration designed to demystify traceability within the automation environment. Attendees will learn how traceability technology can improve visibility\, strengthen accountability\, and decrease troubleshooting time.
URL:https://www.kendallelectric.com/event/traceability-workshop-18/
LOCATION:Kendall Electric – Fort Wayne\, 4621 Executive Boulevard\, Fort Wayne\, IN\, 46808\, United States
CATEGORIES:Great Lakes South,Kendall Technology Update
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2026/07/shutterstock_2235023205-scaled-tV9hOV.jpg
ORGANIZER;CN="Cameron Atkinson":MAILTO:Cameron.Atkinson@kendallelectric.com
GEO:41.1214083;-85.1668463
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Fort Wayne 4621 Executive Boulevard Fort Wayne IN 46808 United States;X-APPLE-RADIUS=500;X-TITLE=4621 Executive Boulevard:geo:-85.1668463,41.1214083
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260911T120000
DTEND;TZID=America/New_York:20260911T140000
DTSTAMP:20260715T153945Z
CREATED:20260715T153945Z
LAST-MODIFIED:20260715T153945Z
UID:10006739-1789128000-1789135200@www.kendallelectric.com
SUMMARY:Traceability Workshop
DESCRIPTION:Turn end-to-end visibility into operational confidence. This training includes a 30-minute traceability seminar\, 45 minutes of hands-on RFID programming\, and a 45-minute product demonstration designed to demystify traceability within the automation environment. Attendees will learn how traceability technology can improve visibility\, strengthen accountability\, and decrease troubleshooting time.
URL:https://www.kendallelectric.com/event/traceability-workshop-17/
LOCATION:Kendall Electric – Fort Wayne\, 4621 Executive Boulevard\, Fort Wayne\, IN\, 46808\, United States
CATEGORIES:Great Lakes South,Kendall Technology Update
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2026/07/shutterstock_2235023205-scaled-tV9hOV.jpg
ORGANIZER;CN="Cameron Atkinson":MAILTO:Cameron.Atkinson@kendallelectric.com
GEO:41.1214083;-85.1668463
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Fort Wayne 4621 Executive Boulevard Fort Wayne IN 46808 United States;X-APPLE-RADIUS=500;X-TITLE=4621 Executive Boulevard:geo:-85.1668463,41.1214083
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260914T083000
DTEND;TZID=America/New_York:20260918T163000
DTSTAMP:20260312T190940Z
CREATED:20260120T180219Z
LAST-MODIFIED:20260312T190940Z
UID:10007081-1789374600-1789749000@www.kendallelectric.com
SUMMARY:Accelerated Logix5000 Maintainer Certificate Level 1
DESCRIPTION:CCP300 presented by Rockwell Automation. This accelerated course is for individuals who can quickly learn and apply Logix5000™ concepts\, terminology\, hardware troubleshooting skills\, and interpretation of ladder logic in a Studio 5000 Logix Designer® project. This course prepares you for the Logix5000 Maintainer Certificate Course Level 1 certificate exam\, which is included in the course price. \nYou will have the opportunity to develop and practice these skills by: \n\nLearning basic concepts and terminology used with:\n\nLogix5000 system hardware\nThe Studio 5000 Logix Designer application\nRSLinx® Classic software\n\n\nPracticing a strategy for diagnosing and troubleshooting problems:\n\nConfiguration issues with controllers\, I/O\, or other hardware\nElectrical noise\nFaulty/malfunctioning field devices\nEtherNet/IP™ network issues\n\n\n\nUpon completion of this course\, you should be able to troubleshoot a previously operational Logix5000 system and restore normal operation.
URL:https://www.kendallelectric.com/event/accelerated-logix5000-maintainer-certificate-level-1/
LOCATION:Kendall Electric – Marlton\, 5 Eves Drive\, Marlton\, NJ\, 8053\, United States
CATEGORIES:Mid-Atlantic,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Software.jpg
ORGANIZER;CN="Barbara Dever":MAILTO:barbara.dever@kendallelectric.com
GEO:39.9108435;-74.9326553
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Marlton 5 Eves Drive Marlton NJ 8053 United States;X-APPLE-RADIUS=500;X-TITLE=5 Eves Drive:geo:-74.9326553,39.9108435
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260914T090000
DTEND;TZID=America/New_York:20260914T143000
DTSTAMP:20260717T203841Z
CREATED:20260715T153646Z
LAST-MODIFIED:20260717T203841Z
UID:10006738-1789376400-1789396200@www.kendallelectric.com
SUMMARY:Cybersecurity Bootcamp
DESCRIPTION:Move beyond reactive\, tool driven fixes to an intentional\, architecture-driven approach to industrial cybersecurity. This interactive training brings together Operations\, OT\, Controls\, and IT teams to explore real-world industrial incidents\, how attacks unfold\, where risk enters the plant network\, and how proven security strategies and recognized frameworks reduce exposure without disrupting operations. Through practical discussion and field-tested experience\, attendees will gain actionable insight into strengthening visibility\, resilience\, and long-term cybersecurity maturity—leaving better prepared to confidently protect their networks\, uptime\, and operations as threats continue to evolve.
URL:https://www.kendallelectric.com/event/cybersecurity-bootcamp-9/
LOCATION:Kendall Electric – Conshohocken\, 15 Colwell Lane\, Conshohocken\, PA\, 19428\, United States
CATEGORIES:Kendall Technology Update,Mid-Atlantic
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2026/05/shutterstock_2644646833-scaled-mjn5jA.jpg
ORGANIZER;CN="Jeffrey McKee":MAILTO:jeffrey.mckee@kendallelectric.com
GEO:40.0798115;-75.3104239
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Conshohocken 15 Colwell Lane Conshohocken PA 19428 United States;X-APPLE-RADIUS=500;X-TITLE=15 Colwell Lane:geo:-75.3104239,40.0798115
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260914T090000
DTEND;TZID=America/New_York:20260914T163000
DTSTAMP:20260422T183750Z
CREATED:20260206T150549Z
LAST-MODIFIED:20260422T183750Z
UID:10007116-1789376400-1789403400@www.kendallelectric.com
SUMMARY:Introduction to PanelView Plus 7
DESCRIPTION:Get hands-on with PanelView Plus 7 HMIs in these 1-day instructor-led training sessions.\n \nThis one-day technical course focuses on programming and operating the PanelView Plus 7 Graphic Terminal using FactoryTalk View and RSLinx software. Attendees will build a Logix PLC project\, develop multiple PanelView Plus 7 HMI applications\, and bind PLC tags to HMI objects through guided instruction and hands-on labs. The training emphasizes real-world configuration\, navigation\, and feature implementation to support efficient HMI development and deployment. \n\nFlexible – only choose the days you want\nScalable – classes cover various skill levels\nIndividual – students will be provided with individual lab stations
URL:https://www.kendallelectric.com/event/introduction-to-panelview-plus-7-30/
LOCATION:Kendall Electric – Lansing\, 7633 Lanac Street\, Lansing\, MI\, 48917\, United States
CATEGORIES:Great Lakes North,Kendall Connected Training
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2026/02/PanelView-Plus-7.jpeg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:42.7015802;-84.6638604
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Lansing 7633 Lanac Street Lansing MI 48917 United States;X-APPLE-RADIUS=500;X-TITLE=7633 Lanac Street:geo:-84.6638604,42.7015802
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260915T083000
DTEND;TZID=America/New_York:20260917T163000
DTSTAMP:20260406T112047Z
CREATED:20260107T171803Z
LAST-MODIFIED:20260406T112047Z
UID:10007041-1789461000-1789662600@www.kendallelectric.com
SUMMARY:GuardLogix Application Development and Troubleshooting
DESCRIPTION:SAF-LOG104 presented by Rockwell Automation. \nUpon completion of this course\, you will be able to create a Studio 5000 Logix Designer® project for a GuardLogix® system and troubleshoot a previously operational GuardLogix system. \nYou will have the opportunity to develop and practice these skills by: \n\nLearning GuardLogix concepts and terminology\nCreating and configuring a GuardLogix project:\nAdding and configuring CompactBlock™ Guard I/O™ and\nPOINT Guard I/O™ safety modules:\n\nGenerating Safety Signatures and locking/unlocking a GuardLogix controller\nProgramming safety instructions\nTroubleshooting a GuardLogix project
URL:https://www.kendallelectric.com/event/guardlogix-application-development-and-troubleshooting-19/
LOCATION:Kendall Electric – Wyoming\, 1100 58th St SW\, Wyoming\, MI\, 49509\, United States
CATEGORIES:Great Lakes North,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Safety.jpg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:42.8579904;-85.6907904
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Wyoming 1100 58th St SW Wyoming MI 49509 United States;X-APPLE-RADIUS=500;X-TITLE=1100 58th St SW:geo:-85.6907904,42.8579904
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260915T083000
DTEND;TZID=America/New_York:20260918T163000
DTSTAMP:20260406T112127Z
CREATED:20260107T171409Z
LAST-MODIFIED:20260406T112127Z
UID:10007040-1789461000-1789749000@www.kendallelectric.com
SUMMARY:FactoryTalk AssetCentre System Install and Implementation
DESCRIPTION:SFT200 presented by Rockwell Automation. \nThis course provides you with the skills required to use FactoryTalk AssetCentre software to maximize your control system investment and manage assets effectively. \nThroughout the course\, you will learn how to design a FactoryTalk AssetCentre system\, install and configure the software\, secure access to the control system\, track users actions\, manage asset configuration files\, provide backup and recovery of operating asset configurations\, and troubleshoot your system using FactoryTalk AssetCentre software. \nAfter completing this course\, you should be able to design and implement a FactoryTalk AssetCentre system\, including how to: \n\nInstall components of a FactoryTalk AssetCentre system\nConfigure FactoryTalk AssetCentre system components\nCreate and execute workflows in FactoryTalk AssetCentre for fundamental system functions\nConfigure security in a FactoryTalk system
URL:https://www.kendallelectric.com/event/factorytalk-assetcentre-system-install-and-implementation/
LOCATION:Kendall Electric – Holland\, 11581 Green Way Drive\, Holland\, MI\, 49424\, United States
CATEGORIES:Great Lakes North,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Visualization.jpg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:42.8081538;-86.0677026
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Holland 11581 Green Way Drive Holland MI 49424 United States;X-APPLE-RADIUS=500;X-TITLE=11581 Green Way Drive:geo:-86.0677026,42.8081538
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260915T083000
DTEND;TZID=America/Chicago:20260918T163000
DTSTAMP:20260326T141146Z
CREATED:20260119T164840Z
LAST-MODIFIED:20260326T141146Z
UID:10006556-1789461000-1789749000@www.kendallelectric.com
SUMMARY:Level 1: FactoryTalk Optix Basic Configuration and Deployment
DESCRIPTION:VIS150 presented by Rockwell Automation. \nUpon completion of this course\, you will be able to create and deploy FactoryTalk Optix projects. \nYou will have the opportunity to develop and practice these skills by: \n\nNavigating through the FactoryTalk Toptix studio environment and determine feature tokens\nCreate and configure the FactoryTalk Optix user interface\nConfigure and monitor data\, events\, and alarms\nCreate recipes and manage them at runtime\nDefine security for projects\, panels\, and objects
URL:https://www.kendallelectric.com/event/level-1-factorytalk-optix-basic-configuration-and-deployment-3/
LOCATION:Kendall Electric – Irondale\, 1189 Grants Mill Road\, Irondale\, AL\, 35210\, United States
CATEGORIES:Rockwell Instructor-Led,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Visualization.jpg
ORGANIZER;CN="Melissa Kincaid":MAILTO:melissa.kincaid@kendallelectric.com
GEO:33.5332527;-86.6836318
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Irondale 1189 Grants Mill Road Irondale AL 35210 United States;X-APPLE-RADIUS=500;X-TITLE=1189 Grants Mill Road:geo:-86.6836318,33.5332527
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260915T090000
DTEND;TZID=America/New_York:20260915T110000
DTSTAMP:20260715T153322Z
CREATED:20260715T153322Z
LAST-MODIFIED:20260715T153322Z
UID:10006736-1789462800-1789470000@www.kendallelectric.com
SUMMARY:Traceability Workshop
DESCRIPTION:Turn end-to-end visibility into operational confidence. This training includes a 30-minute traceability seminar\, 45 minutes of hands-on RFID programming\, and a 45-minute product demonstration designed to demystify traceability within the automation environment. Attendees will learn how traceability technology can improve visibility\, strengthen accountability\, and decrease troubleshooting time.
URL:https://www.kendallelectric.com/event/traceability-workshop-16/
LOCATION:Kendall Electric – Wabash\, 10 Ringel Ave.\, Wabash\, IN\, 46992\, United States
CATEGORIES:Great Lakes South,Kendall Technology Update
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2026/07/shutterstock_2235023205-scaled-tV9hOV.jpg
ORGANIZER;CN="Cameron Atkinson":MAILTO:Cameron.Atkinson@kendallelectric.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260915T090000
DTEND;TZID=America/New_York:20260915T163000
DTSTAMP:20260212T145812Z
CREATED:20260206T151903Z
LAST-MODIFIED:20260212T145812Z
UID:10006597-1789462800-1789489800@www.kendallelectric.com
SUMMARY:Rockwell Automation Variable Frequency Drives: Backup\, Replace\, Restore\, and Redeploy
DESCRIPTION:Get hands-on experience returning failed automation equipment back to service. \nDesigned specifically for maintenance personnel and electricians\, this one-day course gives students the opportunity to work with a fully functional automated system that contains all of the target VFDs\, PanelView terminals\, PLCs\, Servos\, & industrial switches. Students will systematically one-by-one backup\, replace\, restore\, and return to service each device using detailed step-by step and pictorially illustrated labs. \nLab manuals included in this course can be used for future reference when replacing equipment on the plant floor. \nProducts covered: \n\nVariable Frequency Drives (VFDs)\n\nPowerFlex 525\, PowerFlex 755\, PowerFlex 527\n\n\nKinetix Servos\n\nKinetix 5300\, Kinetix 5500
URL:https://www.kendallelectric.com/event/rockwell-automation-variable-frequency-drives-backup-replace-restore-and-redeploy-27/
LOCATION:Kendall Electric – Lansing\, 7633 Lanac Street\, Lansing\, MI\, 48917\, United States
CATEGORIES:Great Lakes North,Kendall Connected Training
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2025/01/drives-event-image.jpg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:42.7015802;-84.6638604
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Lansing 7633 Lanac Street Lansing MI 48917 United States;X-APPLE-RADIUS=500;X-TITLE=7633 Lanac Street:geo:-84.6638604,42.7015802
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260915T120000
DTEND;TZID=America/New_York:20260915T140000
DTSTAMP:20260715T153101Z
CREATED:20260715T153101Z
LAST-MODIFIED:20260715T153101Z
UID:10007263-1789473600-1789480800@www.kendallelectric.com
SUMMARY:Traceability Workshop
DESCRIPTION:Turn end-to-end visibility into operational confidence. This training includes a 30-minute traceability seminar\, 45 minutes of hands-on RFID programming\, and a 45-minute product demonstration designed to demystify traceability within the automation environment. Attendees will learn how traceability technology can improve visibility\, strengthen accountability\, and decrease troubleshooting time.
URL:https://www.kendallelectric.com/event/traceability-workshop-15/
LOCATION:Kendall Electric – Wabash\, 10 Ringel Ave.\, Wabash\, IN\, 46992\, United States
CATEGORIES:Great Lakes South,Kendall Technology Update
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2026/07/shutterstock_2235023205-scaled-tV9hOV.jpg
ORGANIZER;CN="Cameron Atkinson":MAILTO:Cameron.Atkinson@kendallelectric.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260916T090000
DTEND;TZID=America/New_York:20260916T143000
DTSTAMP:20260717T203935Z
CREATED:20260715T152811Z
LAST-MODIFIED:20260717T203935Z
UID:10007262-1789549200-1789569000@www.kendallelectric.com
SUMMARY:Cybersecurity Bootcamp
DESCRIPTION:Move beyond reactive\, tool driven fixes to an intentional\, architecture-driven approach to industrial cybersecurity. This interactive training brings together Operations\, OT\, Controls\, and IT teams to explore real-world industrial incidents\, how attacks unfold\, where risk enters the plant network\, and how proven security strategies and recognized frameworks reduce exposure without disrupting operations. Through practical discussion and field-tested experience\, attendees will gain actionable insight into strengthening visibility\, resilience\, and long-term cybersecurity maturity—leaving better prepared to confidently protect their networks\, uptime\, and operations as threats continue to evolve.
URL:https://www.kendallelectric.com/event/cybersecurity-bootcamp-8/
LOCATION:Kendall Electric – Bethlehem\, 2459 Baglyos Circle\, Bethlehem\, PA\, 18020\, United States
CATEGORIES:Kendall Technology Update,Mid-Atlantic
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2026/05/shutterstock_2644646833-scaled-mjn5jA.jpg
ORGANIZER;CN="Larry Murray":MAILTO:larry.murray@kendallelectric.com
GEO:40.6585138;-75.2954086
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Bethlehem 2459 Baglyos Circle Bethlehem PA 18020 United States;X-APPLE-RADIUS=500;X-TITLE=2459 Baglyos Circle:geo:-75.2954086,40.6585138
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260916T090000
DTEND;TZID=America/New_York:20260918T163000
DTSTAMP:20260212T203702Z
CREATED:20260206T143240Z
LAST-MODIFIED:20260212T203702Z
UID:10007111-1789549200-1789749000@www.kendallelectric.com
SUMMARY:Fundamentals of VFD 525 Wiring and Commissioning
DESCRIPTION:Learn how to install\, test\, start-up\, and troubleshoot basic PowerFlex 525 VFD applications.\nLearn how to wire\, program\, and operate Variable Frequency Drives during this three-day course that covers a combination of instructor-led discussions\, demonstrations\, and hands-on labs. \nUsing a VFD workstation\, HMI module and hand-held VFD test module\, students will leave with a better understanding of various control configurations and applications. Students will also test and troubleshoot VFDs using Fluke test and measurement equipment. \nSession Topics: \n\nPowerFlex 525 and 755TS Drive Hands Labs\nTesting VFD Power Components\nAC Motor Fundamentals and Measurements\nInstallation Considerations\nPower and Control Wiring Configurations\nVFD Application Techniques and Parameter Adjustments\nEthernet Communications Configuration\nVoltage and Current Measurements using Fluke VOM® and Clamp Ammeter
URL:https://www.kendallelectric.com/event/fundamentals-of-vfd-525-wiring-and-commissioning-12/
LOCATION:Kendall Electric – Lansing\, 7633 Lanac Street\, Lansing\, MI\, 48917\, United States
CATEGORIES:Great Lakes North,Kendall Connected Training
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2025/01/drives-event-image.jpg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:42.7015802;-84.6638604
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Lansing 7633 Lanac Street Lansing MI 48917 United States;X-APPLE-RADIUS=500;X-TITLE=7633 Lanac Street:geo:-84.6638604,42.7015802
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260916T093000
DTEND;TZID=America/New_York:20260916T100000
DTSTAMP:20260615T185613Z
CREATED:20260615T185613Z
LAST-MODIFIED:20260615T185613Z
UID:10007213-1789551000-1789552800@www.kendallelectric.com
SUMMARY:Progress Session Series: MyRockwell Essentials
DESCRIPTION:Maximize the value of your Rockwell Automation tools and resources.\nDiscover the essentials of Rockwell Automation’s MyRockwell portal in this 30-minute enablement session. Learn how to manage licenses\, register products\, access documentation\, and streamline your daily tasks. Whether you’re just getting started or refining your workflow\, this session is built to help you move forward with clarity and purpose. \nRequirements: Active Tech Connect\, Integrated Service Agreement\, or Kendall Service Agreement \nProgress Session Series: These live\, web-based sessions hosted by Kendall Electric Customer Success Advocates deliver practical guidance and actionable insights to support quick onboarding\, optimize essential platforms\, and keep your team aligned with evolving operational needs and future opportunities.
URL:https://www.kendallelectric.com/event/progress-session-series-myrockwell-essentials-8/
LOCATION:Online via Microsoft Teams
CATEGORIES:Great Lakes North,Great Lakes South,Mid-Atlantic,South Central,Webinar
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2026/01/KE_KSA_Progress-Series_1600x850.jpg
ORGANIZER;CN="Corey Pool":MAILTO:corey.pool@kendallelectric.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260918T090000
DTEND;TZID=America/New_York:20260918T143000
DTSTAMP:20260717T204025Z
CREATED:20260715T152322Z
LAST-MODIFIED:20260717T204025Z
UID:10007261-1789722000-1789741800@www.kendallelectric.com
SUMMARY:Cybersecurity Bootcamp
DESCRIPTION:Move beyond reactive\, tool driven fixes to an intentional\, architecture-driven approach to industrial cybersecurity. This interactive training brings together Operations\, OT\, Controls\, and IT teams to explore real-world industrial incidents\, how attacks unfold\, where risk enters the plant network\, and how proven security strategies and recognized frameworks reduce exposure without disrupting operations. Through practical discussion and field-tested experience\, attendees will gain actionable insight into strengthening visibility\, resilience\, and long-term cybersecurity maturity—leaving better prepared to confidently protect their networks\, uptime\, and operations as threats continue to evolve.
URL:https://www.kendallelectric.com/event/cybersecurity-bootcamp-7/
LOCATION:Kendall Electric – Marlton\, 5 Eves Drive\, Marlton\, NJ\, 8053\, United States
CATEGORIES:Kendall Technology Update,Mid-Atlantic
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2026/05/shutterstock_2644646833-scaled-mjn5jA.jpg
ORGANIZER;CN="Larry Murray":MAILTO:larry.murray@kendallelectric.com
GEO:39.9108435;-74.9326553
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Marlton 5 Eves Drive Marlton NJ 8053 United States;X-APPLE-RADIUS=500;X-TITLE=5 Eves Drive:geo:-74.9326553,39.9108435
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260921T083000
DTEND;TZID=America/Chicago:20260922T163000
DTSTAMP:20260326T141300Z
CREATED:20260116T143503Z
LAST-MODIFIED:20260326T141300Z
UID:10006544-1789979400-1790094600@www.kendallelectric.com
SUMMARY:Essentials of Industrial Ethernet Networks for an OT Professional
DESCRIPTION:CCP182 presented by Rockwell Automation. \nAfter completing this course\, you should be able to: \n\nDemonstrate understanding of basic Ethernet networking skills\, terminology\, and concepts\nApply these skills when performing advanced network specification\, configuration\, and troubleshooting tasks\n\nIn this course\, you will learn how to verify communications between devices\, recognize data transmission types\, and differentiate between OSI Model Layer 2 and Layer 3 switching functions. You will also identify the routing process\, monitor a switch using Device Manager and CLI commands\, and work with IOS configuration files. This course prepares you to more clearly understand key IT terms and concepts for communicating with other professionals on Connected Enterprise projects.
URL:https://www.kendallelectric.com/event/essentials-of-industrial-ethernet-networks-for-an-ot-professional-11/
LOCATION:Kendall Electric – Montgomery\, 1029 Lagoon Business Loop\, Montgomery\, AL\, 36117\, United States
CATEGORIES:Rockwell Instructor-Led,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Networking.jpg
ORGANIZER;CN="Melissa Kincaid":MAILTO:melissa.kincaid@kendallelectric.com
GEO:32.4067572;-86.2182565
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Montgomery 1029 Lagoon Business Loop Montgomery AL 36117 United States;X-APPLE-RADIUS=500;X-TITLE=1029 Lagoon Business Loop:geo:-86.2182565,32.4067572
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260921T083000
DTEND;TZID=America/New_York:20260925T163000
DTSTAMP:20260326T141405Z
CREATED:20260119T143108Z
LAST-MODIFIED:20260326T141405Z
UID:10007068-1789979400-1790353800@www.kendallelectric.com
SUMMARY:Basic Electrical Concepts
DESCRIPTION:EMS-100 presented by Rockwell Automation. \nThis course provides information on the basic concepts of direct current (DC) electricity and magnetism\, including electrostatics\, basic circuit concepts\, and measurement of electrical quantities and associated numerical concepts\, Ohm’s Law\, practical circuits\, electromagnetism\, and electrical measurements. There are hands-on exercises for device operation and simple circuit construction and analysis. \nUpon completion of this course\, you should be able to: \n\nIdentify the types of electrical energy\nDiscuss the composition of the atom and its relation to electrical charge\nExplain the characteristics of current\, voltage\, and resistance\nExplain Kirchhoff’s Current Law and Kirchhoff’s Voltage Law\nCalculate equivalent resistance of series and parallel resistive circuits\nCalculate DC circuit parameters using Ohm’s Law\, Kirchhoff’s Current Law\, and Kirchhoff’s Voltage Law\nDescribe the characteristics of capacitors and capacitance\nDescribe the characteristics of inductors and inductance\nDescribe the construction and operation of a simple AC generator\nDefine inductive reactance\nCalculate the inductive reactance of a simple AC circuit\nDefine capacitive reactance\nCalculate the capacitive reactance of a simple AC circuit\nDefine impedance\nDescribe the relationship between apparent\, true\, and reactive power\nDefine power factor as it relates to true power and apparent power
URL:https://www.kendallelectric.com/event/basic-electrical-concepts-8/
LOCATION:Kendall Electric – Chattanooga\, 6233 Airpark Drive\, Chattanooga\, TN\, 37421\, United States
CATEGORIES:Rockwell Instructor-Led,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Drives.jpg
ORGANIZER;CN="Melissa Kincaid":MAILTO:melissa.kincaid@kendallelectric.com
GEO:35.0354726;-85.1861614
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Chattanooga 6233 Airpark Drive Chattanooga TN 37421 United States;X-APPLE-RADIUS=500;X-TITLE=6233 Airpark Drive:geo:-85.1861614,35.0354726
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260921T090000
DTEND;TZID=America/New_York:20260921T163000
DTSTAMP:20260422T183842Z
CREATED:20260206T150809Z
LAST-MODIFIED:20260422T183842Z
UID:10006589-1789981200-1790008200@www.kendallelectric.com
SUMMARY:Introduction to PanelView Plus 7
DESCRIPTION:Get hands-on with PanelView Plus 7 HMIs in these 1-day instructor-led training sessions. \nThis one-day technical course focuses on programming and operating the PanelView Plus 7 Graphic Terminal using FactoryTalk View and RSLinx software. Attendees will build a Logix PLC project\, develop multiple PanelView Plus 7 HMI applications\, and bind PLC tags to HMI objects through guided instruction and hands-on labs. The training emphasizes real-world configuration\, navigation\, and feature implementation to support efficient HMI development and deployment. \n\nFlexible – only choose the days you want\nScalable – classes cover various skill levels\nIndividual – students will be provided with individual lab stations
URL:https://www.kendallelectric.com/event/introduction-to-panelview-plus-7-31/
LOCATION:Kendall Electric – Holland\, 11581 Green Way Drive\, Holland\, MI\, 49424\, United States
CATEGORIES:Great Lakes North,Kendall Connected Training
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2026/02/PanelView-Plus-7.jpeg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:42.8081538;-86.0677026
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Holland 11581 Green Way Drive Holland MI 49424 United States;X-APPLE-RADIUS=500;X-TITLE=11581 Green Way Drive:geo:-86.0677026,42.8081538
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260922T083000
DTEND;TZID=America/New_York:20260925T163000
DTSTAMP:20260406T112215Z
CREATED:20260107T172113Z
LAST-MODIFIED:20260406T112215Z
UID:10007042-1790065800-1790353800@www.kendallelectric.com
SUMMARY:Studio 5000 Logix Designer Level 3: Project Development
DESCRIPTION:CCP143 presented by Rockwell Automation. \nUpon completion of this course\, given a functional specification for a Logix5000™ application\, you should be able to develop a project to meet the specification requirements. \nThis course covers tasks common to the following hardware\, which all use the Logix5000 control engine: \n\nControlLogix® controllers\nCompactLogix™ controllers\nSoftLogix™ controllers\n\nThis course builds upon your knowledge of common controller terms and operation and your experience with basic ladder logic programming. You can gain a deeper understanding of project development tasks that are common to all Logix5000 controllers. Such tasks include organizing tasks and routines\, organizing controller data\, configuring modules\, and sharing data. You will also use producer/consumer technology for multicasting to input and output devices\, sharing data between controllers\, and controlling remote I/O.
URL:https://www.kendallelectric.com/event/studio-5000-logix-desinger-level-3-project-development/
LOCATION:Kendall Electric – Portage\, 5101 South Sprinkle Road\, Portage\, MI\, 49002\, United States
CATEGORIES:Great Lakes South,Rockwell Instructor-Led
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Software.jpg
ORGANIZER;CN="Samantha 'Sam' White":MAILTO:samantha.white@kendallelectric.com
GEO:42.2419234;-85.5300917
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Portage 5101 South Sprinkle Road Portage MI 49002 United States;X-APPLE-RADIUS=500;X-TITLE=5101 South Sprinkle Road:geo:-85.5300917,42.2419234
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260922T083000
DTEND;TZID=America/New_York:20260925T163000
DTSTAMP:20260326T141455Z
CREATED:20260119T165038Z
LAST-MODIFIED:20260326T141455Z
UID:10006557-1790065800-1790353800@www.kendallelectric.com
SUMMARY:Level 1: FactoryTalk Optix Basic Configuration and Deployment
DESCRIPTION:VIS150 presented by Rockwell Automation. \nUpon completion of this course\, you will be able to create and deploy FactoryTalk Optix projects. \nYou will have the opportunity to develop and practice these skills by: \n\nNavigating through the FactoryTalk Toptix studio environment and determine feature tokens\nCreate and configure the FactoryTalk Optix user interface\nConfigure and monitor data\, events\, and alarms\nCreate recipes and manage them at runtime\nDefine security for projects\, panels\, and objects
URL:https://www.kendallelectric.com/event/level-1-factorytalk-optix-basic-configuration-and-deployment-4/
LOCATION:Kendall Electric – Knoxville\, 170 Mabry Hood Road\, Knoxville\, TN\, 37922\, United States
CATEGORIES:Rockwell Instructor-Led,South Central
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2023/07/web_Training_RA_Visualization.jpg
ORGANIZER;CN="Melissa Kincaid":MAILTO:melissa.kincaid@kendallelectric.com
GEO:35.907472;-84.1186772
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Knoxville 170 Mabry Hood Road Knoxville TN 37922 United States;X-APPLE-RADIUS=500;X-TITLE=170 Mabry Hood Road:geo:-84.1186772,35.907472
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20260922T090000
DTEND;TZID=America/New_York:20260922T110000
DTSTAMP:20260721T135439Z
CREATED:20260715T151508Z
LAST-MODIFIED:20260721T135439Z
UID:10007260-1790067600-1790074800@www.kendallelectric.com
SUMMARY:Traceability Workshop
DESCRIPTION:Turn end-to-end visibility into operational confidence. This training includes a 30-minute traceability seminar\, 45 minutes of hands-on RFID programming\, and a 45-minute product demonstration designed to demystify traceability within the automation environment. Attendees will learn how traceability technology can improve visibility\, strengthen accountability\, and decrease troubleshooting time.
URL:https://www.kendallelectric.com/event/traceability-workshop-14/
LOCATION:Kendall Electric – Saginaw\, 5420 Davis Road\, Saginaw\, MI\, 48604\, United States
CATEGORIES:Great Lakes South,Kendall Technology Update
ATTACH;FMTTYPE=image/jpeg:https://www.kendallelectric.com/wp-content/uploads/2026/07/shutterstock_2235023205-scaled-tV9hOV.jpg
ORGANIZER;CN="Dan Pelton":MAILTO:dan.pelton@kendallelectric.com
GEO:43.4859582;-83.954911
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Kendall Electric – Saginaw 5420 Davis Road Saginaw MI 48604 United States;X-APPLE-RADIUS=500;X-TITLE=5420 Davis Road:geo:-83.954911,43.4859582
END:VEVENT
END:VCALENDAR